Home » Invacare Manuals » Wheelchairs » Invacare L-3XB » Manual Viewer

Invacare L-3XB Owners Manual - Page 3

CONTENTS, Part No. 1145807, Lynx™L-3X Scooter

Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

CONTENTS 9 WHEELS AND CASTERS 36 Removing/Installing the Drive Wheels...36 Removing/Installing the Front Wheel...38 10 BATTERIES 39 Recommended Battery Type ...40 Removing/Installing the Batteries ...41 Connecting/Disconnecting the Battery Cables ...43 Charging the Batteries ...46 11 TRANSPORTING 49 Transporting the Scooter...49 12 ACCESSORIES 51 Installing/Removing the Crutch/Cane Holder ...52 Installing/Removing the Safety Flag...53 Installing/Removing/Using the Walker Holder ...54 Installing/Removing the Rear Mounted Basket...55 13 MAINTENANCE 56 Suggested Maintenance Procedures ...56 14 TROUBLESHOOTING 57 General Troubleshooting...57 Service Indicator Error Codes...59 Part No. 1145807 3 Lynx™L-3X Scooter

Section	Page
Lynx™L-3X Scooter	1
1 General 4	2
Symbols 4	2
Limited Warranty 5	2
2 Safety 6	2
General Guidelines 6	2
Operation Information 7	2
EMI Information 15	2
3 Product Labeling 18	2
4 Technical Data 19	2
Typical Product Parameters 19	2
5 Inspection 21	2
Safety Inspection Checklists 21	2
6 Operating the Powered Scooter 24	2
Control Panel 24	2
Operating the Scooter 25	2
Engaging/Disengaging the Brake Release Lever 27	2
7 Seat and Arms 29	2
Removing/Installing the Seat 30	2
Adjusting Seat Height 31	2
Adjusting 90° Seat Swivel 32	2
Adjusting the Seat Slide 33	2
Adjusting the Arm Width 34	2
Replacing Armrest Pads 34	2
8 Tiller Adjustment 35	2
Adjusting the Tiller Angle 35	2
9 Wheels and Casters 36	3
Removing/Installing the Drive Wheels 36	3
Removing/Installing the Front Wheel 38	3
10 Batteries 39	3
Recommended Battery Type 40	3
Removing/Installing the Batteries 41	3
Connecting/Disconnecting the Battery Cables 43	3
Charging the Batteries 46	3
11 Transporting 49	3
Transporting the Scooter 49	3
12 Accessories 51	3
Installing/Removing the Crutch/Cane Holder 52	3
Installing/Removing the Safety Flag 53	3
Installing/Removing/Using the Walker Holder 54	3
Installing/Removing the Rear Mounted Basket 55	3
13 Maintenance 56	3
Suggested Maintenance Procedures 56	3
14 Troubleshooting 57	3
General Troubleshooting 57	3
Service Indicator Error Codes 59	3
1 General	4
1.1 Symbols	4
Warnings	4
Signal words are used in this manual and apply to hazards or unsafe practices which could result in personal injury or property damage. See the information below for definitions of the signal words.	4
Signal words are used in this manual and apply to hazards or unsafe practices which could result in personal injury or property damage. See the information below for definitions of the signal words.	4
m	4
danger	4
Danger indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.	4
m	4
Warning	4
Warning indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.	4
m	4
caution	4
Caution indicates a potentially hazardous situation which, if not avoided, may result in property damage or minor injury or both.	4
!	4
important	4
Indicates a hazardous situation that could result in damage to property if it is not avoided.	4
i	4
Gives useful tips, recommendations and information for efficient, trouble-free use.	4
1.2 Limited Warranty	5
i	5
PLEASE NOTE: THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY WITH FEDERAL LAW APPLICABLE TO PRODUCTS MANUFACTURED AFTER JULY 4, 1975.	5
This warranty is extended only to the original purchaser/user of our products.	5
This warranty gives you specific legal rights and you may also have other legal rights which vary from state to state.	5
Invacare warrants all electronics and electrical components (excluding batteries), transaxle and frame to be free from defects in materials and workmanship for a period of twelve (12) months from the date of purchase from Invacare or a dealer. Invaca...	5
For warranty service, please contact the dealer from whom you purchased your Invacare product. In the event you do not receive satisfactory warranty service, please write directly to Invacare at the address on the bottom of the back cover. Provide de...	5
Limitations and Exclusions: The foregoing warranty shall not apply to serial numbered products if the serial number has been removed or defaced, products subject to negligence, accident, improper operation, maintenance or storage, commercial or insti...	5
The foregoing express warranty is exclusive and in lieu of any other warranties whatsoever, whether express or implied, including the implied warranties of merchantability and fitness for a particular purpose, and the sole remedy for violations of an...	5
THIS WARRANTY SHALL BE EXTENDED TO COMPLY WITH STATE/PROVINCIAL LAWS AND REQUIREMENTS.	5
2 Safety	6
The Safety section contains important information for the safe operation and use of this product.	6
2.1 General Guidelines	6
2.1 General Guidelines	6
m	6
Warning	6
Do not use this product or any available optional equipment without first completely reading and understanding these instructions and any additional instructional material such as owner’s manuals, service manuals or instruction sheets supplied with...	6
Procedures other than those described in this manual must be performed by a qualified technician.	6
m	6
accessories Warnings	6
Invacare products are specifically designed and manufactured for use in conjunction with Invacare accessories. Accessories designed by other manufacturers have not been tested by Invacare and are not recommended for use with Invacare products.	6
Do not connect any medical devices such as ventilators, life support machines, etc., to the battery. This could cause unexpected failure of the device and the powered scooter.	6
!	6
notice	6
The information contained in this document is subject to change without notice.	6
Check all parts for shipping damage and test before using. In case of damage, do NOT use. Contact Invacare/Carrier for further instruction.	6
As a distributor of powered scooters, Invacare endeavors to supply a wide variety of powered scooters to meet many needs of the end user. However, final selection of the type of powered scooter to be used by an individual rests solely with the user a...	6
2.2 Operation Information	7
Setup	7
m	7
warning	7
Before using the scooter, verify that the motor is plugged into the harness.	7
Transport	7
m	7
WARNING	7
DO NOT operate on roads, streets or highways.	7
TIE-DOWN RESTRAINTS AND SEAT RESTRAINTS	7
Powered scooter users should NOT be transported in vehicles of any kind while in the powered scooter. As of this date, the Department of Transportation has not approved any tie-down systems for transportation of a user while in a powered scooter, in ...	7
It is Invacare’s position that users of powered scooters should be transferred into appropriate seating in vehicles for transportation and use be made of the restraints made available by the auto industry. Invacare cannot and does not recommend any...	7
m	8
WARNING	8
stairways and escalators	8
DO NOT attempt to move an occupied powered scooter between floors using a stairway. Use an elevator to move an occupied powered scooter between floors.	8
If moving a powered scooter between floors by means of a stairway, the occupant MUST be removed and transported independently of the powered scooter. Extreme caution is advised when moving an unoccupied powered scooter up or down the stairs. Invacare...	8
DO NOT attempt to lift the powered scooter by any removable (detachable) parts. Lifting by means of any removable (detachable) parts of a powered scooter may result in injury to the user or damage to the powered scooter.	8
DO NOT use an escalator to move a powered scooter between floors. Serious bodily injury may occur.	8
Powered scooter with batteries and seat weighs 158 lbs. Powered scooter without the batteries can weigh between 80 and 89 lbs. Use proper lifting techniques (lift with your legs) to avoid injury.	8
DO NOT attempt to lift the powered scooter by its tiller, seat or shrouds.	8
If scooter is exposed to extreme temperature (above 100°F or below 32°F), high humidity and/or becomes wet, prior to use, ensure handgrips DO NOT twist on scooter handles. Otherwise, damage or injury may occur.	8
Follow this procedure for moving the powered scooter between floors when an elevator is not available:	8
1. Remove the occupant from the powered scooter.	8
2. Disassemble the scooter. Refer to Transporting the Scooter on page 34.	8
3. Carefully move the powered scooter components up or down the stairway.	8
4. Once all the components of the scooter are transported to the desired location reassemble the scooter. Refer to Transporting the Scooter on page 34.	8
Repair or Service Information	9
m	9
WARNING	9
Scooters should be examined during maintenance for signs of corrosion (water exposure, incontinence, etc.). Electrical components damaged by corrosion should be replaced immediately.	9
Scooters that are used by incontinent users and/or are frequently exposed to water may require replacement of electrical components more frequently.	9
Set-up of the Electronics Control Unit is to be performed only by a qualified technician. The final adjustments of the controller may affect other activities of the scooter. Damage to the equipment could occur if improperly set-up or adjusted.	9
DO NOT service or adjust your powered scooter while occupied, unless otherwise noted.	9
DO NOT overtighten hardware attaching to the frame. This could cause damage to the frame tubing.	9
Safety/Handling of Powered Scooters	9
“Safety and Handling” of the powered scooter requires the close attention of the user. This manual points out the most common procedures and techniques involved in the safe operation and maintenance. It is important to practice and master these s...	9
Use this information only as a “basic” guide. The techniques that are discussed have been used successfully by many. Individual users often develop skills to deal with daily living activities that may differ from those described in this manual. I...	9
m	10
warning	10
Do not make sharp turns in the forward or reverse direction at excessive speed. Failure to observe the warning can cause the scooter to tip over and may result in injury to user and/or damage to the product.	10
ALWAYS wear your seat positioning strap. Inasmuch as the seat positioning strap is an option on this scooter (you may order with or without the seat positioning strap), Invacare strongly recommends ordering the seat positioning strap as an additional...	10
DO NOT attempt to reach objects if you have to move forward in the seat or pick them up from the floor by reaching between your knees.	10
To assure stability and proper operation of your powered scooter, you must, at all times, maintain proper balance. Your powered scooter has been designed to remain upright and stable during normal daily activities.	10
Many activities require the scooter owner to reach, bend and transfer in and out of the powered scooter. These movements cause a change to the normal balance, the center of gravity, and the weight distribution of the powered scooter. To determine and...	10
m	11
warning	11
Be aware that carrying heavy objects on your lap while occupying the scooter may adversely affect the stability of the scooter, resulting in serious bodily injury to the user, damage to the scooter and surrounding property.	11
This scooter has been designed to accommodate one individual. If more than one individual occupies the scooter this may adversely affect the stability of the scooter, resulting in serious bodily injury to the user and passenger and damage to the scoo...	11
DO NOT stand on the frame of the powered scooter while driving.	11
DO NOT stand on the shroud(s) of the powered scooter.	11
DO NOT lean over the top of the back upholstery to reach objects behind you, as this may cause the powered scooter to tip over.	11
DO NOT shift your weight or sitting position toward the direction you are reaching as the powered scooter may tip over.	11
Determine and establish your particular safety limits by practicing bending, reaching and transferring activities in the presence of a qualified healthcare professional before attempting active use of the powered scooter.	11
For individuals with balance problems, do not attempt to transfer into or out of the powered scooter without assistance. Practice transferring activities with an assistant in the presence of a qualified healthcare professional.	11
Performance adjustments should only be made by professionals of the healthcare field or persons fully conversant with this process and the driver's capabilities. Incorrect settings could cause injury to the driver, bystanders and damage to the scoote...	11
DO NOT operate the powered scooter until you have checked that the surroundings are clear and that the area is safe for travel.	11
DO NOT operate on roads, streets or highways.	11
DO NOT attempt to move up or down an incline with water, ice or oil film.	11
Avoid operating the scooter in dark or poorly lit areas.	11
DO NOT climb and/or go up or down ramps or traverse slopes greater than 8°.	11
m	12
warning	12
When negotiating ramps, if the throttle control lever is released while in the forward motion, the powered scooter will roll back approximately one foot before the brake engages. If the throttle control lever is released while in the reverse motion, ...	12
DO NOT attempt to drive over curbs or obstacles. Doing so may cause your powered scooter to turn over and cause bodily harm and/or damage to the scooter.	12
Before attempting to sit in or exit the powered scooter, remove the key from the ignition. This will ensure that the power is off and the powered scooter will not drive.	12
DO NOT remove the key or shut off while the powered scooter is in motion.	12
Do not operate the powered scooter without the rear shroud installed, to avoid injury and/or damage to scooter.	12
Ensure that the seat is properly locked before use. Otherwise the user may fall from the scooter resulting in bodily harm. Attempting unsafe transfers may cause the user to fall, resulting in serious injury.	12
Ensure that the seat is locked in the forward position before and during the operation of the scooter. Otherwise, injury to the user and/or damage to the scooter may result.	12
Ensure that the tiller is properly adjusted before driving the scooter.	12
After making any tiller angle adjustment and before use, the tiller must be securely locked into position. Otherwise the user may fall from the scooter resulting in bodily harm and/or damage to the scooter. Gently push/pull the tiller to ensure that ...	12
ALWAYS keep hands and fingers clear of moving parts to avoid injury.	12
ALWAYS check hand grips for looseness before using the powered scooter. If loose and/or worn, replace immediately.	12
Never leave an unoccupied scooter on an incline.	12
Always use anti-tippers. When outdoors on wet, soft ground or on gravel surfaces, anti-tippers may not provide the same level of protection against tip over. Extra caution must be observed when traversing such surfaces.	12
Storage	13
m	13
warning	13
Rain Test	13
Invacare has tested its powered scooters in accordance with ISO 7176 “Rain Test”. This provides the end user or his/her attendant sufficient time to remove his/her powered scooter from a rain storm and retain powered scooter operation.	13
DO NOT leave the powered scooter in a rain storm of any kind.	13
DO NOT use the powered scooter in a shower.	13
DO NOT leave the powered scooter in a damp area for any length of time.	13
Direct exposure to rain or dampness will cause the scooter to malfunction electrically and mechanically; may cause the powered scooter to prematurely rust.	13
Check to ensure that all electrical connections are secure at all times.	13
Remove the key from the ignition while the powered scooter is not in use so as to avoid injury and/or damage to the scooter and surrounding areas.	13
Avoid storing or using the scooter near open flame or combustible products. Serious injury or damage to property may result.	13
Electrical and Grounding	14
c	14
warning	14
Check to ensure that all electrical connections are secure at all times.	14
Grounding Instructions	14
DO NOT, under any circumstances, cut or remove the round grounding prong from any plug used with or for Invacare products. Some devices are equipped with three-prong (grounding) plugs for protection against possible shock hazards. Where a two-prong w...	14
Battery	14
m	14
warning	14
The warranty and performance specifications contained in this manual are based on the use of deep cycle gel cell batteries. Invacare strongly recommends their use as the power source for this unit.	14
Carefully read battery/battery charger information prior to installing, servicing or operating your powered scooter.	14
Weight Training	14
m	14
warning	14
Invacare DOES NOT recommend the use of its powered scooters as a weight training apparatus. Invacare powered scooters have NOT been designed or tested as a seat for any kind of weight training. If occupant uses said powered scooter as a weight traini...	14
Weight Limitation	15
m	15
warning	15
The weight limitation is 300 lbs.	15
Disposal	15
warning	15
This product has been supplied from an environmentally aware manufacturer that complies with the Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/CE.	15
This product may contain substances that could be harmful to the environment if disposed of in places (landfills) that are not appropriate according to legislation.	15
Please be environmentally responsible and recycle this product through your recycling facility at its end of life.	15
2.1 EMI Information	15
m	15
caution	15
IT IS VERY IMPORTANT THAT YOU READ THIS INFORMATION REGARDING THE POSSIBLE EFFECTS OF ELECTROMAGNETIC INTERFERENCE ON YOUR POWERED WHEELCHAIR.	15
Electromagnetic Interference (EMI) From Radio Wave Sources	15
Powered wheelchairs and motorized scooters (in this text, both will be referred to as powered wheelchairs) may be susceptible to electromagnetic interference (EMI), which is interfering electromagnetic energy (EM) emitted from sources such as radio s...	15
There are a number of sources of relatively intense electromagnetic fields in the everyday environment. Some of these sources are obvious and easy to avoid. Others are not apparent and exposure is unavoidable. However, we believe that by following th...	15
The sources of radiated EMI can be broadly classified into three types:	16
1. Hand-held Portable transceivers (transmitters-receivers with the antenna mounted directly on the transmitting unit. Examples include: citizens band (CB) radios, “walkie talkie”, security, fire and police transceivers, cellular telephones, and ...	16
i	16
Some cellular telephones and similar devices transmit signals while they are ON, even when not being used.	16
2. Medium-range mobile transceivers, such as those used in police cars, fire trucks, ambulances and taxis. These usually have the antenna mounted on the outside of the vehicle; and	16
3. Long-range transmitters and transceivers, such as commercial broadcast transmitters (radio and TV broadcast antenna towers) and amateur (HAM) radios.	16
i	16
Other types of hand-held devices, such as cordless phones, laptop computers, AM/FM radios, TV sets, CD players, cassette players, and small appliances, such as electric shavers and hair dryers, so far as we know, are not likely to cause EMI problems ...	16
Powered Wheelchair Electromagnetic Interference (EMI)	16
Because EM energy rapidly becomes more intense as one moves closer to the transmitting antenna (source), the EM fields from hand-held radio wave sources (transceivers) are of special concern. It is possible to unintentionally bring high levels of EM ...	16
Electromagnetic interference (EMI) from sources such as radio and TV stations, amateur radio (HAM) transmitters, two-way radios, and cellular phones can affect powered wheelchairs and motorized scooters.	16
Following the warnings listed below should reduce the chance of unintended brake release or powered wheelchair movement which could result in serious injury.	16
m	17
warning	17
1) DO NOT operate hand-held transceivers (transmitters receivers), such as citizens band (CB) radios, or turn ON personal communication devices, such as cellular phones, while the powered wheelchair is turned ON;	17
2) Be aware of nearby transmitters, such as radio or TV stations, and try to avoid coming close to them;	17
3) If unintended movement or brake release occurs, turn the powered wheelchair OFF as soon as it is safe;	17
4) Be aware that adding accessories or components, or modifying the powered wheelchair, may make it more susceptible to EMI (Note: There is no easy way to evaluate their effect on the overall immunity of the powered wheelchair); and	17
5) Report all incidents of unintended movement or brake release to the powered wheelchair manufacturer, and note whether there is a source of EMI nearby.	17
Important Information	17
1) 20 volts per meter (V/m) is a generally achievable and useful immunity level against EMI (as of May 1994) (the higher the level, the greater the protection);	17
2) This device has been tested to a radiated immunity level of 20 volts per meter.	17
3) The immunity level of the product is unknown.	17
Modification of any kind to the electronics of this scooter as manufactured by Invacare may adversely affect the EMI immunity levels.	17
3 Product Labeling	18
3 Product Labeling	18
NOTE: The battery wiring label is on the underside of the battery box lid.	18
4 Technical Data	19
4.1 Typical Product Parameters	19
Overall Dimensions	19
Overall Dimensions	19
LYNX L-3X	19
Base Length:	19
Base Width:	19
Step Height (Floor Pan to Ground):	19
Seat Height (Floor Pan to Seat Cushion):	19
Overall Height:	19
Seat Dimensions	19
LYNX L-3X	19
Width:	19
Depth:	19
Back Height:	19
Arm Dimensions	19
LYNX L-3X	19
Length:	19
Height between Seat and Arms:	19
Minimum Width Between Arms:	19
Wheels	20
LYNX L-3X	20
Front Wheel:	20
Drive Wheel:	20
Driving	20
LYNX L-3X	20
Speed Range:	20
Maximum Incline Capability:	20
Turning Radius:	20
Weight	20
LYNX L-3X	20
Front Base Section:	20
Rear Base Section:	20
Batteries:	20
Seat:	20
Basket:	20
Total Weight of Product:	20
Maximum Weight Limitation:	20
5 Inspection	21
5.1 Safety Inspection Checklists	21
5.1 Safety Inspection Checklists	21
i	21
Every six months take your powered scooter to a qualified technician for a thorough inspection and servicing. Regular cleaning will reveal loose or worn parts and enhance the smooth operation of your powered scooter. To operate properly and safely, y...	21
m	21
warning	21
Before performing any maintenance, adjustment or service, turn power Off and remove key from ignition.	21
caution	21
As with any vehicle, the wheels and tires should be checked periodically for cracks and wear, and should be replaced.	21
Initial adjustments should be made to suit your personal body structure needs and preference. Thereafter follow these maintenance procedures:	21
Inspect/Adjust Initially	22
Ensure powered scooter drives straight (no excessive drag or pull to one side).	22
Check frame for damage and corrosion.	22
Ensure that the brake release lever is easy to engage/disengage.	22
Ensure that tiller adjustment mechanism engages and disengages properly and securely.	22
Ensure that the scooter stops completely when throttle is released (i.e., does not continue to roll as if the throttle is activated).	22
Clean upholstery and armrests.	22
Ensure armrest pad sits flush against arm tube.	22
Inspect the seat upholstery for rips and tears.	22
Inspect seat swivel for release and engagement (seat locks into the determined swivel positions).	22
Inspect for excessive side movement or binding when the drive wheels are raised or turned.	22
Inspect front wheel/fork assembly for proper tension by spinning the wheel. The front wheel should come to a gradual stop.	22
Check the front fork for damage or corrosion.	22
Tighten locknut if the front wheel wobbles noticeably or loosen locknut if the wheel binds to a stop.	22
Ensure that wheel bearings are clean and free of moisture.	22
Ensure that the bolts and fasteners on the caster assemblies are tight.	22
Inspect tires for flat spots and wear.	22
Clean molded body shrouds.	22
Check that all labels are present and legible.	22
Inspect/Adjust Weekly	22
Ensure that tiller adjustment mechanism engages and disengages properly and securely.	22
Ensure that the scooter stops completely when throttle is released (i.e., does not continue to roll as if the throttle is activated).	22
Inspect tires for flat spots and wear.	22
Inspect/Adjust Monthly	23
Check brake for binding or interference with travel.	23
Inspect front wheel/fork assembly for proper tension by spinning the wheel. The front wheel should come to a gradual stop.	23
Tighten locknut if the front wheel wobbles noticeably or loosen locknut if the wheel binds to a stop.	23
Inspect seat swivel for release and engagement (seat locks into the determined swivel positions).	23
Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify that the hardware that attaches the seat positioning strap to the frame is secure and undamaged. Replace if necessary.	23
Ensure that the bolts and fasteners on the caster assemblies are tight.	23
Inspect/Adjust Periodically	23
Ensure that the powered scooter drives straight (no excessive drag or pull to one side).	23
Check frame for damage and corrosion.	23
Ensure that the brake release lever is easy to engage/disengage.	23
Inspect for no excessive side movement or binding when the drive wheels are raised or turned.	23
Check front fork for damage or corrosion.	23
Ensure wheel bearings are clean and free of moisture.	23
Clean upholstery and armrests.	23
Inspect the seat upholstery for rips and tears.	23
Ensure armrest pad sits flush against arm tube.	23
Check that all labels are present and legible.	23
Inspect electrical components for signs of corrosion. Replace if corroded or damaged.	23
6 Operating the Powered Scooter	24
6.1 Control Panel	24
6.1 Control Panel	24
i	24
For this procedure, refer to FIGURE 6.1 on page 25.	24
1. Speed Control Knob - The speed control knob is located on the right side of the control panel. The Turtle icon represents the slowest speed and the Rabbit icon represents the fastest speed.	24
2. Battery Charge Display - The battery charge display is located at the top center of the control panel. When the scooter is turned on, the needle on the battery charge display will move to the right to indicate the amount of battery charge. The amo...	24
m	24
warning	24
When negotiating ramps, if the throttle control lever is released while in forward motion, the powered scooter will roll back approximately one foot before brake engages. If the throttle control lever is released while in reverse motion the powered s...	24
3. Key - The key is just below the control panel. Turn the key:	24
• To the Left - Turn the scooter off.	24
• To the Right - Turn the scooter on.	24
4. Horn Button - The horn button is located on left side of the control panel.	24
5. Throttle Control Lever - The throttle control lever is located in front of the handles on the tiller assembly.	24
6. Service Indicator - The service indicator will flash if there is a problem with the scooter. The number of flashes indicates the type of error. Refer to Service Indicator Error Codes on page 59.	24
Battery Charge Display	25
FIGURE 6.1 Control Panel	25
6.2 Operating the Scooter	25
m	25
warning	25
After any adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result.	25
Do not make sharp turns in the forward or reverse direction at excessive speed. Failure to observe the warning can cause the scooter to tip over and may result in injury to user and/ or damage to the product.	25
To determine and establish your particular safety limits, practice bending, reaching and transferring activities in several combinations in the presence of a qualified healthcare professional before attempting active use of the powered scooter.	25
Ensure seat is properly locked before attempting transfer into or out of the powered scooter. Attempting unsafe transfers may cause a fall from the powered scooter resulting in bodily injury.	25
For individuals with balance problems, practice transferring activities with an assistant in the presence of a qualified healthcare professional. DO NOT attempt to transfer into or out of the powered scooter without assistance.	25
1. Before operating the powered scooter, review Control Panel on page 24.	26
2. Install the batteries. Refer to Removing/Installing the Batteries on page 41.	26
3. Charge the batteries. Refer to Charging the Batteries on page 46.	26
4. Transferring to and from the seat can be accomplished in one of two ways:	26
• Flipping up the armrest makes entering/exiting easier.	26
• Rotating seat to the direction of transfer. Refer to Adjusting 90° Seat Swivel on page 32.	26
5. Once you have transferred into the seat, rotate seat to the forward position and flip arms down.	26
6. Adjust the tiller to a comfortable angle. Refer to Adjusting the Tiller Angle on page 35.	26
7. Adjust speed control knob to the appropriate setting.	26
i	26
For driving indoors or on uneven terrain, a slower speed is recommended. For soft terrain or steep inclines (no greater than 8°), a faster speed may be necessary.	26
8. Insert the key into the ignition and turn it to the on position.	26
m	26
warning	26
Always depress the throttle control lever gradually. This will ensure smooth safe starts.	26
i	26
Throttle control levers operate such that moving one will also move the opposite side throttle control lever.	26
9. To operate the scooter, depress the throttle control lever in the following manner:	26
• To Move Forward - Push the right side throttle control lever (away from the user) or pull the left side throttle control lever towards the user).	26
• To Move in Reverse - Push the left side throttle control lever (away from the user) or pull the right side throttle control lever (towards the user).	26
• To Stop - Release the throttle control lever and the powered scooter will quickly slow down and the brake will engage.	26
i	27
To equip the scooter for left hand operation, contact a qualified technician.	27
The powered scooter is equipped with a “proportional” control meaning that the farther you depress the throttle control lever, the faster the powered scooter travels. With a proportional control, you can drive as slowly in the high speed setting ...	27
When first learning to drive, adjust speed control knob for a slow speed and try to drive the powered scooter as slowly as possible by depressing the throttle control lever only slightly. This exercise will help you learn to utilize the full potentia...	27
6.3 Engaging/Disengaging the Brake Release Lever	27
m	27
warning	27
Ensure that the brake-release lever is in the engaged position before driving. There should be an audible “click” when stopping and starting the scooter.	27
i	27
For this procedure, refer to FIGURE 6.2 on page 28.	27
The brake release lever manually engages and disengages the brake. The brake release lever is located under the seat on the right side.	27
The brake must be engaged in normal driving conditions. Activation of the throttle control lever automatically releases the brake so that the powered scooter can drive. Releasing the throttle control lever automatically engages the brake so as to pre...	27
When the brake release lever is disengaged and the key is removed, the powered scooter can be pushed. The powered scooter cannot be driven with the brake in the disengaged position.	27
1. To Engage the Brake Release Lever (Drive) - Push the brake release lever down.	27
2. To Disengage the Brake Release Lever (Push) - Pull the brake release lever up.	27
Brake Release Lever	28
FIGURE 6.2 Engaging/Disengaging the Brake Release Lever	28
7 Seat and Arms	29
7 Seat and Arms	29
m	29
warning	29
After any adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result.	29
Before performing any maintenance, adjustment or service, turn power off and remove key from ignition.	29
i	29
Refer to Label Locations on page 9 for pinch point location.	29
7.1 Removing/Installing the Seat	30
m	30
warning	30
Before use, ensure that the seat is in the locked position. The seat lever must be pulled up to the 90° position to allow the seat to drop into the locked position. Otherwise, a fall from the scooter could occur causing bodily injury and/or damage t...	30
i	30
For this procedure, refer to FIGURE 7.1.	30
The seat lock lever is located on the left side of the seat.	30
Removing	30
1. Fold down seat back.	30
2. Pull up the seat lock lever.	30
3. Lift the seat assembly up and away from the seat post.	30
Installing	30
1. Lower the seat assembly onto the seat post.	30
2. Pull the seat lock lever up to allow the seat to drop into the locked position.	30
3. Lift up on seat assembly to ensure the seat is secure.	30
Seat Lock Lever	30
FIGURE 7.1 Removing/Installing the Seat	30
7.2 Adjusting Seat Height	31
i	31
For this procedure, refer to FIGURE 7.2.	31
1. Remove the seat. Refer to Removing/Installing the Seat on page 30.	31
2. Remove the mounting bolt, two curved washers and lock nut securing the seat post to the frame tube.	31
3. Align the frame tube mounting hole with one of three seat post mounting holes to achieve desired seat height.	31
4. Using the mounting bolt, two curved washers and locknut, secure the seat post to the frame tube.	31
5. Install the seat. Refer to Removing/Installing the Seat on page 30.	31
Seat Post	31
FIGURE 7.2 Adjusting Seat Height	31
7.3 Adjusting 90° Seat Swivel	32
m	32
warning	32
Ensure that seat is locked into the forward position before and during operation of the scooter. Otherwise, injury to the user and/or damage to the scooter may result.	32
caution	32
Use the seat swivel option with caution when accessories are installed (such as safety flag, crutch/cane holder, etc.). Otherwise, damage to the scooter or property may occur.	32
i	32
For this procedure, refer to FIGURE 7.3.	32
1. Pull up the seat lock lever to unlock the seat.	32
2. Rotate the seat to the desired position.	32
3. Release the seat lock lever to lock the seat in the desired position.	32
i	32
Ensure that the seat is locked in the forward facing position before operating the scooter.	32
Seat	32
FIGURE 7.3 Adjusting 90° Seat Swivel	32
7.4 Adjusting the Seat Slide	33
i	33
For this procedure, refer to FIGURE 7.4.	33
1. Lift the seat slide lever located on the right side of the seat.	33
2. Slide the seat forward or back to the desired position.	33
3. Release the seat slide lever and allow the seat to lock into position.	33
Seat	33
FIGURE 7.4 Adjusting the Seat Slide	33
7.5 Adjusting the Arm Width	34
i	34
For this procedure, refer to FIGURE 7.5.	34
When installing the arms during set up, the four mounting screws are installed on the seat hinge for shipping purposes.	34
1. Loosen the knob securing the arm tube to the seat frame.	34
2. Push the arm in or out to the desired position.	34
Arm Tube	34
FIGURE 7.5 Adjusting the Arm Width	34
7.6 Replacing Armrest Pads	34
i	34
For this procedure, refer to FIGURE 7.6.	34
1. Remove the two mounting screws that secure the armrest pad to arm.	34
2. Remove the old armrest pad.	34
3. Install new armrest pad and securely tighten with existing mounting screws.	34
4. If necessary, repeat STEPS 1-3 to replace the other armrest pad.	34
Arm Pad	34
FIGURE 7.6 Replacing Armrest Pads	34
8 Tiller Adjustment	35
8.1 Adjusting the Tiller Angle	35
8.1 Adjusting the Tiller Angle	35
m	35
warning	35
Before performing any maintenance, adjustment or service, turn power Off and remove key from ignition.	35
Ensure that tiller is properly adjusted before driving the scooter.	35
After making any tiller angle adjustments and before use, the tiller MUST be securely locked into position. Otherwise, a fall from the scooter could occur causing bodily injury and/or damage to the scooter. Gently, push/pull against tiller to ensure ...	35
i	35
For this procedure, refer to FIGURE 8.1.	35
The powered scooters feature an adjustable tiller. The tiller locks into one of three positions. The tiller can also be folded down for transportation and storage.	35
1. Rotate or pull out the tiller adjustment lever until the pin disengages from the mounting hole.	35
2. Move the tiller to the desired position.	35
3. Release or rotate the tiller adjustment lever to lock the pin into the desired mounting hole.	35
4. Gently push/pull against tiller to ensure that the tiller is securely locked.	35
Tiller Adjustment Lever	35
FIGURE 8.1 Adjusting the Tiller Angle	35
9 Wheels and Casters	36
9 Wheels and Casters	36
m	36
warning	36
After any adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result.	36
Before performing any maintenance, adjustment or service, turn power Off and remove key from ignition.	36
9.1 Removing/Installing the Drive Wheels	36
i	36
For this procedure, refer to FIGURE 9.1 on page 37.	36
Removing	36
1. Turn power off and remove the key from the ignition.	36
2. Remove the seat. Refer to Removing/Installing the Seat on page 27.	36
3. Place the rear frame assembly (not shown) up on blocks so that the drive wheels are off the ground.	36
4. Remove the cap, nut, large washer and small washer that secure the drive wheel to the drive shaft.	36
5. Remove the existing drive wheel assembly from the drive shaft.	36

Match case Limit results 1 per page

CONTENTS

Part No. 1145807

Lynx™L-3X Scooter

WHEELS AND CASTERS

Removing/Installing the Drive Wheels

..............................................................................................................................................................................................

Removing/Installing the Front Wheel

................................................................................................................................................................................................

BATTERIES

Recommended Battery Type

..............................................................................................................................................................................................................

Removing/Installing the Batteries

.......................................................................................................................................................................................................

Connecting/Disconnecting the Battery Cables

...............................................................................................................................................................................

Charging the Batteries

TRANSPORTING

Transporting the Scooter

ACCESSORIES

Installing/Removing the Crutch/Cane Holder

.................................................................................................................................................................................

Installing/Removing the Safety Flag

.....................................................................................................................................................................................................

Installing/Removing/Using the Walker Holder

...............................................................................................................................................................................

Installing/Removing the Rear Mounted Basket

................................................................................................................................................................................

MAINTENANCE

Suggested Maintenance Procedures

..................................................................................................................................................................................................

TROUBLESHOOTING

General Troubleshooting

Service Indicator Error Codes