Invacare TDXSC2-CG Owners Manual 2 - Page 103
Van Seats
View all Invacare TDXSC2-CG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Van Seats 7 SETUP/MAINTENANCE For this procedure, refer to FIGURE 9. Take note of the position and orientation of mounting hardware for reinstalling the joystick assembly. 1. Turn the adjustment lock lever to release the joystick mounting tube from the mounting bracket. 2. Remove the joystick mounting tube from the wheelchair. 3. Remove the three hex mounting screws, bushings and locknuts that secure the mounting bracket to the three mounting holes on the armrest plate. The mounting bracket is mounted to the inside of the armrest plate. 4. Reposition the mounting bracket on the opposite armrest plate. 5. Using the three hex mounting screws, bushings and locknuts secure the mounting bracket to the three mounting holes of the armrest plate. 6. If necessary, perform the following to reposition the adjustment lock: A. Slide the adjustment lock from the mounting bracket. B. Rotate adjustment lock 180° and slide adjustment lock over the opposite end of the mounting bracket. 7. Slide joystick mounting tube through the mounting bracket to the desired position and secure adjustment lock to tube by turning lever on adjustment lock. Armrest Plate Mounting Bracket Bushings Hex Mounting Screws Adjustment Lock Lever Joystick Mounting Tube Joystick not shown. Locknuts Part No 1149267 FIGURE 9 Repositioning Joystick - Van Seats 103 Invacare® TDX® SC, Invacare TDX Spree