JVC AR780 Instruction Manual - Page 21

Listening to the satellite radio ENGLISH Before operating, connect either one of the following (separately purchased) to the CD changer jack on the rear of this unit. See also page 27. • JVC SIRIUS radio DLP-Down Link Processor, for listening to the SIRIUS Satellite radio. • XMDirect™ Universal Tuner Box-Using a JVC Smart Digital Adapter (XMDJVC100: not supplied), for listening to the XM Satellite radio. • Refer also to the Instructions supplied with your SIRIUS Satellite radio or XM Satellite radio. GCI (Global Control Information) update • If channels are updated after subscription, updating starts automatically. The following appears and no sound can be heard: - For SIRIUS Satellite radio: "Channels Updating XX%* Completed" - For XM Satellite radio: "UPDATING" • Update takes a few minutes to complete. • During update, you cannot operate your satellite radio. * Changes every 20% of update is completion (ex. 20%, 40%, 60%) Activate your SIRIUS subscription after connection 1 3 Check your SIRIUS ID, see page 33. 4 Contact SIRIUS on the internet at to activate your subscription, or you can call SIRIUS toll-free at 1-888-539-SIRIUS (7474). "Subscription Updated Press Any Key to Continue" appears on the display once subscription has been completed. Activate your XM subscription after connection • Only Channel 0, 1, and 247 are available before activation. 1 2 XMDirect™ Universal Tuner Box starts updating all the XM channels. "Channel 1" is tuned in automatically. 3 Check your XM Satellite radio ID labelled on the casing of the XMDirect™ Universal Tuner Box, or tune in to "Channel 0" (see page 22). 2 JVC DLP starts updating all the SIRIUS channels. 4 Contact XM Satellite radio on the internet at to activate your subscription, or you can call 1-800-XM-RADIO (1-800-967-2346). Once completed, the unit tunes in to one of the available channels (Channel 4 or higher). Once completed, JVC DLP tunes in to the preset channel, CH184. Continued on the next page EXTERNAL DEVICES 21