JVC AR780 Instruction Manual - Page 29
Storing your own sound modes, Adjusting the sound
UPC - 046838028366
View all JVC AR780 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
ENGLISH Adjusting the sound You can adjust the sound characteristics to your preference. • When appears on the display, you can move back to the previous display by pressing number button 3. 1 2 C VolAdjust, [-5 to +5] Turn the control dial to adjust the input level of each source (except FM). Adjust to match the input level of the FM sound level. • Before making an adjustment, select a source you want to adjust. D Loudness, [Off or On] Turn the control dial to select "Off" or "On." When "On" is selected, low and high frequencies sound are boosted to produce a well-balanced sound at low volume level. • For "EQ" setting, see the following. 4 Exit from the setting. 3 Adjust the selected setting item. A Fad/Bal (Fader/Balance) 1 Press number button 1 ( ) to move to the "Fad/Bal" adjustment display. 2 Adjust the speaker output balance by pressing: 5 / ∞: between the front and rear speakers. [F06 to R06] 4/¢ : between the left and right speakers. [L06 to R06] B Subwoofer 1 Press number button 1 ( ) to move to the "Subwoofer" adjustment display. 2 Use 4/¢ to select a cutoff frequency to the subwoofer. • 80Hz: Frequencies higher than 80 Hz are cut off. • 120Hz: Frequencies higher than 120 Hz are cut off. • 160Hz: Frequencies higher than 160 Hz are cut off. 3 Turn the control dial to adjust the subwoofer output level. [0 to 8] Storing your own sound modes You can adjust the sound modes and store your own adjustments in memory. • When appears on the display, you can move back to the previous display by pressing number button 3. 1 or Follow steps 1 and 2 on the left column. • In step 2, select "EQ." 2 Select a sound mode. To display the rest Continued on the next page SETTINGS 29