JVC DD-3 Instructions

JVC DD-3 - Sophisti Home Theater System Manual

Get JVC DD-3 - Sophisti Home Theater System PDF manuals and user guides
UPC - 046838029998
View all JVC DD-3 manuals
Add to My Manuals
Save this manual to your list of manuals

JVC DD-3 manual content summary:

  • JVC DD-3 | Instructions - Page 1
    çais NETWORK MEDIA SYSTEM SYSTÈME MÉDIA RÉSEAU DD-8 Consists of CA-DD8, SP-PWDD8, SP-DD8F and SP-DD8S Se compose de CA-DD8, SP-PWDD8, SP-DD8F et SP-DD8S DD-3 Consists of CA-DD3, SP-PWDD3, SP-DD3F and SP-DD8S Se compose de CA-DD3, SP-PWDD3, SP-DD3F et SP-DD8S INSTRUCTIONS MANUEL D'INSTRUCTIONS
  • JVC DD-3 | Instructions - Page 2
    accordance with the instructions, may cause not approved by JVC could void the user's authority to operate the equipment. For Canada/pour le Canada THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B LIMITS FOR RADIO NOISE EMISSIONS FROM DIGITAL APPARATUS AS SET
  • JVC DD-3 | Instructions - Page 3
    lighted candles, on the apparatus. • When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and/
  • JVC DD-3 | Instructions - Page 4
    position does not disconnect the mains line. • When the system is on standby, the STANDBY lamp lights red. • When the system is turned on, the STANDBY lamp goes off. The power can be remote controlled. ATTENTION - Touche F ! (CA-DD8/CA-DD3) Déconnectez la fiche secteur pour mettre l'appareil compl
  • JVC DD-3 | Instructions - Page 5
    power off completely (the POWER ON lamp goes off). When installing the apparatus, ensure that the plug is easily accessible. • When the system is turned on, the POWER transporté et installé par deux personnes. DD-8: 48.5 kg (106.9 lbs) DD-3: 22.7 kg (51 lbs) [European Union only] [Union europ
  • JVC DD-3 | Instructions - Page 6
    JVC product. Please read all instructions carefully devices........ 15 Connecting the power cable 15 Convenient functions of timer 18 Auto standby function 19 Locking disc ejection 19 Listening to radio broadcasts search 36 Changing the initial settings with the preference screen 37 Basic operations
  • JVC DD-3 | Instructions - Page 7
    Troubleshooting 53 Specifications 54 Main unit (CA-DD8/CA-DD3 54 Subwoofer for DD-8 (SP-PWDD8 54 Subwoofer for DD-3 (SP-PWDD3 55 Left and right speakers for DD-8 (SP-DD8F 55 Left and right speakers for DD button in this case. • Some diagrams in this manual are simplified or exaggerated for the
  • JVC DD-3 | Instructions - Page 8
    may be intermittent. While recording sound to another device, do not connect or disconnect headphones. Rear view *2 Refer to the separate volume of the operation manual for the network function. Display window 3
  • JVC DD-3 | Instructions - Page 9
    decreases, replace both batteries. ■ CAUTION • Do not expose batteries to heat or flame. Operating the system from the remote control Point the remote control directly at the front of the main unit. • Do main unit. * Refer to the separate volume of the operation manual for the network function. 4
  • JVC DD-3 | Instructions - Page 10
    Preparation English Preparation Do not turn on the power until you complete the connection. Connecting the antennas AM loop antenna (supplied) Setting up the AM loop antenna FM antenna (supplied) Main unit (rear view) FM antenna Stretch out the FM antenna horizontally. If insulation covers
  • JVC DD-3 | Instructions - Page 11
    to the speaker stands before the speakers can be connected to the subwoofer. Follow the diagrams below. Left and right speakers Center surround speaker ■ CAUTION • The left and right speakers for DD-8 are considerably heavy. Care must be taken in carrying and handling them. Injury to personnel
  • JVC DD-3 | Instructions - Page 12
    Preparation English Preparation (continued) Do not turn on the power until you complete the connection. Connecting the speakers to the subwoofer (DD-8) Before connecting the speaker cables, twist and pull off the insulation at the end of each speaker cable. Gray Rear view Subwoofer (SP-PWDD8)
  • JVC DD-3 | Instructions - Page 13
    assembled to the speaker stands before the speakers can be connected to the subwoofer. Follow the diagrams below. Left and right speakers ■ CAUTION • The left and right speakers and center surround speaker for DD-3 can be installed on a wall. • Be sure to have the speakers installed on the wall by
  • JVC DD-3 | Instructions - Page 14
    Preparation English Preparation (continued) Do not turn on the power until you complete the connection. Connecting the speakers to the subwoofer (DD-3) Before connecting the speaker cables, twist and pull off the insulation at the end of each speaker cable. Gray Rear view Subwoofer (SP-PWDD3)
  • JVC DD-3 | Instructions - Page 15
    exclusively for use with the supplied main unit as parts of the DD-8/DD-3 system. Do not connect the supplied speakers to devices other than the prevent color irregularity, set up the speakers following the instructions below. 1. Turn off the main power of the TV before setting up the speakers.
  • JVC DD-3 | Instructions - Page 16
    English Preparation (continued) Do not turn on the power until you complete the connection. Connecting a TV Connecting video cable (not supplied) Connecting a TV with the [HDMI] terminal This system can output uncompressed digital video signals to a TV compatible with HDMI (High Definition
  • JVC DD-3 | Instructions - Page 17
    Preparation English NOTE • This system supports up to HDMI version 1.0. The HDMI video signal type can be TV after connecting the main unit to the TV. 1 Turn on the main unit. (Refer to "Connecting the power cable" on page 15 and "Turning on the main unit" on page 16.) 2 Hold down [SCAN MODE] for
  • JVC DD-3 | Instructions - Page 18
    power , the video signal type can be selected as instructed below. - Select "480I" for a TV only JVC customer service center. • All JVC-manufactured progressive TVs and high-definition TVs are fully compatible with this system. • Even if the main unit is turned off, the video signal type setting
  • JVC DD-3 | Instructions - Page 19
    level may also be helpful for recording sound from the system to other devices. Audio cable (not supplied) To LINE IN 1] and [LINE IN 2] terminals are not output to the [LINE OUT] terminal. 1 Press [SETTING]. 2 Press 5 or / to select "LINEOUT" in the display window. 3 Press 2 or 3 to select
  • JVC DD-3 | Instructions - Page 20
    other digital audio devices Input AV amplifier with a built-in decoder To an optical digital input terminal Do not turn on the power until you complete the connection. Connecting other analog audio devices Output Audio device Optical digital cable (not supplied) Audio cable (not supplied
  • JVC DD-3 | Instructions - Page 21
    mode selector Press [F AUDIO]. • Press [F AUDIO] again to turn off the main unit. • With the power off, pressing any of the following buttons also turns on the main unit. - [DVD/CD 3], [USB 3], [NETWORK 3], [LINE], [FM/AM] or [OPEN/CLOSE 0] on the remote control - 3, 0 or [SOURCE] on the main
  • JVC DD-3 | Instructions - Page 22
    Press [+] or [-] to adjust the vol- ume. NOTE • Adjustable volume range is from -6 to +6. Adjusting the volume balance between the left and right speakers 1 Press [SETTING]. 2 Press 5 or / to display "BAL: " in the display window. 3 Press 2 or 3 to adjust the volume balance. • "CENTER" (the initial
  • JVC DD-3 | Instructions - Page 23
    press [SLEEP], the time indicated in the display window changes. You can set the time to 10, 20, 30, 60, 90, 120 or 150 minutes. Example : Display when the sleep timer is set to 60 minutes NOTE • When the sleep timer is activated, the display window
  • JVC DD-3 | Instructions - Page 24
    " indicator starts flashing. For the locations of the remote control buttons, refer to page 16. Locking disc ejection You can lock the disc tray to prevent the disc from being ejected. Setting the disc ejection lock ■When the main unit is turned off Press 0 while holding down 7 on the main unit
  • JVC DD-3 | Instructions - Page 25
    Listening to radio broadcasts English Listening to radio broadcasts Selecting a radio station Remote control mode selector 1 Press [FM/AM] to select "FM" or "AM" in the display window. • Each time you press [FM/AM], the band toggles between "FM" and "AM". • Repeatedly pressing [SOURCE] on the
  • JVC DD-3 | Instructions - Page 26
    radio station is stored. NOTE • When you store a radio station to a preset num- ber to which another radio station has previously been stored, the newly set radio station replaces the previously stored radio station. • You can also use 2 or 3 to select the preset number in step 3. 21
  • JVC DD-3 | Instructions - Page 27
    16 ″) disc, place it on the inner hollow of the disc tray. 3 Press [DVD/CD 3]. NOTE • Instead of step 3, you can use the buttons on the main unit 3 starts playback. • A menu screen may appear on the TV screen after DVD playback starts. In such a case, operate the menu screen, referring to "Selecting
  • JVC DD-3 | Instructions - Page 28
    "FILE TYPE" on page 38.) 1 Prepare the system for file playback by following the operations below. ■When class device connected to the [USB] terminal. 2 Press [DVD/CD 3] or [USB 3]. NOTE • You can also USB mass storage class device, refer also to its manual. • When using a USB cable for connecting
  • JVC DD-3 | Instructions - Page 29
    track number using the number buttons when the disc is stopped. - Specify the track number using 4 or ¢ when the disc is stopped, and then press [DVD/CD 3]. • Press [RETURN] to go back to the upper layer during PBC playback. ■When a disc is stopped Disc type Total number Total playback of tracks
  • JVC DD-3 | Instructions - Page 30
    window. File type Group File number number Messages on the TV screen When a DVD VIDEO is selected as the source, the messages shown below are displayed on when the region code of the disc does not match the code the main unit supports. (Refer to page 49.) NO DISC: Appears when no disc is loaded.
  • JVC DD-3 | Instructions - Page 31
    English Basic operations of disc/file playback Guide icons on the TV screen (on-screen guide) : Play : Pause : Fast reverse/fast forward search : Slow motion playback (reverse/ forward directions) : Containing multi-view angles (Refer to page 30.) : Containing multi-audio languages (
  • JVC DD-3 | Instructions - Page 32
    when the main unit is turned off by pressing [F AUDIO]. *2 This operation does not work for a CD. Starting playback from the stored position Press [DVD/CD 3] . NOTE • This function does not work in program playback or random playback. • You can deactivate the resume playback func- tion. (Refer to
  • JVC DD-3 | Instructions - Page 33
    page 22. Slow motion playback ■When a disc is paused Press [ SLOW] or [SLOW ]. • Each time you press [ SLOW] or [SLOW ], the speed increases. • Pressing [DVD/CD 3] cancels this function and starts normal playback. NOTE • No sound is produced. • The picture motion in the reverse direction may not be
  • JVC DD-3 | Instructions - Page 34
    English Basic operations of disc/file playback Basic operations of disc/file playback (continued) For the locations of the remote control buttons, refer to page 22. Selecting a chapter/track using the number buttons Selecting a track from the menu screen (PBC off) ■When a disc/file is played
  • JVC DD-3 | Instructions - Page 35
    • When a language code such as "AA" and "AB" is displayed, refer to "Language codes" on page 40. • You can also use the menu bar to set the functions. Refer to page 35. • "ST", "L" and "R" displayed when playing back a VCD or SVCD, respectively, indicate "Stereo", "Left sound" and "Right sound". 30
  • JVC DD-3 | Instructions - Page 36
    • You can erase the whole program at once by pressing 7. • Ejecting the disc or turning off the main unit also erases the program. 3 Press [DVD/CD 3]. Confirming the program ■When a disc/file is played back Press 7. • Playback stops and the program screen appears on the TV screen. Canceling program
  • JVC DD-3 | Instructions - Page 37
    is stopped 1 Press [PLAY MODE] repeatedly to display "RANDOM" in the display window. • Selecting an item other than "RANDOM" cancels random playback. 2 Press [DVD/CD 3]. NOTE • Each chapter or track is played back only once. • Ejecting the disc or turning off the main unit can- cels random playback
  • JVC DD-3 | Instructions - Page 38
    Cancels repeat. *1 Repeats the whole program during program playback. *2 "STEP" is displayed during program/random playback. NOTE • Repeat playback can also be set using the menu bar. (Refer to page 35.) • You can also specify a part to be played back repeatedly by using A-B repeat playback
  • JVC DD-3 | Instructions - Page 39
    a disc is played back or paused 1 Press [VFP]. • The current settings are displayed. TV screen (example) Selected VFP mode 2 Press 2 or 3 For normal playback. (You cannot adjust the image quality.) Go to step 7. - "CINEMA" Suitable for viewing a movie in a dim room. (You cannot adjust the image
  • JVC DD-3 | Instructions - Page 40
    menu bar, press [ON SCREEN]. Information displayed on the status bar DVD VIDEO Current title number Playback status* Sound signal type Time Current of the mark on the on-screen guide. (Refer to page 26.) Function list To select the settings for those items listed below without a description
  • JVC DD-3 | Instructions - Page 41
    [ 3 ], [ 4 ] and [ 5 ]. • You can skip entering the minute and second settings. • If the incorrect value is entered, press 2 to delete the values and enter values again. a CD, you can use this function any time. • Time search for a DVD VIDEO is from the begin- ning of the title. • Time search for a
  • JVC DD-3 | Instructions - Page 42
    VIDEO menu screen. Select the audio language for the DVD VIDEO. Select the subtitle language for the DVD VIDEO. Select the language displayed on the preference screen. NOTE • If the selected language is not recorded on the disc/file, the optimum language set for the disc/ file is displayed. • For
  • JVC DD-3 | Instructions - Page 43
    was last displayed. NOTE • This function does not work when this system outputs the video signal via the [HDMI] terminal. When files of JPEG files. VIDEO : For ASF/DivX/MPEG1/MPEG2 files. You can select the settings for the picture appearance (image quality, color intensity and black fading) on the
  • JVC DD-3 | Instructions - Page 44
    an HDMI cable. ? OTHERS Items Contents ( : initial setting) RESUME Select ON or OFF. (Refer to page 27.) ON SCREEN GUIDE Select ON or OFF. (Refer to page 26.) AV for copyright protection. NETWORK Refer to the separate volume of the oper- SETUP ation manual for the network function. 39
  • JVC DD-3 | Instructions - Page 45
    of DIGITAL AUDIO OUTPUT preference items and output signal Playback disc/file 48 kHz, 16/20/24 bits linear PCM DVD VIDEO 96 kHz linear PCM DVD VIDEO DTS DVD VIDEO DOLBY DIGITAL DVD VIDEO CD/VCD/SVCD DTS CD MP3/WMA/DivX file DIGITAL AUDIO OUTPUT preference STREAM/PCM DOLBY DIGITAL/PCM PCM
  • JVC DD-3 | Instructions - Page 46
    back sources from other devices 2 Start playback on the connected device. • Refer also to the operation manual for the connected device. 3 Adjust the volume and make other necessary settings. • Refer to "Basic operations" on page 16. Selecting other devices as the source 1 Press [LINE]. • Each
  • JVC DD-3 | Instructions - Page 47
    LINK). Activating QP LINK Press [QP LINK] repeatedly to select "QP ON" in the display window. • To deactivate QP LINK, select "QP OFF". • You can set QP LINK when the main unit is both on and off. *1 Using QP LINK ■When "QP ON" is selected 1 Connect a portable digital audio player to
  • JVC DD-3 | Instructions - Page 48
    this system. Operating a TV using the remote control Remote control mode selector Number buttons/ TV RETURN/ 100+ Setting the the one that operates the TV and the remote control properly. Manufacturer JVC Hitachi Magnavox Mitsubishi Panasonic Philips RCA Samsung Sanyo Sharp Sony Toshiba Zenith
  • JVC DD-3 | Instructions - Page 49
    some buttons may not work. Operating a VCR/DBS using the remote control Setting the manufacturer code 1 Slide the remote control mode selector to [VCR/ DBS operates the VCR and the remote control properly. Manufacturer JVC Emerson Fisher Funai Gold Star Hitachi Mitsubishi NEC Panasonic Philips
  • JVC DD-3 | Instructions - Page 50
    the manufacturer. • After replacing the batteries of the remote control, set the manufacturer code again. Using the remote control for the VCR/DBS Changes channels. Number buttons Selects the channels. (1-10, 0, 10) [DVD/CD 3] Starts playback. 7 Stops playback. 8 Pauses playback. ¡ Fast
  • JVC DD-3 | Instructions - Page 51
    -manufactured systems. • Refer to "OTHERS" on page 39 for determining the "AV COMPULINK MODE" setting. • Also refer to the manual of the TV to be connected to the main unit. JVC-manufactured TV Main unit (rear view) Operating the AV COMPU LINK function 1 Turn on the main power of the TV. 2 Play
  • JVC DD-3 | Instructions - Page 52
    the need for servicing and maintain the high quality of this system, do not trademarks of Digital Theater Systems, Inc. • home and DVD Format/Logo Licensing Corporation. • Official DivX® Certified product • Plays all versions of DivX® video (including DivX® 6) with standard playback of DivX® media
  • JVC DD-3 | Instructions - Page 53
    connected to the wall outlet. • When unplugging the power cord from the wall outlet, always pull on the plug, not the power cord. To prevent malfunctions of the system • There are no user-serviceable parts inside. If anything goes wrong, unplug the power cord and consult your dealer. • Do not insert
  • JVC DD-3 | Instructions - Page 54
    volume of the operation manual for the network function. • Even though listed above, some types may be unplayable. *1 Discs should be finalized before being played back. *2 For files recorded on a DVD-R/DVD-RW, the disc should be formatted with UDF Bridge. *3 This system may not recognize some
  • JVC DD-3 | Instructions - Page 55
    coder decoder of G.726. • For a WAV file, a disc with a sampling frequency of 44.1 kHz and a transmission rate of 16 bits is recommended. Notes on DVD-R/DVD-RW • This system does not support a disc recorded in multi-border format. • This system does not support a disc recorded in DVD VR format. 50
  • JVC DD-3 | Instructions - Page 56
    • The system does not support GMC (Global DVD side of a DualDisc on this product may not be recommended. Notes on files recorded on a connected USB mass storage class device • JVC bears no responsibility for any loss of data on the USB mass storage class device while using this system. • This system
  • JVC DD-3 | Instructions - Page 57
    Reference English Data hierarchy DVD VIDEO A DVD VIDEO consists of "titles" and each title may be divided into " folder. Folders can also include other folders, creating hierarchical folder layers. This system simplifies the hierarchical construction of files and manages folders by "groups". . Up
  • JVC DD-3 | Instructions - Page 58
    Troubleshooting Reference English Problem the "FILE TYPE" setting, perform either of the following after setting "FILE TYPE" to system does not work properly despite the above "Possible solution" Many functions of this system are controlled by microprocessors that can be reset by recycling the power
  • JVC DD-3 | Instructions - Page 59
    -23 dBm to -15 dBm • System terminal x 1 • Component video output Power consumption (on standby):0.5 W Dimensions (W x H x D):445 mm x 55 mm x 286.4 mm (17 9 16 ″ x 2 3 16 ″ x 11 5 16 ″) (including projecting parts) Weight: 3.5 kg (7.8 lbs) (CA-DD8) 3.0 kg (6.7 lbs) (CA-DD3) Subwoofer for DD
  • JVC DD-3 | Instructions - Page 60
    ″ x 14 5 16 ″) 12.3 kg (27.2 lbs) Left and right speakers for DD-8 (SP-DD8F) Type: 2-way 3-speaker bass reflex type Magnetically shielded type Speaker: 8 cm (3 3 16 ″) cone x 2 + 2 cm (13 16 ″) dome Power handling capacity:30 W Impedance: 3Ω Frequency range: 60 Hz - 40 kHz Sound pressure
  • JVC DD-3 | Instructions - Page 61
    16 ″) direct-drive Power handling capacity:30 W loop antenna x 1 • Left/right speaker cable x 2 • Center surround speaker cable x 1 • System DD-3) • Main volume of the operation manual [this man- ual] x 1 • Separate volume of the operation manual for the network function x 1 • CD-ROM for the network
  • JVC DD-3 | Instructions - Page 62
    For U.S.A.
  • JVC DD-3 | Instructions - Page 63
    For U.S.A.
  • JVC DD-3 | Instructions - Page 64
    EN, FR c 2006 Victor Company of Japan, Limited 1006SKMMODJEM
  • JVC DD-3 | Instructions - Page 65
    English Français DD-8 DD-3 This manual explains the network function of this system. Ce manuel explique les fonctions réseau de ce système. SEPARATE VOLUME INSTRUCTIONS FOR NETWORK FUNCTION REGISTRE SEPARÉ INSTRUCTIONS POUR LA FONCTION RÉSEAU LVT1547-001A [J]
  • JVC DD-3 | Instructions - Page 66
    of this system. LPCM, WAV, MP3, WMA, JPEG, ASF, DivX, MPEG1, MPEG2 NOTE • "DLNA" stands for "Digital Living Network Alliance". Refer to the following website for details. http://www.dlna.org/ CyberLink Media Server is a registered trademark along with other company and product names mentioned
  • JVC DD-3 | Instructions - Page 67
    network function 4 Preparation 5 Computer 5 Networking device 5 Connection Connection 6 Connecting the main unit to the router 6 Installing CyberLink Media Server Installing CyberLink Media Server 7 Installing CyberLink Media CyberLink Media Server 9 Setting up the IP address Setting up
  • JVC DD-3 | Instructions - Page 68
    Server from the bundled CD-ROM to your computer. CyberLink Media Server is a software application for sending video, audio and still picture files stored on your computer to the main unit. The network can be easily set up without having to manually configure the IP address of the main unit by simply
  • JVC DD-3 | Instructions - Page 69
    flow chart for the network function Set up the system following the flow chart shown below. The procedure for setting up the system differs depending on your usage environment. Connect the main unit to the router connected to your computer. Page 6 Install CyberLink Media Server to your computer
  • JVC DD-3 | Instructions - Page 70
    Preparation Set up your computer and network environment as follows. Computer You must install CyberLink Media Server from the bundled CD-ROM to your computer for playing back files stored on the computer with this system. System Requirements Operating system • Requirement: Microsoft Windows XP Home
  • JVC DD-3 | Instructions - Page 71
    , speakers and a TV referring to the main volume of the operation manual for this system. • To connect the main unit to the computer directly, refer to the Ethernet cable to the LAN terminal on the main unit. • The diagram shown above has been simplified by omitting the connection of the main unit,
  • JVC DD-3 | Instructions - Page 72
    close all anti-virus and other applications running on your computer before starting installation. • This manual explains operations with the English version of both Windows XP and CyberLink Media Server as examples. Follow the explanation referring to the actual operations of your language version
  • JVC DD-3 | Instructions - Page 73
    next to it and click [Apply]. • To go back to the previous screen Click [+] in the upper left portion of the screen. • To exit CyberLink Media Server Click [M] in the upper right portion of the screen. • Before deleting a shared folder or file on the connected computer, cancel folder/file sharing on
  • JVC DD-3 | Instructions - Page 74
    (On the computer) 2 Double-click the "CyberLink Media- Server" icon on the desktop. CyberLink Media Server starts. (On the remote control) 3 Press [NETWORK 3]. 4 Confirm that "CyberLink Media Server" is displayed on the TV screen. TV "CyberLink Media Server" Proceed to "Playing back files stored
  • JVC DD-3 | Instructions - Page 75
    is that the IP addresses may be assigned manually without using the DHCP function of the router. Possible solution: The IP address of the main unit must be set up manually. Click [Cancel] to close the display on the computer screen and exit CyberLink Media Server. Next, assign the IP address to the
  • JVC DD-3 | Instructions - Page 76
    setup for IP address Manual setup for IP address Example: 192. 168. 0. 4 Determining the IP address of the computer This part explains the procedure for determining the IP address of the computer by displaying the network setup. NOTE • Depending on the computer settings, you may need operations
  • JVC DD-3 | Instructions - Page 77
    Con- nections". NOTE • Depending on the computer settings, the "Control Panel" dialog box is displayed as shown below. 4 Right-click the "Local Area Con- nection" icon and then click [Properties]. In this case, double-click the "Network Connections" icon and then proceed to step 4. 3 Click
  • JVC DD-3 | Instructions - Page 78
    to the main unit This part explains the procedure for setting up the IP address of the main unit manually. You can skip this part when the main unit and address to the main unit, press [NETWORK 3] to select the connected computer as the source. "NETWORK SETUP" on the preference screen is disabled
  • JVC DD-3 | Instructions - Page 79
    up the IP address English 2 Press [SET UP] . The preference screen is displayed on the TV screen. 5 Select "OBTAIN IP" and then press [ 7 Press / to select "STATIC IP ADDRESS" and then press [ENTER]. 4 Press / to select "NETWORK SETUP" and then press [ENTER]. (Continued on the next page.) 14
  • JVC DD-3 | Instructions - Page 80
    finished setting up the IP address of the main unit. Return to page 8. NOTE • Usually, you do not have to set "DEFAULT GATEWAY". For normal usage, leave the initial setting unchanged. Set "DEFAULT GATEWAY" only when you want to play back files stored on a computer that belongs to another network
  • JVC DD-3 | Instructions - Page 81
    with almost the same procedure. (On the computer) 1 Start CyberLink Media Server. (On the remote control) 2 Press [NETWORK 3]. "CyberLink Media Server" is displayed. "CyberLink Media Server" 3 Press / to select "CyberLink Media Server". Selected item is highlighted. NOTE • Store files you want
  • JVC DD-3 | Instructions - Page 82
    English Playing back files stored on the computer 4 Press [ENTER]. The shared folders are displayed. Example: 7 Press 5 or / to select the file you want to play back. 5 Press / to select "My Music". 8 Press [ENTER]. Playback starts. 6 Press [ENTER]. The list of the audio files is displayed.
  • JVC DD-3 | Instructions - Page 83
    storing the desired folder in one of the default folders, and then 2) selecting the desired folder using CyberLink Media Server. NOTE • You can also access the desired folder from CyberLink Media Server by moving down from the local disk to the subdirectories. • This part explains the procedure for
  • JVC DD-3 | Instructions - Page 84
    the main unit to the computer directly. You must install CyberLink Media Server to your computer before connecting the main unit to the computer the computer as shown in the diagram below. Ethernet cable (straight-through cable or crossover cable, not supplied) 2 Set up the computer so that it
  • JVC DD-3 | Instructions - Page 85
    Troubleshooting Problem Media Server is Install CyberLink Media Server to the com- not installed. puter. 7 Incorrect IP addresses have been set manually frames may drop and sound may skip. Remove the - device from the network before playing back a file. A video, audio or The file type is
  • JVC DD-3 | Instructions - Page 86
    EN, FR c 2006 Victor Company of Japan, Limited 1106SKMMODJEM
  • JVC DD-3 | Instructions - Page 87
    NETWORK MEDIA SYSTEM DD-8 Consists of CA-DD8, SP-PWDD8, SP-DD8F and SP-DD8S DD-3 Consists of CA-DD3, SP-PWDD3, SP-DD3F and SP-DD8S DIGITAL MEDIA SYSTEM DD-1 Consists of CA-DD1, SP-PWDD1, SP-DD1F and SP-DD1S (Only for DD-8 and DD-3) INSTRUCTIONS LVT1546-009B [A, US, UB, UW, UX] English
  • JVC DD-3 | Instructions - Page 88
    apparatus. • When discarding batteries, environmental problems must be considered and local rules or are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. are shown below: Main unit (CA-DD8/CA-DD3/CA-DD1) Front view Side view Wall or obstructions
  • JVC DD-3 | Instructions - Page 89
    - F button! (CA-DD8/CA-DD3/CA-DD1) Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off). When installing the apparatus, ensure that the plug is easily accessible. The F button in any position does not disconnect the mains line. • When the system is on standby, the
  • JVC DD-3 | Instructions - Page 90
    JVC product. Please read all instructions carefully ........ 16 Connecting the power cable 16 Convenient functions sleep timer 19 Auto standby function 20 Locking disc ejection 20 Using the status bar 37 Listening to radio broadcasts ....21 Setting the AM tuner spacing 21 Selecting
  • JVC DD-3 | Instructions - Page 91
    the same as those on the remote control. You can use either button in this case. • This manual explains operations mainly with diagrams of the remote control supplied with DD-8/DD-3. If you are operating DD-1, please keep in mind the differences between your remote control shown on page 4. • Some
  • JVC DD-3 | Instructions - Page 92
    or disconnect headphones. Rear view *2 For DD-8/DD-3 users: Refer to the separate volume of the operation manual for the network function. For DD-1 users: The [LAN] terminal is not available. *3 For DD-8/DD-3 users: Refer to page 12. For DD-1 users: The [HDMI] terminal is not available. Display
  • JVC DD-3 | Instructions - Page 93
    DD-8/DD-3 and DD-1 in the locations of the remote control buttons as shown below. DD-8/DD-3 DD-1 *1 Refer to the separate Refer to page 19. volume of the operation manual for the network expose batteries to heat or flame. Operating the system from the remote control Point the remote control
  • JVC DD-3 | Instructions - Page 94
    Preparation Preparation Do not turn on the power until you complete the connection. Connecting the antennas AM loop antenna (supplied) Setting up the AM loop antenna FM antenna (supplied) Main unit (rear view) FM antenna Stretch out the FM antenna horizontally. If insulation covers the tips
  • JVC DD-3 | Instructions - Page 95
    to the speaker stands before the speakers can be connected to the subwoofer. Follow the diagrams below. Left and right speakers Center surround speaker ■ CAUTION • The left and right speakers for DD-8 are considerably heavy. Care must be taken in carrying and handling them. Injury to personnel
  • JVC DD-3 | Instructions - Page 96
    Preparation Preparation (continued) Do not turn on the power until you complete the connection. Connecting the speakers to the subwoofer (DD-8) Before connecting the speaker cables, twist and pull off the insulation at the end of each speaker cable. Gray Rear view Subwoofer (SP-PWDD8) Black
  • JVC DD-3 | Instructions - Page 97
    assembled to the speaker stands before the speakers can be connected to the subwoofer. Follow the diagrams below. Left and right speakers ■ CAUTION • The left and right speakers and center surround speaker for DD-3 can be installed on a wall. • Be sure to have the speakers installed on the wall by
  • JVC DD-3 | Instructions - Page 98
    Preparation Preparation (continued) Do not turn on the power until you complete the connection. Connecting the speakers to the subwoofer (DD-3) Before connecting the speaker cables, twist and pull off the insulation at the end of each speaker cable. Gray Rear view Subwoofer (SP-PWDD3) Black
  • JVC DD-3 | Instructions - Page 99
    Preparation Connecting the speakers to the subwoofer (DD-1) Before connecting the speaker cables, twist and pull off the insulation at the end of each speaker cable. Black lines Gray Rear view Subwoofer (SP-
  • JVC DD-3 | Instructions - Page 100
    exclusively for use with the supplied main unit as parts of the DD-8/DD-3/DD-1 system. Do not connect the supplied speakers to devices other than the prevent color irregularity, set up the speakers following the instructions below. 1. Turn off the main power of the TV before setting up the speakers.
  • JVC DD-3 | Instructions - Page 101
    (rear view) To an S-video terminal Component video cable (not supplied) Connecting a TV with the [HDMI] terminal (not available for DD-1) DD-8 and DD-3 can output uncompressed digital video signals to a TV compatible with HDMI (High Definition Multimedia Interface). TV Main unit (rear view) To
  • JVC DD-3 | Instructions - Page 102
    (continued) Do not turn on the power until you complete the connection. NOTE • DD-8 and DD-3 support up to HDMI version 1.0. The HDMI video the main unit to the TV. 1 Turn on the main unit. (Refer to "Connecting the power cable" on page 16 and "Turning on the main unit" on page 17.) 2 Hold down
  • JVC DD-3 | Instructions - Page 103
    instructed below. (Only for DD-8 and DD-3) - Select "AUTO" for normal usage (the initial setting).* JVC customer service center. • All JVC-manufactured progressive TVs and high-definition TVs are fully compatible with this system. • Even if the main unit is turned off, the video signal type setting
  • JVC DD-3 | Instructions - Page 104
    not turn on the power until you complete the be helpful for recording sound from the system to other devices. Audio cable (not 1] and [LINE IN 2] terminals are not output to the [LINE OUT] terminal. 1 Press [SETTING]. 2 Press 5 or / to select "LINEOUT" in the display window. 3 Press 2 or
  • JVC DD-3 | Instructions - Page 105
    unit AC outlet Main unit (rear view) ■ Subwoofer Subwoofer (rear view) AC outlet ■ CAUTION • Do not connect the power cable of the sub- woofer to an AC outlet before setting the voltage selector on the subwoofer and completing all connections. Refer to page 11. (Only for countries/areas other
  • JVC DD-3 | Instructions - Page 106
    Press [F AUDIO]. • Press [F AUDIO] again to turn off the main unit. • With the power off, pressing any of the following buttons also turns on the main unit. - [DVD/CD 3], [USB 3], [NETWORK 3] (only for DD-8/DD-3), [LINE], [FM/AM] or [OPEN/ CLOSE 0] on the remote control - 3, 0 or [SOURCE] on
  • JVC DD-3 | Instructions - Page 107
    Press [+] or [-] to adjust the vol- ume. NOTE • Adjustable volume range is from -6 to +6. Adjusting the volume balance between the left and right speakers 1 Press [SETTING]. 2 Press 5 or / to display "BAL: " in the display window. 3 Press 2 or 3 to adjust the volume balance. • "CENTER" (the initial
  • JVC DD-3 | Instructions - Page 108
    press [SLEEP], the time indicated in the display window changes. You can set the time to 10, 20, 30, 60, 90, 120 or 150 minutes. Example : Display when the sleep timer is set to 60 minutes NOTE • When the sleep timer is activated, the display window
  • JVC DD-3 | Instructions - Page 109
    " indicator starts flashing. For the locations of the remote control buttons, refer to page 17. Locking disc ejection You can lock the disc tray to prevent the disc from being ejected. Setting the disc ejection lock ■When the main unit is turned off Press 0 while holding down 7 on the main unit
  • JVC DD-3 | Instructions - Page 110
    Listening to radio broadcasts Listening to radio broadcasts Setting the AM tuner spacing AM stations are spaced 9 while holding down [VOLUME +] on the main unit, press F on the main unit to turn on the power. "AM 10 kHz STEP" appears in the display window. NOTE • When the spacing is switched, the
  • JVC DD-3 | Instructions - Page 111
    station is stored. NOTE • When you store a radio station to a preset num- ber to which another radio station has previously been stored, the newly set radio station replaces the previously stored radio station. • You can also use 2 or 3 to select the preset number in step 3. Tuning in to a preset
  • JVC DD-3 | Instructions - Page 112
    cm disc, place it on the inner hollow of the disc tray. 3 Press [DVD/CD 3]. NOTE • Instead of step 3, you can use the buttons on the main pressing 3 starts playback. • A menu screen may appear on the TV screen after DVD playback starts. In such a case, operate the menu screen, referring to "Selecting
  • JVC DD-3 | Instructions - Page 113
    "FILE TYPE" on page 39.) 1 Prepare the system for file playback by following the operations below. ■When class device connected to the [USB] terminal. 2 Press [DVD/CD 3] or [USB 3]. NOTE • You can also USB mass storage class device, refer also to its manual. • When using a USB cable for connecting
  • JVC DD-3 | Instructions - Page 114
    track number using the number buttons when the disc is stopped. - Specify the track number using 4 or ¢ when the disc is stopped, and then press [DVD/CD 3]. • Press [RETURN] to go back to the upper layer during PBC playback. ■When a disc is stopped Disc type Total number Total playback of tracks
  • JVC DD-3 | Instructions - Page 115
    window. File type Group File number number Messages on the TV screen When a DVD VIDEO is selected as the source, the messages shown below are displayed on when the region code of the disc does not match the code the main unit supports. (Refer to page 49.) NO DISC: Appears when no disc is loaded.
  • JVC DD-3 | Instructions - Page 116
    Basic operations of disc/file playback Basic operations of disc/file playback (continued) Guide icons on the TV screen (on-screen guide) : Play : Pause : Fast reverse/fast forward search : Slow motion playback (reverse/ forward directions) : Containing multi-view angles (Refer to page 31.) :
  • JVC DD-3 | Instructions - Page 117
    when the main unit is turned off by pressing [F AUDIO]. *2 This operation does not work for a CD. Starting playback from the stored position Press [DVD/CD 3] . NOTE • This function does not work in program playback or random playback. • You can deactivate the resume playback func- tion. (Refer to
  • JVC DD-3 | Instructions - Page 118
    title. Slow motion playback ■When a disc is paused Press [ SLOW] or [SLOW ]. • Each time you press [ SLOW] or [SLOW ], the speed increases. • Pressing [DVD/CD 3] cancels this function and starts normal playback. NOTE • No sound is produced. • The picture motion in the reverse direction may not be
  • JVC DD-3 | Instructions - Page 119
    Basic operations of disc/file playback Selecting a chapter/track using the number buttons For the locations of the remote control buttons, refer to page 23. Selecting a track from the menu screen (PBC off) ■When a disc/file is played back Press the number buttons to select the chapter number or
  • JVC DD-3 | Instructions - Page 120
    • When a language code such as "AA" and "AB" is displayed, refer to "Language codes" on page 41. • You can also use the menu bar to set the functions. Refer to page 36. • "ST", "L" and "R" displayed when playing back a VCD or SVCD, respectively, indicate "Stereo", "Left sound" and "Right sound". 31
  • JVC DD-3 | Instructions - Page 121
    • You can erase the whole program at once by pressing 7. • Ejecting the disc or turning off the main unit also erases the program. 3 Press [DVD/CD 3]. Confirming the program ■When a disc/file is played back Press 7. • Playback stops and the program screen appears on the TV screen. Canceling program
  • JVC DD-3 | Instructions - Page 122
    is stopped 1 Press [PLAY MODE] repeatedly to display "RANDOM" in the display window. • Selecting an item other than "RANDOM" cancels random playback. 2 Press [DVD/CD 3]. NOTE • Each chapter or track is played back only once. • Ejecting the disc or turning off the main unit can- cels random playback
  • JVC DD-3 | Instructions - Page 123
    Cancels repeat. *1 Repeats the whole program during program playback. *2 "STEP" is displayed during program/random playback. NOTE • Repeat playback can also be set using the menu bar. (Refer to page 36.) • You can also specify a part to be played back repeatedly by using A-B repeat playback
  • JVC DD-3 | Instructions - Page 124
    ■When a disc is played back or paused 1 Press [VFP]. • The current settings are displayed. TV screen (example) Selected VFP mode 2 Press 2 or 3 to normal playback. (You cannot adjust the image quality.) Go to step 7. - "CINEMA" Suitable for viewing a movie in a dim room. (You cannot adjust the image
  • JVC DD-3 | Instructions - Page 125
    menu bar, press [ON SCREEN]. Information displayed on the status bar DVD VIDEO Current title number Playback status* Sound signal type Time Current chapter meaning of the mark on the on-screen guide. (Refer to page 27.) Function list To select the settings for those items listed below without a
  • JVC DD-3 | Instructions - Page 126
    [ 3 ], [ 4 ] and [ 5 ]. • You can skip entering the minute and second settings. • If the incorrect value is entered, press 2 to delete the values and enter values again. a CD, you can use this function any time. • Time search for a DVD VIDEO is from the begin- ning of the title. • Time search for a
  • JVC DD-3 | Instructions - Page 127
    VIDEO menu screen. Select the audio language for the DVD VIDEO. Select the subtitle language for the DVD VIDEO. Select the language displayed on the preference screen. NOTE • If the selected language is not recorded on the disc/file, the optimum language set for the disc/ file is displayed. • For
  • JVC DD-3 | Instructions - Page 128
    was last displayed. NOTE • This function does not work when this system outputs the video signal via the [HDMI] terminal. When files of JPEG files. VIDEO : For ASF/DivX/MPEG1/MPEG2 files. You can select the settings for the picture appearance (image quality, color intensity and black fading) on the
  • JVC DD-3 | Instructions - Page 129
    . ? OTHERS Items Contents ( : initial setting) RESUME Select ON or OFF. (Refer to page 28.) ON SCREEN GUIDE Select ON or OFF. (Refer to page protection. NETWORK SETUP For DD-8/DD-3 users: Refer to the separate volume of the operation manual for the network function. For DD-1 users: This
  • JVC DD-3 | Instructions - Page 130
    playback Changing the initial settings with the preference screen (continued) List of relationships of DIGITAL AUDIO OUTPUT preference items and output signal Playback disc/file 48 kHz, 16/20/24 bits linear PCM DVD VIDEO 96 kHz linear PCM DVD VIDEO DTS DVD VIDEO DOLBY DIGITAL DVD VIDEO CD/VCD
  • JVC DD-3 | Instructions - Page 131
    back sources from other devices 2 Start playback on the connected device. • Refer also to the operation manual for the connected device. 3 Adjust the volume and make other necessary settings. • Refer to "Basic operations" on page 17. Selecting other devices as the source 1 Press [LINE]. • Each
  • JVC DD-3 | Instructions - Page 132
    produced. Activating QP LINK Press [QP LINK] repeatedly to select "QP ON" in the display window. • To deactivate QP LINK, select "QP OFF". • You can set QP LINK when the main unit is both on and off. *1 Using QP LINK ■When "QP ON" is selected 1 Connect a portable digital audio player to
  • JVC DD-3 | Instructions - Page 133
    this system. Operating a TV using the remote control Remote control mode selector Number buttons/ TV RETURN/ 100+ Setting the the one that operates the TV and the remote control properly. Manufacturer JVC Hitachi Magnavox Mitsubishi Panasonic Philips RCA Samsung Sanyo Sharp Sony Toshiba Zenith
  • JVC DD-3 | Instructions - Page 134
    some buttons may not work. Operating a VCR/DBS using the remote control Setting the manufacturer code 1 Slide the remote control mode selector to [VCR/ that operates the VCR and the remote control properly. Manufacturer JVC Emerson Fisher Funai Gold Star Hitachi Mitsubishi NEC Panasonic Philips
  • JVC DD-3 | Instructions - Page 135
    the manufacturer. • After replacing the batteries of the remote control, set the manufacturer code again. For the locations of the remote control Changes channels. Number buttons Selects the channels. (1-10, 0, 10) [DVD/CD 3] Starts playback. 7 Stops playback. 8 Pauses playback. ¡
  • JVC DD-3 | Instructions - Page 136
    the need for servicing and maintain the high quality of this system, do not trademarks of Digital Theater Systems, Inc. • home and DVD Format/Logo Licensing Corporation. • Official DivX® Certified product • Plays all versions of DivX® video (including DivX® 6) with standard playback of DivX® media
  • JVC DD-3 | Instructions - Page 137
    connected to the wall outlet. • When unplugging the power cord from the wall outlet, always pull on the plug, not the power cord. To prevent malfunctions of the system • There are no user-serviceable parts inside. If anything goes wrong, unplug the power cord and consult your dealer. • Do not insert
  • JVC DD-3 | Instructions - Page 138
    DD-8 and DD-3) DVD VIDEO, VCD, SVCD, CD, CD-R, CD-RW, DVD-R, DVD-RW, +R, +RW MP3, WMA, WAV, JPEG, ASF, DivX, MPEG1, MPEG2 Refer to the separate volume of the operation manual for the network -G CD-EXTRA CD TEXT This system accommodates the NTSC and PAL systems. For the Middle Eastern countries
  • JVC DD-3 | Instructions - Page 139
    of G.726. • For a WAV file, a disc with a sampling frequency of 44.1 kHz and a transmission rate of 16 bits is recommended. Notes on DVD-R/DVD-RW • This system does not support a disc recorded in multi-border format. • This system does not support a disc recorded in DVD VR format. 50 Reference
  • JVC DD-3 | Instructions - Page 140
    • The system does not support GMC (Global DVD side of a DualDisc on this product may not be recommended. Notes on files recorded on a connected USB mass storage class device • JVC bears no responsibility for any loss of data on the USB mass storage class device while using this system. • This system
  • JVC DD-3 | Instructions - Page 141
    Reference Data hierarchy DVD VIDEO A DVD VIDEO consists of "titles" and each title may be divided into "chapters folder. Folders can also include other folders, creating hierarchical folder layers. This system simplifies the hierarchical construction of files and manages folders by "groups". . Up
  • JVC DD-3 | Instructions - Page 142
    Troubleshooting Reference Problem (Only for DD-8/ DD-3) The main " setting, perform either of the following after setting " system does not work properly despite the above "Possible solution" Many functions of this system are controlled by microprocessors that can be reset by recycling the power
  • JVC DD-3 | Instructions - Page 143
    x 1 (not available for DD-1) USB Compatible with USB 2.0 Full-Speed Compatible device: Mass storage class device Compatible file system: FAT16, FAT32 Bus power supply: Max. 500 mA General Power source (Australia): AC 240 V Power source (Hong Kong):AC 220 V Power source (other countries/areas): AC
  • JVC DD-3 | Instructions - Page 144
    221 mm x 361 mm x 340 mm • Weight: 11.0 kg Left and right speakers for DD-8 (SP-DD8F) Type: 2-way 3-speaker bass reflex type Magnetically shielded type Speaker: 8 cm cone x 2 + 2 cm dome Power handling capacity:30 W Impedance: 3Ω Frequency range: 60 Hz - 40 kHz Sound pressure level: 81
  • JVC DD-3 | Instructions - Page 145
    volume of the operation manual [this manual] x 1 • Separate volume of the operation manual for the network function x 1 (Only for DD-8 and DD-3) • CD-ROM for the network function setup x 1 (Only for DD-8 and DD-3) [This CD-ROM is for use on a computer. It cannot be played back on this system.] 56
  • JVC DD-3 | Instructions - Page 146
    Mains (AC) Line Instruction (Only for countries/areas other than Australia or Hong Kong) Subwoofer (rear view) CAUTION for mains (AC) line BEFORE PLUGGING IN, do check that your
  • JVC DD-3 | Instructions - Page 147
    English DD-8 DD-3 This manual explains the network function of this system. SEPARATE VOLUME INSTRUCTIONS FOR NETWORK FUNCTION LVT1547-009C [A, US, UB, UW, UX, UJ]
  • JVC DD-3 | Instructions - Page 148
    of this system. LPCM, WAV, MP3, WMA, JPEG, ASF, DivX, MPEG1, MPEG2 NOTE • "DLNA" stands for "Digital Living Network Alliance". Refer to the following website for details. http://www.dlna.org/ CyberLink Media Server is a registered trademark along with other company and product names mentioned
  • JVC DD-3 | Instructions - Page 149
    network function 4 Preparation 5 Computer 5 Networking device 5 Connection Connection 6 Connecting the main unit to the router 6 Installing CyberLink Media Server Installing CyberLink Media Server 7 Installing CyberLink Media CyberLink Media Server 9 Setting up the IP address Setting up
  • JVC DD-3 | Instructions - Page 150
    Server from the bundled CD-ROM to your computer. CyberLink Media Server is a software application for sending video, audio and still picture files stored on your computer to the main unit. The network can be easily set up without having to manually configure the IP address of the main unit by simply
  • JVC DD-3 | Instructions - Page 151
    flow chart for the network function Set up the system following the flow chart shown below. The procedure for setting up the system differs depending on your usage environment. Connect the main unit to the router connected to your computer. Page 6 Install CyberLink Media Server to your computer
  • JVC DD-3 | Instructions - Page 152
    Preparation Set up your computer and network environment as follows. Computer You must install CyberLink Media Server from the bundled CD-ROM to your computer for playing back files stored on the computer with this system. System Requirements Operating system • Requirement: Microsoft Windows XP Home
  • JVC DD-3 | Instructions - Page 153
    , speakers and a TV referring to the main volume of the operation manual for this system. • To connect the main unit to the computer directly, refer to the Ethernet cable to the LAN terminal on the main unit. • The diagram shown above has been simplified by omitting the connection of the main unit,
  • JVC DD-3 | Instructions - Page 154
    close all anti-virus and other applications running on your computer before starting installation. • This manual explains operations with the English version of both Windows XP and CyberLink Media Server as examples. Follow the explanation referring to the actual operations of your language version
  • JVC DD-3 | Instructions - Page 155
    next to it and click [Apply]. • To go back to the previous screen Click [+] in the upper left portion of the screen. • To exit CyberLink Media Server Click [M] in the upper right portion of the screen. • Before deleting a shared folder or file on the connected computer, cancel folder/file sharing on
  • JVC DD-3 | Instructions - Page 156
    (On the computer) 2 Double-click the "CyberLink Media- Server" icon on the desktop. CyberLink Media Server starts. (On the remote control) 3 Press [NETWORK 3]. 4 Confirm that "CyberLink Media Server" is displayed on the TV screen. TV "CyberLink Media Server" Proceed to "Playing back files stored
  • JVC DD-3 | Instructions - Page 157
    is that the IP addresses may be assigned manually without using the DHCP function of the router. Possible solution: The IP address of the main unit must be set up manually. Click [Cancel] to close the display on the computer screen and exit CyberLink Media Server. Next, assign the IP address to the
  • JVC DD-3 | Instructions - Page 158
    setup for IP address Manual setup for IP address Example: 192. 168. 0. 4 Determining the IP address of the computer This part explains the procedure for determining the IP address of the computer by displaying the network setup. NOTE • Depending on the computer settings, you may need operations
  • JVC DD-3 | Instructions - Page 159
    Con- nections". NOTE • Depending on the computer settings, the "Control Panel" dialog box is displayed as shown below. 4 Right-click the "Local Area Con- nection" icon and then click [Properties]. In this case, double-click the "Network Connections" icon and then proceed to step 4. 3 Click
  • JVC DD-3 | Instructions - Page 160
    to the main unit This part explains the procedure for setting up the IP address of the main unit manually. You can skip this part when the main unit and address to the main unit, press [NETWORK 3] to select the connected computer as the source. "NETWORK SETUP" on the preference screen is disabled
  • JVC DD-3 | Instructions - Page 161
    up the IP address 2 Press [SET UP] . The preference screen is displayed on the TV screen. 5 Select "OBTAIN IP" and then press [ENTER]. ". 7 Press / to select "STATIC IP ADDRESS" and then press [ENTER]. 4 Press / to select "NETWORK SETUP" and then press [ENTER]. (Continued on the next page.) 14
  • JVC DD-3 | Instructions - Page 162
    finished setting up the IP address of the main unit. Return to page 8. NOTE • Usually, you do not have to set "DEFAULT GATEWAY". For normal usage, leave the initial setting unchanged. Set "DEFAULT GATEWAY" only when you want to play back files stored on a computer that belongs to another network
  • JVC DD-3 | Instructions - Page 163
    with almost the same procedure. (On the computer) 1 Start CyberLink Media Server. (On the remote control) 2 Press [NETWORK 3]. "CyberLink Media Server" is displayed. "CyberLink Media Server" 3 Press / to select "CyberLink Media Server". Selected item is highlighted. NOTE • Store files you want
  • JVC DD-3 | Instructions - Page 164
    Playing back files stored on the computer 4 Press [ENTER]. The shared folders are displayed. Example: 7 Press 5 or / to select the file you want to play back. 5 Press / to select "My Music". 8 Press [ENTER]. Playback starts. 6 Press [ENTER]. The list of the audio files is displayed. NOTE • If
  • JVC DD-3 | Instructions - Page 165
    storing the desired folder in one of the default folders, and then 2) selecting the desired folder using CyberLink Media Server. NOTE • You can also access the desired folder from CyberLink Media Server by moving down from the local disk to the subdirectories. • This part explains the procedure for
  • JVC DD-3 | Instructions - Page 166
    the main unit to the computer directly. You must install CyberLink Media Server to your computer before connecting the main unit to the computer the computer as shown in the diagram below. Ethernet cable (straight-through cable or crossover cable, not supplied) 2 Set up the computer so that it
  • JVC DD-3 | Instructions - Page 167
    Troubleshooting Problem Media Server is Install CyberLink Media Server to the com- not installed. puter. 7 Incorrect IP addresses have been set manually frames may drop and sound may skip. Remove the - device from the network before playing back a file. A video, audio or The file type is
  • JVC DD-3 | Instructions - Page 168
    EN c 2006 Victor Company of Japan, Limited 1106SKMMODJEM
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
English
Français
NETWORK MEDIA SYSTEM
SYSTÈME MÉDIA RÉSEAU
INSTRUCTIONS
MANUEL D’INSTRUCTIONS
For Customer Use:
Enter below the Model No. and Serial
No. which are located either on the rear,
bottom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT1546-001A
[J]
DD-8
Consists of CA-DD8, SP-PWDD8,
SP-DD8F and SP-DD8S
Se compose de CA-DD8, SP-PWDD8,
SP-DD8F et SP-DD8S
DD-3
Consists of CA-DD3, SP-PWDD3,
SP-DD3F and SP-DD8S
Se compose de CA-DD3, SP-PWDD3,
SP-DD3F et SP-DD8S