JVC DD-3 Instructions - Page 46
Playing back sources from other devices
UPC - 046838029998
View all JVC DD-3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
English Playing back sources from other devices Playing back sources from other devices 2 Start playback on the connected device. • Refer also to the operation manual for the connected device. 3 Adjust the volume and make other necessary settings. • Refer to "Basic operations" on page 16. Selecting other devices as the source 1 Press [LINE]. • Each time you press [LINE], the display changes in the display window as follows. - "LINE 1" for selecting the device connected to the [LINE IN 1] terminal - "LINE 2" for selecting the device connected to the [LINE IN 2] terminals - "LINE-DIGITAL" for selecting the digital audio device connected to the [LINE-DIGITAL IN] terminal • You can also select the connected device as the source by repeatedly pressing [SOURCE] on the main unit. Selecting the signal gain You can select the gain of the signal from the [LINE IN 1] and [LINE IN 2] terminals. Use the initial settings for normal operation. If the sound is too small or too loud, change the settings. 1 Press [LINE] repeatedly to select "LINE 1" or "LINE 2" in the display window. 2 Hold down [ENTER]. • Each time you hold down [ENTER], the display changes as follows. "LEVEL 1" : the initial setting for "LINE 2" "LEVEL 2" "LEVEL 3" : the initial setting for "LINE 1" • The signal gain increases in the order of "LEVEL 1", "LEVEL 2" and "LEVEL 3". NOTE • You can select the signal gain respectively for "LINE 1" and "LINE 2". 41