JVC DF450 Instructions - Page 24

24 EN VIDEO PLAYBACK NOTES: ● It is recommended to use the AC Adapter as the power supply instead of the battery pack. (੬ pg. 15) ● To monitor the picture and sound from the camcorder without inserting a tape or memory card*, set the camcorder's Power Switch to "A" or "M", then set your TV to the appropriate input mode. * GR-DF470/450 only ● Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on. Playback Using The Remote Control Beam Effective Area (indoor use) When using the remote control, be sure to point it at the remote sensor. The transmitted beam's approximate effective distance for indoor use is 5 m (16 ft). Remote sensor NOTE: The transmitted beam may not be effective or may cause incorrect operation when the remote sensor is directly exposed to sunlight or powerful lighting. Buttons And Functions The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. It also makes additional playback functions possible. (੬ pg. 25) Installing The Battery The remote control uses one lithium battery 2 (CR2025). 1 Pull out the battery 1 holder by pushing the lock tab. 3 1 2 Insert the battery in the Lock tab holder, and be sure to have the "+" mark visible. 3 Slide the holder back in until you hear a click. A Infrared beam transmitting window ● Transmits the beam signal. The following buttons are available only when the camcorder's Power Switch is set to "PLAY". B PAUSE Button ● Pauses the tape (੬ pg. 25) Up Button (੬ pg. 26) C SLOW Rewind Button (੬ pg. 25) D REW Button ● Rewind/Reverse Shuttle Search on a tape (੬ pg. 22) ● Displays previous file in a memory card* (੬ pg. 29) Left Button (੬ pg. 26)