JVC DLA-HD10KU DLA-HD10K Owner's Manual (50 pages) - Page 32
Options Menu, Information Menu, Menu Display, Sleep Time, RC232C bps, Zoom/Focus, Power Save, Source
View all JVC DLA-HD10KU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Adjustments and Settings Using Menus (continued) C Options Menu Menu Display Adjusts the display duration of the menu screen. Setting Values: A15secB,AOnB Default Value: A15secB ● The menu screen display will not disappear automatically when this is set to AOnB. Press the [EXIT] button to clear the menu screen. Sleep Time Sets the lapse time before automatically switching the unit to the standby mode when there is no signal input. Setting Values: A15minB,A30minB,A60minB,AOffB Default Value: AOffB RC232C (bps) Sets the communication speed (signal transmission speed) when communicating with a computer using the RS-232C terminal. Ensure that this is same as the rate set at the computer. Setting Values: A9600B,A19200B Default Value: A19200B Zoom/Focus Locks/Unlocks the power zoom/power focus functions of the projection lens. Setting Values: ALockB,AUnlockB Default Value: AUnlockB Power Save Switches the power (brightness) of the light-source lamp. Setting Values: AOnB,AOffB Default Value: AOffB D Information Menu Lamp Time Displays the accumulated hours of usage of the lightsource lamp. Source Automatically identifies the input video signal at the [DVI] terminal of this unit and displays the signal name (A1080p50B or A1080p60B). ● When there is no video signal input to the [DVI] terminal, or when there is input of a video signal that cannot be used with this unit, no signal name will be displayed. NOTES: ● When the input video signal is switched, a blue back image will appear for about 2 seconds. ● When nothing is connected to the [DVI] terminal, or if there is no video signal, a ANo Signal DVI-DB message will be projected. ● For a video signal that cannot be used with this unit, a AOut of RangeB message will be projected. ● Video input signals that can be used with this unit are 1080/50p and 1080/60p signals by DVI-D. ● It is possible to lower the power (brightness) of the lightsource lamp when this is set to AOnB, but the display will appear darker than when this is set to AOffB. ● Adjustment of settings will be disabled for about 1 minute after the setting is changed. In this case, adjust settings after a lapse of at least 1 minute. ● Altering the AOnB,AOffB setting does not affect the lamp usage time (lamp life) of the light-source lamp. 32