JVC DT-3D24G1U 22 page technical guide on the DT-3D24G1 24-inch 3-D Monitor - Page 8

CAMERA-ASSIST MENU: DUAL TIME CODE AND SCOPE BUTTON/LAMP Methods to check the alignment of both cameras vary but the DT-3D24G1 has many convenient features that enable users to answer any requirement. Dual Time Code  Features: Dual Display Mode and 3D Display Mode are useful for checking the time codes of left and right input signals.  Advantages: Time codes of both left and right signals are shown in Dual Display Mode, whereas only the left signal time code is displayed in 3D Display mode.  Benefit: Dual Display Mode makes it easy to check the time code of both input signals. Dual Display Mode: Displays time codes for left and right signals as well as the time gap between the two signals. 3D Display Mode Displays TC1 (left signal time code) Scope Button/Lamp  Features: The two built-in oscilloscopic wave signals of Waveform (W.F.M.) and Vectorscope (V.S.) can be displayed.  Advantages: Parallel Wave Form, Parallel Vector Scope, Difference Wave Form, and Difference Vector Scope displays are available. The SCOPE button can also be used to select a monitor mode, which cycles through these modes.  Benefit: A separate scope monitor is not required. Parallel Wave Form: Displays the two signal forms side by side. Difference Wave Form: Displays the differential between the two signals in wave form. Parallel Vectorscope: Displays the two signal scopes side by side. Difference Vectorscope: Displays the differential between the two signals in vectorscope. 8