JVC DT-E17L4G Operation manual for DT-E17L4/DT-E21L4G Monitor (32 pages) - Page 30

Specifications (cont.) Computer signals (preset) Analog RGB input (COMP./RGB terminals) and DVI input (HDMI terminal): No. Signal name 1 VGA60 2 WVGA60 3 SVGA60 4 XGA60 5 WXGA (1280) 6 WXGA+60 7 SXGA60 8 UXGA60 *1 9 WUXGA60 *1 10 1080/60p 11 1080/50p 12 US TEXT *2, *5 13 WXGA(1360) 14 SXGA+/60A *3 15 SXGA+/60B *4 16 MAC13 *5 17 MAC16 *5 18 MAC19 *5 19 MAC21 *5 Resolution Horizontal Vertical 640 480 852 480 800 600 1024 768 1280 768 1440 900 1280 1024 1600 1200 1920 1200 1920 1080 1920 1080 720 400 1360 768 1400 1050 1400 1050 640 480 832 624 1024 768 1152 870 Frequency Horizontal (kHz) Vertical (Hz) 31.5 59.9 31.5 59.9 37.9 60.3 48.4 60.0 47.8 60.0 55.9 60.0 64.0 60.0 75.0 60.0 74.0 60.0 67.5 60.0 56.3 50.0 31.5 70.1 47.7 60.0 64.0 60.0 65.2 60.0 35.0 66.7 49.7 74.5 60.2 74.9 68.7 75.1 Scan system Non-interlace Non-interlace Non-interlace Non-interlace Non-interlace Non-interlace Non-interlace Non-interlace Non-interlace Non-interlace Non-interlace Non-interlace Non-interlace Non-interlace Non-interlace Non-interlace Non-interlace Non-interlace Non-interlace *1 No. 8 and No. 9 signals come in, thin lines will become obscured because their signal resolution is higher than the screen resolution. *2 The signal is recognized as VGA400/70, and the status is displayed as "VGA400/70". *3 The signal is recognized as SXGA+60, and the status is displayed as "SXGA+60". *4 The signal is recognized as SXGA+60*, and the status is displayed as "SXGA+60*". *5 Only supports analog RGB input. ● Non-preset signals may not be displayed normally even if the frequency is within the acceptable range. ● When a preset signal comes in, the signal format is shown on the status display. When a non-preset signal comes in, "Out Of Range" appears. Specification of the HDMI terminal Connect it to the HDMI output terminal of a video device. Pin No. Input signal

  1 T.M.D.S Data 2+ Pin No. Input signal 8 T.M.D.S Data 0 shield 2 T.M.D.S Data 2 shield 9 T.M.D.S Data 0-  3 T.M.D.S Data 2-  4 T.M.D.S Data 1+ 10 T.M.D.S Clock+ 11 T.M.D.S Clock shield 5 T.M.D.S Data 1 shield 12 T.M.D.S Clock- 6 T.M.D.S Data 1- 13 CEC 7 T.M.D.S Data 0+ 14 Spare (not connected) Specification of the mini D-SUB15pin terminal Connect it to the mini D-SUB15pin output terminal of a video device. Pin No. Input signal 1 Red video signal 2 Green video signal or Sync on Green signal 3 Blue video signal 4 Not connected 5 Ground Pin No. Input signal 6 Red video signal return 7 Green video signal return 8 Blue video signal return 9 Not connected 10 Ground 11 Not connected Pin No. Input signal 15 SCL 16 SDA 17 DDC/CEC GND 18 +5 V Power 19 Hot Plug Detect Pin No. Input signal 12 I2C data 13 Horizontal or Composite synchronization signal 14 Vertical synchronization signal 15 I2C clock Notice on transportation This monitor is precision equipment and needs dedicated packing material for transportation. Never use any packing material supplied from sources other than JVC or JVC-authorized dealers. ● For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed, and may be slightly different from actual products. ● Design and specifications are subject to change without notice. ● All company names and product names mentioned herein are used for identification purposes only, and may be the trademarks or registered trademarks of their respective companies. 30