JVC GR-SXM740U User Manual - Page 22
Advanced Features - video camera
UPC - 046838160400
View all JVC GR-SXM740U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
ADVANCED FEATURES Night-Alive (GR-SXM740/SXM340 only) Makes dark subjects or areas even brighter than they would be under good natural lighting. 1) Set the Power Switch @ to " " or " ". 2) Press NIGHT-ALIVE e repeatedly until the desired mode appears. A NIGHT AUTO: The shutter speed is automatically adjusted (maximum 1/6 sec.). 1 NIGHT 10X (only when the Power Switch @ is set to " "): The shutter speed is set to 1/6th of a second to provide 10 times the sensitivity. 2 NIGHT 60X (only when the Power Switch @ is set to " "): The shutter speed is set to 1 second to provide 60 times the sensitivity. • To cancel the effect, press NIGHT-ALIVE e repeatedly until "OFF" appears. • During Night-Alive, the following cannot be activated: "Picture Stabilizer", "Program AE With Special Effects", "Digital Effects" and "S.LX" in CAMERA MENU (੬ pg. 19). • Night-Alive does not work when LIGHT OFF/ AUTO/ON # is set to "AUTO" or "ON" (੬ pg. 13, "Video Light"). • During Night-Alive, it may be difficult to bring the camcorder into focus. To prevent this, use of a tripod is recommended. Fade/Wipe Effects Fade- or wipe-in works at recording start, and fadeor wipe-out works at recording end. 1) Set the Power Switch @ to " ". 2) Press FADE/WIPE ) repeatedly until the desired mode appears. 3) Press the Recording Start/Stop Button ! to activate fade-in/out or wipe-in/out. • Pressing and holding the Recording Start/Stop Button ! allows you to vary the length for the image during fade in/out or wipe in/out. • To cancel a fade or wipe, press FADE/WIPE ) repeatedly until "OFF" appears. FADER: Fades in/out to a black screen. MOSAIC (Fader): Gradually turns/returns the picture into/from a mosaic pattern. SHUTTER (Wipe): A black screen moves in from the top and bottom, closing over the image like a shutter, or a new image pushes open the black screen vertically from the center. SLIDE (Wipe): A black screen moves in from the left to gradually cover the image, or a new image moves in from right to left. DOOR (Wipe): Wipes in as the two halves of a black screen open to the left and right, revealing the scene, or wipes out and the black screen reappears from left and right to cover the scene. CORNER (Wipe): Wipes in on a black screen from the upper right to the lower left corner, revealing the scene, or wipes out from lower left to upper right, leaving a black screen. WINDOW (Wipe): Wipes in on a black screen from the center of the screen towards the corners, revealing the scene, or wipe out from the corners to the center, leaving a black screen. GR-SXM740U_EN 22 22 02.4.22, 6:02 PM