JVC GRAX890 Instructions - Page 11

RECORDING Set REC MODE, TAPE LENGTH and DATE/TIME in SYSTEM MENU. (੬ pg. 18 - 22, "MENU SETTINGS") 1 Remove the lens cap. Set the Power Switch ! to " " or " " while pressing down the Lock Button 0 located on the switch. The camcorder enters the Record-Standby mode and "PAUSE" j is displayed. 2 Press the Recording Start/Stop Button 9. Y appears while recording is in progress. • To stop recording, press the Recording Start/Stop Button 9. The camcorder re-enters the RecordStandby mode. PLAYBACK 1 Load a tape (੬ pg. 8, "Loading/Unloading A Cassette"). 2 Set the Power Switch ! to "PLAY" while pressing down the Lock Button 0 located on the switch. To start playback, press B/ ; %. To stop playback temporarily (Still Playback), press B/ ; %. To stop playback, press 9 w. Press Q q to rewind, or R ^ to fast-forward the tape. Highspeed picture search (Shuttle Search) is possible by pressing Q q or R ^ during playback (holding Q q or R ^ down during playback continues search until released). To resume normal playback, press B/ ; %. For VIDEO RECORDING/VIDEO PLAYBACK • The camcorder shuts off automatically after about 5 minutes in the Record-Standby or Stop mode. To turn on again, set the Power Switch ! to "OFF", then to " ", " " or "PLAY". • The playback picture can be viewed in the viewfinder or on a connected TV (੬ pg. 15, "Connections To A TV/VCR"). • To remove the indications, ੬ pg. 20, DISPLAY or OSD OUTPUT in SYSTEM MENU. 11