JVC GY-HM710U GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM
JVC GY-HM710U Manual
View all JVC GY-HM710U manuals
Add to My Manuals
Save this manual to your list of manuals |
JVC GY-HM710U manual content summary:
- JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 1
HD MEMORY CARD CAMERA RECORDER GY-HM710U Thank you for purchasing this JVC product. Before operating this unit, please read this sheet and the instructions of the separate volume carefully to ensure the best possible performance. Please change the model number under [For Customer Use:] on the cover - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 2
switch to "ON". ● The initial screen appears. Memo : ● It is recommended to use an AC adapter for power supply. ● Make sure that the lens cap is attached. 2 appears. For details on [Initial Setting], refer to the instructions manual. DEUTSCH SYSTEMDIAGNOSE Wenn Sie dieses Gerät nach dem Erwerb zum - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 3
HD MEMORY CARD CAMERA RECORDER GY-HM750U INSTRUCTIONS GY-HM750CHU GY-HM750E GY-HM750CHE * The illustration shows the GY-HM750E with the supplied viewfinder, microphone and lens attached. * GY-HM750CHU/GY-HM750CHE does not come with a lens. For Customer Use: Enter below the Serial No. which - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 4
local power company. For appliance designed to operate from battery power, refer to the operating instructions. 10. For added protection for this product during a a need for service. 17. When replacement parts are required, be sure the service technician has used replacement parts specified by - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 5
servicing) instructions in the literature accompanying the appliance. INFORMATION: This equipment has been tested uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual A UN AGENT QUALIFIE EN CAS DE PROBLEME. Le symbole de l'éclair àl'inté - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 6
video appliances and can be used in VIDEO], [PB], [PR] [AUDIO INPUT 1/2] Exclusive Cable Coaxial Cable Shielded Cable 5 m 10 m 3 m [AUDIO OUTPUT] Shielded Cable 10 m [PHONES] Exclusive Cable 3 m [IEEE1394] Exclusive Cable 3 m [HD/SD Limited ist: JVC Technical Services Europe GmbH Postfach - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 7
FOR USE IN CHINA ONLY V - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 8
Cards to Use 31 Formatting (Initializing) SDHC Cards 33 Restoring the SDHC Card 34 Clips Recorded to SDHC Cards 35 Shooting Basic Shooting Procedures 36 Shooting 36 Focus Assist Function 37 Selecting System Definition, File Format and Video Format 38 Selecting the Aspect Ratio of SD Videos - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 9
Used Menu Items (Favorites Menu 96 Adding Menu Items to Favorites Menu 96 Editing Favorites Menu 97 Status Screen Status Screen in Camera Mode 100 Status Screen in SD Card 129 Alarm Tone 129 Troubleshooting 130 Specifications 131 How to use this manual � Symbols used Note � Describes - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 10
with a 35 Mbps high quality mode, in addition to the HDV mode bit rate (19/25 Mbps). Wide Variety of Recording Formats This camera recorder supports various HD formats (1080i, 1080p, 720p) as well as SD (DV) formats (480i : U model, 576i : E model), enabling it to be used under various environments - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 11
as Anton Bauer and IDX batteries that are used in the broadcast industry can be used with this camera recorder. Support for Wide Variety of Output Supports industrial output such as HD-SDI output and IEEE1394 output. Application Software Provided The [JVC ProHD Clip Manager] application software is - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 12
on the SDHC cards. Always use oil-based pens. � If you format (initialize) the SDHC card, all data recorded on the card, including video data and setup files, will be deleted. � You are recommended to use cards that are formatted (initialized) on this camera recorder. ● The SDHC card may be damaged - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 13
(magnification chromatic aberration) may occur at the periphery of the image. This is not a camera malfunction. LCD Monitor and Viewfinder � The LCD monitor and viewfinder screens are manufactured using high-precision technology. Black spots may appear on the LCD monitor and viewfinder screens, or - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 14
mode indicator on the left side of the camera recorder lights up according to the mode. Camera Mode Camera Mode Media Mode [CAM/MEDIA] Selection Button [CAM/MEDIA] Selection Button IEEE1394 Mode [CAM/MEDIA] Selection Button SD Card Mode Thumbnail Display Playback Button Stop Button Playback - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 15
turned on during thumbnail display in Media mode (SD Card mode). (Only for HD video systems) When an SD video system is in use, availability of the [IEEE1394] terminal connection cannot be detected in Media mode (SD Card mode). Allow the camera recorder to detect the [IEEE1394] terminal connection - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 16
switch (A Page 12) I on the control panel on the right side of the camera recorder to AAB or ABB starts up the Auto White function. ● If the [WHT (A Page 46) G [DISPLAY] Display Button (A Page 30) H [CAM/MEDIA] Camera/Media Mode Selection Button (A Page 8) I [FULL AUTO] Full Auto Shooting (FAS) - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 17
a ZY X W W O V P Battery Adapter (A Page 22) SDHC Slot (A Page 15) Q R S Side Terminal (A Page 14) The [REC] trigger button (A Page 12) K at the side control panel on the right of the camera recorder is not locked. Z [REC] Rec Trigger Button (Recording Start/Stop) Starts/stops recording. Memo : - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 18
37) D [USER1], [USER2], [USER3] User Buttons (A Page 79) Use these buttons to switch shooting conditions according to the object. The functions change as below according to the operation mode (A Page 8). During Camera mode During Media mode [USER1] Button ● Activates the function assigned - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 19
Memo : ● When [Camera Function] menu B [Switch Set] B [AE LEVEL] is set to AAE LEVEL/VFRB, the cross-shaped button (H I) is used to set the number of frames during Variable Frame Rec. ( A Page 60 [Variable Frame Rec]) ( A Page 80 [AE LEVEL]) � During Media mode (SD Card mode) (A Page 61) Thumbnail - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 20
HD/SD-SDI] HD/SD-SDI Output Terminal (BNC) (A Page 120) B [Y/VIDEO] Y/Composite Video Signal Output Terminal (BNC) (A Page 120) C [PB] PB Video Signal Output Terminal (BNC) (A Page 120) D [PR] PR Video rear of the camera recorder. (A connecting digital video equipment with IEEE1394 terminal using an - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 21
, the camera recorder may fall and cause injuries. ● Check the instruction manual provided with the shoulder belt before using. B using this terminal, make sure that the Battery Adapter C is removed. C Battery Adapter (A Page 22) The shape is different for GY-HM750CHU/GY-HM750U and GY-HM750CHE/GY - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 22
with GY-HM750U/GY-HM750E Review] of [Switch Set] in the [Camera Function] menu. (A Page 79) ( A Page 56 [Viewing Recorded Videos Immediately (Clip Review)]) Memo : ● When [LENS RET] of [Switch Set...] in the [Camera operation mode. M : Manual iris operation mode. I can also be used. ● Installable - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 23
Control HZ-ZS13B 1/3 Zoom Lens KT14x4.4KRSJ (CANON) (GY-HM750U/GY-HM750E only) Battery Adapter GY-HM750CHU/GY-HM750U:Gold Mount GY-HM750CHE/GY-HM750E:V Mount Anton Bauer Battery (Dionic90) Anton Bauer Battery Charger For GY-HM750CHE/GY-HM750E* BR-HD50U/E* Non-linear Editing System Standard - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 24
camera status, media information, zebra pattern, and various markers in the video image on the LCD monitor and viewfinder screens during shooting. Besides camera USER 1 BARS USER 2 B.STRETCH3 USER 3 LOAD FILE RET CLIP REVIEW SKIN/SPOT SPOT METER AELEVEL AE LEVEL/VFR STBY 282min Jan 2. - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 25
(VF/LCD) During Clip Playback in Media Mode (SD Card Mode) (A Page 106) The display switches between only the characters of the status screen on the LCD monitor. (Camera mode only) CH1 CH2 DF FREE A STBY 1280 x 720 min video image remains displayed on the viewfinder. 282min STATUS 1 Screen 19 - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 26
indicate the luminance level of the video image can be displayed on this camera recorder. You can set the luminance levels for displaying the two types of zebra patterns. ( A Page 53 [Setting Zebra Pattern]) Zebra Pattern [Main Menu] Screen Memo : ● Use - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 27
Accessories Knob Microphone Attaching the Zoom Lens (Supplied with GY-HM750U/GY-HM750E only) Hole Pin 13 REC 2 Clamp When attaching or removing the zoom lens, set the [POWER] switch of the camera recorder to AOFFB. Attaching the Microphone (Supplied) You can attach the supplied microphone - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 28
of the recommended batteries. Heavy batteries may fall off if not used correctly. ● See the battery instruction manual on how to charge the battery. [DC INPUT] DC Cable DC OUTPUT AC Adapter 2 Set the [POWER] switch of the camera recorder to AONB after turning on the AC adapter. Power will be - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 29
POWER] switch to AOFFB. Remove the battery if you are not using the camera recorder. Attaching the Battery (GY-HM750CHU/GY-HM750U) Use the Dionic90 (Anton Bauer) battery. 1 Align the battery guide pins (x3) with the battery, adapter, and guide hole, and insert straight. Guide Hole (x3) Release Lever - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 30
will be displayed in red. Note : ● If the battery in use is not a recommended one, the battery mark which indicates the battery level may not appear. � Status Screen ( A Page 100 [Status Screen in Camera Mode]) ( A Page 106 [Status Screen in SD Card Mode]) ( A Page 107 [Status Screen in IEEE1394 - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 31
card is not possible in Camera mode. However, you can use the Clip Review function to check the most recently recorded video clip. (A Page 56) � Media Mode (SD Card first set the [POWER] switch of the camera recorder to AOFFB. Do not remove the battery or turn off the AC power while the [POWER] switch - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 32
data is saved in the built-in rechargeable battery even if the power is turned off. Setting to AONB. The [Initial Setting] screen appears. � For GY-HM750CHU/GY-HM750U 2 Specify [Time Zone] and [Date/Time]. A monitor and viewfinder and be recorded to the SDHC card. ● The value of the year can be set - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 33
: ● To perform the settings while looking at the monitor screen connected to the video signal output terminal, set [Analog Out Char.] or [SDI Out Char.] in the Modes During Camera mode Date/time of the built-in clock is displayed. During Media mode Shooting date/time of the clip being (SD Card mode) - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 34
or wide angle end. ● Place an object 3 m and above away from the camera recorder. ● The Siemens Star Chart is most suitable as the object. 3 4, 6 Set the iris mode switch of the lens to AMB (manual). 2 Set the zoom mode switch to AMANU.B (manual). 3 Turn to open the iris ring. Adjust the lighting - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 35
the brightness level is displayed on the LCD monitor screen. ● During Camera mode, SD Card mode (playback), or IEEE1394 mode [VF PEAKING] Knob [VF BRIGHT] affect the recorded images. Note : ● A high-definition viewfinder is used on this camera recorder in order to provide an accurate focusing - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 36
monitor is stored in the camera recorder in the direction of normal display, pressing of the [DISPLAY] button will not work. ● You can display both menu settings. When the battery or remaining space on the SDHC card is low, the lamps blink. (Camera mode only) * Set using [Tally System]/[Front Tally - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 37
. �Estimated Recordable Time of SDHC Cards The estimated recordable time is only a guide. Differences may occur depending on the SDHC card in use and the battery condition. ( A Page 75 [Camera Resolution]) ( A Page 75 [Frame & Bit Rate]) Camera Resolution Bit Rate 1280x720 1440x1080 HQ - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 38
/reading data) Do not turn off the power of the camera recorder or remove the SDHC card. On standby. Inserted SDHC card can be used for recording or playback. ● SDHC card is not inserted. ● An unusable card is inserted. ● An SDHC card is inserted but a different slot is selected. 3 4 Memo : ● When - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 39
Basic Operations in Menu Screen] (A Page 70). Note : ● Be sure to format the SDHC card on this camera recorder. SDHC cards formatted on a PC and other peripheral equipment cannot be used on this camera recorder. Memo : ● To cancel the message display, press the [CANCEL] button. A [!] mark appears at - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 40
Restore Media] can only be selected in Camera mode. However, it cannot be selected while the camera recorder is recording. Select [Restore Media] in Camera mode when the camera recorder is not recording. ● [Restore Media] does not restore the SDHC card to its original states completely. If restoring - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 41
the menu settings below. System Definition Setting File Format Setting Record Folder HD (MPEG2) MOV CQAV HD (MPEG2) MP4 BPAV SD (DV) MOV CQDV SD (DV) AVI CADV Memo : ● By formatting (initializing) the SDHC card from the [Format Media] menu on the camera recorder, folders required for - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 42
battery or AC adapter power to the camera recorder. (A Page 22) 3 Insert an SDHC card. (A Page 31) 4 Turn on the power of the camera recorder. Set the [POWER] switch to AONB. The camera recorder starts up in Camera (Clip Review). Press the [RET] button on the lens to activate the Clip Review function - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 43
function to the [RET] button on the lens You can assign the Focus Assist function to the [RET] button on the lens. * Set [Main Menu] B [Camera Function] B [Switch Set] B [LENS RET] to AFocus AssistB. (A Page 79) 37 - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 44
video images on this camera recorder. Memo : ● Make a selection in [Main Menu] B [Record Format] menu. Selecting a System Definition Select the system definition in [System Definition]. There are two different definitions for selection. HD (MPEG2) : Records in HD (High Definition) quality SD - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 45
Aspect Ratio of SD Videos Select an aspect ratio for the images. The available options vary as follows depending on the [System Definition] setting. manually even if the [FULL AUTO] switch on the camera recorder is set to AONB. (A Page 81) ● You can use the cross-shaped button (H I) on this camera - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 46
the cross-shaped button (JK) to switch between the speeds. [FULL AUTO] Switch Fixed Gain Mode (Manual Gain Switching) You can select the gain of the video amplifier using the [GAIN] switch on the camera recorder. The default positions of the switch are as follows. [L] : 0 dB (No electrical boosting - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 47
�Switching Shutter Speed When shutter is ON, use the cross-shaped button (JK) to set the shutter speed. Shutter speed differs according to the video format and variable frame rate settings. � During modes other than Variable Frame Rec Shutter Camera Resolution/ Frame & Bit Rate J Button Step ( - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 48
Manual White Balance Mode (Manual Switching) You can select the white balance with the [WHT.BAL.] selection switch. Use to the [A], [B], or [PRESET] button using [Switch Set] in the [Camera Function] menu. (A Page 79) ● In Display Note : ● Do not use highly reflective objects, such as metals. - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 49
color on the object, or when the color temperature is not suitable. Use another white object and adjust the white balance again. ERROR : LOW WHT.BAL.] selection switch is disabled. Memo : ● When [White Balance] in the [Camera Function] B [FULL AUTO] menu is set to ASW SetB, you can switch the white - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 50
is insufficient even at F4, set to the optimum brightness by increasing the lighting. B When using a zoom lens, set to the center of the zoom adjustment range. 3 Adjust the white balance of the camera recorder. ( A Page 42 [Memory A Mode (A), Memory B Mode (B)]) 4 Set the chroma level of the monitor - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 51
Setting the ND Filter Use the ND filter to keep the lens aperture in the appropriate range. Switch according to the brightness of filter, set [Filter] in the [LCD/VF] B [Status Display] menu to AOnB. (A Page 90) ● It is recommended to use the ND filter to set the lens aperture to less than F5.6. 45 - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 52
video images on this camera recorder. The camera manually Use this setting when connecting to a dynamic microphone. Use using Use the Manual Adjustment Mode (Manual Adjustment) Set the [AUDIO SELECT CH-1/CH-2] switch on the camera recorder to AMANUALB to enter the manual adjustment mode, and use Manual - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 53
CH-1/CH-2] switch on the camera recorder even if the [FULL AUTO] switch is set to AONB. (A Page 81) �Using Stereo Type Earphone Jack When a when there is an abnormality in the camera recorder. Alarm tone is also output when the SDHC card is full or when the battery is low. (A Page 129) ● Alarm - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 54
is not supported. ● Values recorded on the SDHC card is displayed in Media mode. Setting Display TC Time Code UB User's Bit LCD/VF Display VIDEO Output LCD screen. respective video � STATUS 1 screen in Camera mode � STATUS 1, STATUS 2 screens in Media mode (SD) output images during the - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 55
in the time code generator. 2 Select the framing mode for the time code generator (only when the frame rate setting is A60B or A30B). Set using [Main Menu] B [TC/UB] B [Drop]. (A Page 88) [Drop] [Non Drop] Sets the run mode of the time code generator to drop frame mode - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 56
[TC GENE.] switch is set to AREGENB, the parameter is displayed as ARegenerationB and cannot be selected. 2 Set the time code (hour, minute, second, frame). Use the cross-shaped button (H I) to place the cursor at the item to set, then the cross-shaped button (JK) to change the values. Cursor Memo - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 57
recorder is not in the Camera mode. �Required Settings Before Preset (A Page 49) ● Set the [TC DISPLAY] switch to ATCB. ● Set the [TC GENE.] switch to settings other than AREGENB. [TC Preset] Screen (During drop frame) 2 Set the time code (hour, minute, second, frame). Use the cross-shaped button - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 58
Time Code in Continuation of the Recorded Time Code on SDHC Card This camera recorder is equipped with the time code reader. Setting User's of the clip settings. (A Page 88) [UB Preset] Screen 2 Set the user's bit. Use the cross-shaped button (H I) to place the cursor at the item to set, then the - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 59
overlaps, the two zebra patterns overlap and are displayed in a grid. 3 Display the zebra pattern. Set the [ZEBRA ON/OFF] switch in front of the camera recorder to AONB to display the zebra pattern at the specified range. Zebra Pattern [ZEBRA ON/OFF] Switch Specify the upper (Top1, Top2) and lower - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 60
shooting is displayed. This function is useful when setting video or stage lighting or when specifying camera exposure. A cursor indicating the in the screen. Frame may also be stopped at the current positions. [Manual] Displays the brightness (%) of the specified position. Green (Blinks in red - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 61
� When [Manual] is selected A [SPOT METER FIXED] is displayed when the switch is Mark] cannot be deleted from the camera recorder using [Delete Clip]. (However, they will be deleted when the SDHC card is formatted.) ● When the camera recorder is in Media mode (SD Card mode), you can delete the [OK - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 62
Videos Immediately (Clip Review) You can check (review) the last recorded video clip on the screen. However, the video clip cannot be played back if the settings of the camera recorder are different from the video format (Camera Resolution/Frame & Bit Rate) of the clip. (A Page 75) Memo : ● To use - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 63
in both the slots are identical, and backup recording can only be performed on this camera recorder. ( A Page 76 [Slot Mode]) REC Slot Status Indicator [REC] Button since they are recorded seamlessly. ● If the last clip on the cards that are loaded to the two slots are different from each other, - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 64
you start recording by making use of two cards with the same capacity and from the formatted state. ● You can combine the use of the Dual Rec mode recording video and audio before actual recording starts based on the Pre Rec Time setting. When starting actual recording while the camera recorder - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 65
after recording stops ● Immediately after switching from Media mode to Camera mode ● Immediately after setting [Rec Mode] ● Immediately after the end of Clip Review ● Immediately after changing file format ● Immediately after changing video format Clip Continuous Rec In normal recording, when the - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 66
. Using different frame rate settings for recording and playback, videos captured at normal speed can be played back more smoothly than those in low or high speed playback. To enable Variable Frame Rec, the following two settings are required at the same time. ● [Camera Resolution] in the [Record - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 67
returns to the previous screen. Stops video playback. Name A Cursor Description Indicates the selected clip. Use the crossshaped button (JKHI) to move the cursor. After power is turned on and SDHC card is inserted, or when the camera recorder is switched to Media mode (SD Card mode), the cursor is - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 68
] B [System Definition], [Camera Resolution], and [Frame & Bit Rate] items of the [Main Menu] screen. (A Page 75) Displays the [running number/total number of clips] of the displayed clips. : Ample battery power. : Slightly reduced battery power. : Low battery power. : Empty battery power. (Blinks - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 69
camera recorder. B Continued From Mark This mark indicates that the current clip is continued from another SDHC card when recording is divided and made on several SDHC cards continue to another SDHC card when recording is divided and made on several SDHC cards. Guide for the current operation - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 70
Use the crossshaped button (H I) to move the cursor. After power is turned on and SDHC card is inserted, or when the camera recorder is switched to Media mode (SD Card Variable Frame : Variable frame (only in Variable Frame Rec) Guide for the current operation buttons. Moves the clip cursor to the - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 71
Use the operation buttons on the side control panel of the camera an SDHC card can be displayed on the LCD monitor and viewfinder. Memo : ● When [HD/SD-SDI Out] HD/SD-SDI] output terminal. (A Page 92) ● User's bit output from the [HD/SD-SDI] output terminal is used as a flag to determine valid video - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 72
appended with OK marks cannot be deleted on the camera recorder. ● Read-only clips can be deleted on to confirm deletion appears. 3 Select [Delete] using the cross-shaped button (JK), and press the is selected. ● Write-protect switch of the SDHC card is set ( is displayed). �During Thumbnail Screen - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 73
4 Select [Delete] using the cross-shaped button (JK), and press the Set button (R). Deleting starts. 3 Memo : ● Button operations are unavailable during deletion. The deleting operation cannot be canceled. ● - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 74
deleted, thus protecting the important clips. When the camera recorder is in Media mode (SD Card mode), you can delete the OK marks appended during and OK marks cannot be appended when the write-protect switch of the SDHC card is set ( is displayed). ● AOK Mark Added...B is displayed when changing - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 75
is deleted. 1 Memo : ● The [USER1] button is disabled (displayed in gray) and OK marks cannot be deleted when the write-protect switch of the SDHC card is set ( is displayed). ● AOK Mark Added...B/AOK Mark Deleted...B is displayed when changing marks and other operations are unavailable. 69 - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 76
the status screen. � During Camera mode: [STBY], [REC], etc. (A Page 100) B Cursor C Menu Item D Fixed Item E [Back] Back F Menu Title G Remaining Battery Power � During Media mode (SD Card mode): [PLAY], [STILL], etc. (A Page 107) Indicates the selected item. Use the crossshaped button (JK) to - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 77
of setting values C appears in a pop-up. Guide for the current operation buttons. A pop-up Prefix]. B Character Cursor Select a character using the key cursor D, and press the Set the Set button (R) on the side control panel of the camera recorder to delete the character on the left of the - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 78
Set... (A Page 75) Record Format...(A Page 75) System Definition File Format Camera Resolution Frame & Bit Rate Aspect Ratio Rec Mode... (A Page Ref. Input2 Mic Ref. Mic Wind Cut Audio Ref. Level Audio Limiter Test Tone Camera Process... (A Page 82) Detail Master Black Black Toe Knee White Clip - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 79
Drop Shooting Assist... (A Page 89) Marker Setting... (A Page 90) Status Display... (A Page 90) LCD + VF VF Display LCD Mirror Mode Output Terminal Set Up HD/SD-SDI Out Down Convert Analog Out Char. SDI Out Char. Audio Monitor Alarm Level Tally System Front Tally Back Tally 1394 Rec Trigger 1394 - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 80
camera recorder. These items are displayed in gray, and they cannot be selected. Item Function Record Set... Menu screen for specifying video screen. This menu screen can be used to specify settings related to the Focus as a file on the camera recorder or an SDHC card, and the saved settings can - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 81
. Item System Definition Setting Values HD (MPEG2) SD (DV) Function For selecting a system definition. HD (MPEG2) : Records in HD (High Definition) quality. SD (DV) : Records in SD (Standard Definition) quality. Note : ● The selectable options for the [File Format], [Camera Resolution], and - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 82
the record mode for recording to the SDHC card. (A Page 58) Memo : ● [Variable Frame] is selectable when [Camera Resolution] is set to A1280x720B, and [Frame LEVEL] in the [Main Menu] B [Camera Function] B [Switch Set] menu is set to AAE LEVEL/VFRB, you can use the cross-shaped button (H I) to - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 83
Input2 Input1 Off Audio Ref. Level -12dB -20dB Audio Limiter On Off Test Tone On Off Function For setting the reference input level when the [AUDIO low-cut. For setting the audio reference level to be recorded to the SDHC card. (Applies to both [CH1/CH2].) -20dB : Outputs signals of the - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 84
(Auto Exposure). This can also be adjusted using the cross-shaped button (H I) on the right of the camera recorder. Fast Middle Slow For setting the AALCB is set. Fast Middle Slow Off : Runs the Smooth Trans function at high speed. : Runs the Smooth Trans function at medium speed. : Runs the - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 85
] under [Black Toe] in the [Camera Process] menu. (A Page 82) LENS RET Clip Review OK Mark Focus Assist Return For assigning a function to the [RET] button on the lens. This function does not work if the [RET] button is not available on the lens in use. Clip Review OK Mark Focus Assist Return - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 86
SPOT METER Max&Min Min Max Manual For specifying the operation of [Spot Meter]. (A Page 54) Max&Min Min Max Manual : Displays the brightest and the operation of the cross-shaped button (H I) on the right of the camera recorder. AE LEVEL/VFR: Sets the number of frames during Variable Frame Rec, - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 87
FULL AUTO Item This is used to set specific functions to the auto mode when the [FULL AUTO] switch of the camera recorder is set to AONB. Item Gain Setting Values SW Set ALC Function SW Set : Sets gain according to the [GAIN] selection switch. ALC : Sets - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 88
Settings Camera Process video signals beyond a certain level to show the gradation of the highlighted portion. To check the gradation of a bright area, set to AManualB and adjust the knee point manually. Manual : Enables manual adjustment of the knee point (starting point of knee operation) using - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 89
setting the point to apply white clip for input video signals with a high luminance level. 100% 108% : Applies white Min Gamma curves can be adjusted for each of R, G, and B. Use this to adjust to a color tone that cannot be expressed by the [ Camera Process] menu to their default settings. 83 - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 90
frequency range. High : Emphasizes the high frequency range. Memo : ● This item can only be selected when [Camera Resolution] of [Record Format] in the [Record Set] menu is set to A1280x720B. (A Page 75) Skin Detect On Off For turning On/Off the Skin Detail function, which is used to adjust the - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 91
This item is selectable when the [WHT.BAL.] selection switch on the right of the camera recorder is set to AAB or ABB. When APRESETB is set, this item appears shading adjustment to a fixed level. Manual adjustment is disabled. Manual : Enables manual white shading adjustment. For making white - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 92
Detailed Settings Camera Process Menu at the bottom of the screen. Color Matrix/Adjust Item This item is used to adjust [Color Matrix] to a color according to the user's of magenta/red. For adjusting the red/yellow level of the video toward red. Increase the number : Enhances the red component of - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 93
the cyan component of green/cyan. Decrease the number : Reduces the cyan component of green/cyan. For adjusting the cyan/blue level of the video toward cyan. Increase the number : Enhances the cyan component of cyan/blue. Decrease the number : Reduces the cyan component of cyan/blue. For adjusting - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 94
Non Drop : Internal time code generator works in the non-drop-frame mode. Use this setting when placing emphasis on the number of frames. viewfinder image in color. Memo : ● The setting of this item is valid only in Camera mode. ● When this item is set to AB & WB, only the captured images - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 95
specifying the operation when the [FOCUS ASSIST] button on the camera recorder is pressed. (A Page 37) ACCU-Focus Normal High Middle Low For setting the frequency range for applying contour enhancement using the [VF PEAKING] adjustment knob or [LCD PEAKING +/-] button. High : Emphasizes the high - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 96
Zone Displays (Camera Mode Only)]) the final image aspect ratio to be used from the overall angle of view. Clip Review or when in the video format mode. Off : Hides the video format mode. Media Remain On Off For specifying whether to display the remaining space of the recording SDHC card - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 97
obtained otherwise. For more details, refer to the instruction manual of the battery. ● The remaining battery power and remaining time are intended as reference values for the shooting duration. ● When an IDX battery is loaded while the camera recorder is connected to a KA-MR100G (Memory Recorder - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 98
SDI signals from the [HD/SD-SDI] output terminal on the side of the camera recorder. HD-SDI SD-SDI Off : Outputs HD-SDI signals. Embedded (superimposed) audio signals and the time code are also output. : Outputs SD-SDI signals down converted from HD. When [System Definition] in the [Record Format - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 99
and CH-2 to R). When a monitor speaker is used, only the audio sound of CH-1 is output. � [PHONES] terminal, high volume level. : Outputs alarm tone at a medium volume level. : Outputs alarm tone at a low volume level. : Alarm tone is not output. For setting the display conditions of the camera - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 100
using the [CAM/MEDIA] button and the Clip Review function will be disabled. ● When [1394 Rec Trigger] is set to ASplitB, the [REC] button on the side of the camera Turns off the indicator. Operation Mode Color Camera Mode Blue/Purple Media Mode (SD Card Mode) Green Media Mode (IEEE1394 Mode) - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 101
item appears only when the SDHC card needs to be restored. However, it is not selectable when recording in Camera mode and during Clip Review. Setup File Manage Menu Menu settings and button operations ([SHUTTER], [AE LEVEL], etc.) can be saved. It is useful to save settings according to different - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 102
frequently used menu items freely to create a personal menu screen (Favorites Menu). Memo : ● [Favorites Menu] is only enabled in the Camera mode in the following cases. [USER1 Add] is displayed in gray in the operation guide. ● Selected item is already added to [Favorites Menu]. ● Number of menu - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 103
Editing Favorites Menu You can delete or change the order of the items added to [Favorites Menu]. �Deleting Items from [Favorites Menu] 1 Open the [Favorites Menu] screen. A Press the [MENU] button to open the [Main Menu] screen. B Press the [STATUS] button to open the [Favorites Menu] screen. 2 - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 104
Menu Display and Detailed Settings Adding/Editing Frequently Used Menu Items (Favorites Menu) (continued) 2 Editing Favorites Menu (continued) �Changing the Order of Items in [Favorites Menu] [USER1] Button [USER2] Button Header (Magenta) [MENU] Button - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 105
4 Select the position to move to with the cross-shaped button (JK). Move the position selection bar with the cross-shaped button (JK) and select a position to move to. 5 Press the Set button (R). The selected item moves to the new position. 4 5 6 Press the [USER1] button. The option menu to exit the - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 106
Camera card slot operation is set to ADualB. (A Page 76) ---- : No card found in the selected slot* STBY : Recording standby REC : Recording REVIEW : Clip Review the card in a card is display the information using [F.No/Iris in the [Camera Function] menu is in the [Camera Function] video - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 107
for about 3 seconds when the gain or shutter speed is manually changed. For other messages displayed in this area, refer B) Active SDHC slot is switched automatically or using the [SLOT SELECT] button in Camera mode. TRIGGER TO EXT Recording command is the video format settings. (A Page 41) 101 - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 108
Mark D Dual Rec Display E Remaining Space on Media Description Displays the video image resolution. (1920�1080, 1440�1080, 1280�720, 720�480, Battery Power G Audio Level Meter A : Currently selected slot. (White card) A! : SDHC card requires restoring or formatting, or SDHC card is not supported - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 109
ND FILTER] is set to A1/16B Memo : ● You can turn ON/OFF the display using [Filter] of [Status Display] in the [LCD/VF] menu. (A Page 90) I status of the connected external device. For details, refer to the instruction manual of the corresponding external device. Memo : ● Only warnings are - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 110
Status Screen Status Screen in Camera Mode (continued) STATUS 2 Screen CAMERA INFORMATION SETUP FILE SCENE G [ SCENE ] F ZEBRA1 cards in slot A and slot B separately. A : Currently selected slot. (White card) A! : SDHC card requires restoring or formatting, or SDHC card is not supported - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 111
12dB B USER 1 BARS USER 2 B.STRETCH3 C USER 3 LOAD FILE DUAL RET CLIP REVIEW D A B 1min 1min SKIN/SPOT AE LEVEL SPOT METER AE LEVEL/VFR E F 282min /VFR) STATUS 4 Screen This screen displays the event. It is also used to display warnings only. 30/24 fps DD 20 min *0 Appears only - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 112
displayed in Media mode (SD Card mode, Media mode). STATUS 0 Screen This screen displays the media status or event. It is also used to display warnings only. Description Appears when an OK mark is added. (A Page 68) Displays the video image resolution. (1920�1080, 1440�1080, 1280�720, 720�480, 720� - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 113
set using [Battery Info] of [Status Display] in the [LCD/VF] menu. (A Page 91) PLAY STILL FWD * REV * STOP POFF : Playing : Still picture playback mode : High-speed : High-speed playback in the reverse direction (* reverse playback speed: 5x or 15x) : Stop mode : Power OFF Displays a guide for - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 114
Camera HQ, 24p SP, 50i, 60i) Displays the video image resolution. (1920�1080, 1440�1080, displayed when the audio format is not supported in the IEEE1394 mode. (32k, 44 can be set using [Battery Info] of OK 67.8min E FG H STBY STOP REC REVIEW Item A Audio Level Meter B Framing Mode Description - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 115
right can be set using [Battery Info] of [Status Display] in the [LCD/ VF] menu. (A Page 91) I Operation of External Device J Time Code (TC)/ User's Bit (UB) Displays the operating status of the connected external device. For details, refer to the instruction manual of the corresponding external - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 116
Marker and Safety Zone Displays (Camera Mode Only) The marker and safety zone displays are useful in helping you determine the Marker You can turn ON/OFF the safety zone and center mark displays as shown below using the [Aspect Ratio], [Safety Zone] and [Center Mark] settings of [Marker Setting] in - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 117
[Safety Zone] Display � When [Aspect Ratio] = A4:3B, [Aspect Marker] = AHalftoneB, and [Center Mark] = AOnB [Off] [95%] [93%] [90%] [80%] [88%] [Center Mark] Display � When [Aspect Ratio] = A4:3B, [Aspect Marker] = AHalftoneB, and [Safety Zone] = A80%B [Off] [On] � When [Aspect Ratio] = - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 118
Camera Features Smoothening the Skin Color (Skin Detail Function) The Skin Detail function can be used to reduce the contour enhancement of video signals for only the skin areas so as to produce a smoother skin tone. Preparations Before Using the Skin Detail Function (Skin Adjust Function) 1 Adjust - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 119
of [Switch Set] in the [Camera Function] menu. (A Page 79) 3 Press the corresponding [USER1]/[USER2]/[USER3] button that is assigned with ABarsB. Color bars are output. Memo : ● During color bar output, you can select whether to output the reference audio signals using [Test Tone] in the [Audio Set - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 120
, and ACinema SubduedB in [Color Matrix] can be stored individually. (A Page 83) 1 Select [Color Matrix] or [Adjust] in the [Camera Process] menu. (A Page 86) 2 Adjust the saturation. ● Use the cross-shaped button (JK) to select a value. ● The correction range (gray area in the chart below) for each - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 121
B&Mg B Level R I Increase the value: Mg Corrected Y increases B&Mg Mg Level YI G R I YI G B Cy Mg B Cy Decrease the value: Corrected Y decreases Increase the value: Corrected Y decreases Decrease the value: Corrected Y increases 3 Adjust Yl&G Mask Range. Adjusting [Yl&G Yl Level] and [Yl&G G - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 122
of contrast. 1 Adjust [Black Toe] in the [Camera Process] menu according to the captured video signals. 2 Set the luminance point (Point Level) ● Set the amount to stretch or compress the dark areas in the image using [Stretch Level] or [Compress Level]. ● The amount of stretch or compression - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 123
of the GY-HD series. : Setting that is suited for movie-like video shooting. Memo : ● The above setup files are used exclusively for loading. They cannot be overwritten or reset. �Compatibility Scene file ● Scene files saved using the GY-HM700 or GY-HM790 series cannot be loaded using this camera - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 124
card is not supported (those other than SDHC Class 6/10 cards, or unformatted cards). (File name appears as A---B.) ● When a write-protected SDHC card is inserted (a mark appears beside the SDHC card icon.) 5 Name the file. Enter the subname using the software keyboard. � Operating instructions - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 125
be loaded from an SDHC card even if the write-protect switch is set. ● A mark is displayed at the right end when there are some settings that are not supported by the setup file (e.g., picture files saved using the GY-HM700 series). These files can be loaded by this camera recorder, but some of the - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 126
(BNC) on the terminal area of the camera recorder. ● Digital video signals, together with embedded (superimposed) audio signals and time code signals, are output for both the HD-SDI and SD-SDI signals. ● User's bit output from the [HD/SD-SDI] output terminal is used as a flag to determine valid - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 127
[PHONES] Terminal Audio output from the [PHONES] terminal can be selected using [Audio Monitor] in the [A/V Out] menu (A Page 93) as well as the [MONITOR SELECT] switch on the camera recorder. The different combinations of settings that are output from the [PHONES] terminal and monitor speaker are - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 128
Backup Device Signal Flow 2 Set the camera recorder to Camera mode. 3 Set the recording video format. Perform setting in the [Record Format] menu. Select a video format in [System Definition]. (A Page 75) [HD (MPEG2)] : Performs backup in the HDV format. [SD (DV)] : Performs backup in the DV - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 129
of external devices, refer to the instruction manual of the respective devices. Note : ● Adjust the camera recorder and external device to the an SD video system is in use, availability of the [IEEE1394] terminal connection cannot be detected in Media mode (SD Card mode). Allow the camera recorder - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 130
the MP4 file format using the (JVC ProHD Clip Manager) PC application software in the bundled CD-ROM. ● For details on how to install the application software, refer to the [User's Guide] of the [SxS Memory Card Device Driver Software] inside the bundled CD-ROM. 1 Connect the camera recorder to the - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 131
Remote Control Unit Connection The switch functions of the camera recorder can be configured using the remote control unit. * Remote control units supported:RM-LP25U, RM-LP55U, RM-LP57U 1 Connect the remote control unit to the camera recorder. Connect the remote cable of the remote control unit to - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 132
1/1000 1/2000 VARIABLE*5 SPEED -6dB -3dB 0dB 3dB 6dB 9dB 12dB 15dB 18dB ALC LOLUX VARIABLE LEVEL LEVEL LEVEL STRETCH*3 NORMAL COMPRESS*3 MANUAL PRESET FAW AW A AW B �: Available -: Not available � - Function IRIS CONTROL MASTER BLACK TALLY (LED) CALL*4 PREVIEW AUTO KNEE KNEE POINT BARS - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 133
� 1/2000 � EEI � MASTER BLACK � IRIS MANUAL, AUTO � MANUAL LEVEL � AI LEVEL � *1 : Only when the [Frame & Bit Rate] of the camera recorder is A60B, A30B, or A24B. *2 your nearest JVC dealer. Also, it cannot be controlled when the camera recorder is set to the Variable Frame Rec - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 134
error is detected. ● SDHC card reading/writing error. (Faulty SDHC card) (***: A, B, A/B) Replace the SDHC card with a new one. FORMATTING REQUIRED [***] Formatting Required SDHC card is not formatted using this camera Format the card using this camera recorder. [***] recorder. (A Page 33 - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 135
] settings. ● The video system of the camera Set [System Definition] in the [Record recorder is not compatible with the Format] menu according to the IEEE1394 IEEE1394 input signal. signal. (A Page 75) ● [REC] button is pressed when the Replace the SDHC card with a new one. media in use has no - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 136
video format setting. ● Is the camera recorder set to the IEEE1394 Input mode? (Operation mode indicator: Lights up in orange) ● Is [System Definition] ● Is the battery too old? ● The time code and user's bit are not displayed in IEEE1394 Input mode. ● Even in Camera mode or SD Card mode, the time - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 137
Definition] in the [Record Format] menu set to ASD (DV)B? (A Page 75) When the SD video system is in use, the camera recorder is unable to recognize the IEEE1394 connection in the Media mode (SD Card x 480 x 3) Lens Section (GY-HM750U/GY-HM750E only) Lens Filter diameter : Canon F/1.6, 14x, f - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 138
recording file format : Video signal HD (HQ mode) HD (SP mode) SD : Audio signal Video format : NTSC setting HD (HQ mode) HD (SP mode) SD : PAL setting HD (HQ mode) HD (SP mode) SD : Approx. 25 minutes (8 GB SDHC card, 35 Mbps, VBR mode) : QuickTime File Format (For Final Cut Pro) MP4 File Format - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 139
40 (VF MOVE) 90 95 (VF MOVE) 56 133 59.8 44.6 108.5 (82.3) 242.3 82.3 225 (166) 231 (S.PAD MOVE) 30 209 291 210 �GY-HM750CHE/GY-HM750E 40 (VF MOVE) 90 95 (VF MOVE) 56 133 59.8 44.6 108.5 (166) 231 (82.3) 242.3 82.3 225 (S.PAD MOVE) 30 209 304 210 - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 140
LST1190-001A GY-HM750U/GY-HM750CHU/ GY-HM750E/GY-HM750CHE HD MEMORY CARD CAMERA RECORDER 2011 Victor Company of Japan, Limited - JVC GY-HM710U | GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 141
- - - SYSTEM DIAGNOSIS - - PLEASE EXECUTE DIAGNOSIS ON USING AT FIRST. FIT LENS CAP! THE TIME IS ABOUT 6 MIN. PUSH � pantalla [Initial Setting]. Para más información sobre [Initial Setting], consulte el manual de instrucciones. ITALIANO DIAGNOSI DEL SISTEMA Quando si accende per la prima volta
HD MEMORY CARD CAMERA RECORDER
GY-HM710U
© 2011 Victor Company of Japan, Limited
LST1250-001A
Thank you for purchasing this JVC product.
Before operating this unit, please read this sheet and the instructions of the separate volume carefully to ensure the best possible
performance.
Please change the model number under [For Customer Use:] on the cover of the instructions of the separate volume to
“GY-HM710U” and take down the serial number.
Accessories and Dimensional Outline Drawing of GY-HM710U is the same as GY-HM750U in the specifications listed in the
instructions of the separate volume.
Functions may vary according to the model. The details are as follows.
T
The INT setting of IEEE1394 Interface Terminal Switch is invalid.
The specifications of the MENU changes to the following due to the differences in the functions listed above.
[RECORD Set Menu] Record Format Menu
[Camera Function Menu] Switch Set Item
[Camera Process Menu] Detail/ Adjust. . . Item
Configuring Setup Files
�
Preset Setup Files (Page 117)
The scene file and picture file that are loaded according to different shooting conditions are as follows.
�
: Provided
-
: Not Provided
GY-HM710U
GY-HM750U
GY-HM750CHU
GY-HM750E
GY-HM750CHE
Main Page
1280 × 720p
Recording & Playback
-
�
1440 × 1080 / 50i
Recording & Playback
-
�
1920 × 1080 / 50i, 25p
Recording & Playback
-
�
Variable Frame Rec
-
�
Page 60
Dual Rec
-
�
Page 57
Accessory Connection Terminal
-
�
Page 15 Rear
B
IEEE1394 Interface Terminal Switch
INT
T
/ EXT
INT / EXT
Page 14
Side Terminal
H
Item
Setting Value
Page
Camera Resolution
1920 × 1080
1440 × 1080
720 × 480
Page 75
Frame & Bit Rate
When [Camera Resolution] is
“1440 × 1080”
60i(HQ)
60i(SP)
When [Camera Resolution] is
“1920 × 1080”
60i(HQ)
30p(HQ)
24p(HQ)
Item
Setting Value
Page
AE LEVEL
AE LEVEL
Disable
Page 80
Item
Setting Value
Page
V Frequency
Not displayed
Page 84
Scene file
[CINEMA 1080/24p]
Picture file
[CINEMA]