JVC GY-HM710U GY-HM710 ProHD Camcorder 141 page owner's manual (includes GY-HM - Page 63

Dual Rec If both the slots are loaded with recordable cards in the factory default ([Slot Mode] is set to ASeriesB), pressing the [REC] button starts recording only to the media in the selected slot. When the remaining space in the selected media runs out, recording continues by automatically activating the media in the other slot. If both the slots are loaded with recordable cards in the Dual Rec mode ([Slot Mode] is set to ADualB), pressing the [REC] button starts recording simultaneously to the media in both the slots. The clips recorded to the media in both the slots are identical, and backup recording can only be performed on this camera recorder. ( A Page 76 [Slot Mode]) REC Slot Status Indicator [REC] Button [REC] Button Setting to Dual Rec mode 1 Set [Slot Mode] in the [Main Menu] B [Record Set] menu to ADualB. (A Page 76) A ADUALB display appears on the status display screen. ADUALB Display 1280x720 60p HQ OK 00:00:00:00 DUAL A 100min B 100min STBY MAX 123% MIN 45% 282min F5.6 S.DTL B -3 ND1/16 A AE+1 9dB 1/10000 STATUS 1 Screen 2 Start recording ● Load recordable media to both slots, and press the [REC] button. ● In the Dual Rec mode, recording to the media in both slots starts at the same time. ● Both the card slot marks turn red, and the status indicators of both the card slots also light up in red. Lit in red 1280x720 60p HQ OK 00:00:00:00 DUAL A 100min B 100min REC MAX 123% MIN 45% 282min F5.6 S.DTL B -3 ND1/16 A AE+1 9dB 1/10000 STATUS 1 Screen 3 Stop recording ● Press the [REC] button again. ● Recording to both slots stops, and both the card slot marks turn white. ● The same clips are recorded to both cards. White 1280x720 60p HQ OK 00:00:00:00 DUAL A 100min B 100min STBY MAX 123% MIN 45% S.DTL 282min B -3 ND1/16 A F5.6 AE+1 9dB 1/10000 STATUS 1 Screen Memo : ● During recording in the Dual Rec mode, both the card slot marks light up in red. ● During recording in the Dual Rec mode to two cards with a different amount of remaining space, if the space of one card runs out, recording to both slots will stop automatically. After recording stops, recording automatically resumes for the card with remaining space. Although the clips are separated in this case, the clips can be seamlessly joined by arranging them on the timeline of the editing software since they are recorded seamlessly. ● If the last clip on the cards that are loaded to the two slots are different from each other, and the time code operating mode is set to AREGENB, the Regen mode for the selected card slot will be enabled in the next recording. 57