JVC GZ-HM400US Instructions - Page 20

Still Image Recording

Page 20 highlights

Recording Files (Continued) Still Image Recording Slide the mode switch to select # (still image) mode. Press PLAY/REC to select the recording mode. RECORDING/PLAYBACK Press and hold SNAPSHOT halfway. The ? indicator becomes green when the captured image is focused. Press SNAPSHOT fully to take a still image.  To view the last recorded image Select A after shooting. Selecting $ during playback deletes that image.  To change the image quality Change the settings in [IMAGE QUALITY].  To change the image size Change the settings in [IMAGE SIZE].  To record still images continuously Set to [CONTINUOUS SHOOTING] in [SHUTTER MODE].  To change the manual recording mode Select [A/M] twice. NOTE • If the camcorder is not operated for 5 minutes while the power is on, it turns itself off automatically to conserve power. • The sides of still images recorded in 16:9 size may be cut off when printed. Check whether 16:9 size prints can be printed at your local print store. 20 EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

±0
EN
Recording Files
(Continued)
Slide the mode switch to select
#
(still image) mode.
Press PLAY/REC to select the
recording mode.
Press and hold SNAPSHOT
halfway.
The
?
indicator becomes green when
the captured image is focused.
Press SNAPSHOT fully to take a
still image.
NOTE
If the camcorder is not operated for 5
minutes while the power is on, it turns itself
off automatically to conserve power.
The sides of still images recorded in 16:9
size may be cut off when printed. Check
whether 16:9 size prints can be printed at
your local print store.
Still Image Recording
To view the last recorded image
Select
A
after shooting.
Selecting
$
during playback deletes that
image.
To change the image quality
Change the settings in [IMAGE QUALITY].
To change the image size
Change the settings in [IMAGE SIZE].
To record still images continuously
Set to [CONTINUOUS SHOOTING] in
[SHUTTER MODE].
To change the manual recording mode
Select [A/M] twice.
RECORDING/PLAYBACK