JVC HR-XVC37U Instruction Manual - Page 31

EN 31 Index Search Your unit automatically marks index codes at the beginning of each recording. This function gives you quick access to any one of 9 index codes in either direction. NOTE: Before starting, make sure the unit is in the Stop mode. Activate Index Search. Press INDEX (2) or INDEX (6). "INDEX -1" or "INDEX 1" is displayed on the TV screen and search begins in the corresponding direction. ● To access index codes 2 through 9, press INDEX (2) or INDEX (6) repeatedly until the correct index number is displayed. Example: To locate the beginning of B from the current position, press INDEX (2) twice. To locate the beginning of D from the current position, press INDEX (6) once. Current position Index number ● When the specified index code is located, playback begins automatically. Skip Search During playback, press SKIP SEARCH 1 to 6 times to skip over unwanted sections. Each press initiates a 30-second period of fast-motion playback. Normal playback resumes automatically. To resume normal playback during a Skip Search, press PLAY (4). Instant ReView Simply by pressing a single button, the unit power comes on, rewinds, and begins playback of the last timer-recorded program. If you have several programs recorded, you can easily access any of them. NOTE: Before starting, make sure that the unit is off and that the Timer mode is disengaged. Activate Instant ReView. Press . The unit power comes on and the unit searches for the index code indicating the start of the last timer-recorded program. Once it's found, playback begins automatically. ● To watch the first of the 3 programs, press three times. The unit searches and begins playback automatically. You can access a program as far as 9 index codes away from the current tape position.