JVC HR-XVC37U Instruction Manual - Page 45

Still Picture/Frame-By-Frame Playback 1 Pause during playback. Press PAUSE (9). 2 Activate frame-by-frame playback. Press PAUSE (9) to advance a still picture. ● To resume normal playback, press PLAY (4). Slow Motion EN 45 NOTES: ● Resume Function does not work on the Audio CD. It also may not work depending on the discs. ● If you stop the playback of a disc for which an resume point has already been memorized, the memory will be updated with the new resume point. ● When the unit memorizes a resume point, it also remembers audio language, subtitle and angle settings. ● This function may not work for some Video CD or SVCD. ● If the VCR deck is selected during playback, the unit enters Resume Stop mode. When "RESUME" is set to "OFF", the unit starts playback from the beginning of the disc. Zooming During playback, press PAUSE (9), then press REW (3) for reverse slow motion playback, or FF (5) for forward slow motion playback. ● Each press of FF (5) changes the playback speed as follows: 1/32]1/16]1/8]1/4]1/2 ● Each press of REW (3) changes the playback speed as follows (only for DVD VIDEO discs): -1/32]-1/16]-1/8]-1/4]-1/2 ● To resume normal playback, press PLAY (4). NOTES: ● Reverse slow motion playback is possible only with the DVD VIDEO discs. ● This function may not work for some Video CD or SVCD. Press ZOOM during playback or while paused. ● Each press of ZOOM changes the magnification in the following steps: ZOOM OFF ] ZOOM 1 ] ZOOM 2 ] ZOOM 3] ZOOM 4 ] ZOOM 5 ] ZOOM 6 ] (Back to the beginning) ● When a 16:9 aspect picture source is displayed on a 4:3 aspect TV (conventional TV) in Letter Box conversion mode, the margins in black shown on top and bottom of the TV screen will be cropped and both left and right side parts of the picture will also be cropped. You may not move up or down the zoomed-in scene depending on the zooming magnification. ● While zoomed, the picture may look coarse or distorted. Current magnification Resume Function It is possible to memorize positions where you stop playback and resume playback from that position. ● Be sure to set "RESUME" to "ON". (੬ pg. 81) 1 Memorize the resume point. Press STOP (8) during playback. ● "rESuM" appears on the front display panel. Zoomed-in area Press rt w e to move the zoomed-in scene. ● The unit enters Resume Stop mode and memorizes the position where you stop playback as the resume point. ● To clear the resume point: • Press STOP (8) in stop mode. • Press POWER (1) to turn off the unit. • Eject the disc. • Set "RESUME" to "OFF". (੬ pg. 81) 2 Resume playback. Press PLAY (4). The unit starts playback from the resume point.