JVC HR-XVC37U Instruction Manual - Page 71
Digital Audio, Dubbing
View all JVC HR-XVC37U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
EDITING (DVD DECK) Digital Audio Dubbing ● Turn on the TV and select the VCR channel (or AV mode). ● Slide the TV/VCR/DVD switch to the right. Recorder Digital audio device (MD deck etc.) Optical cable (not supplied) Coaxial cable (not supplied) Note for connection: Remove the protection cap from the optical cable. 1 Player Rear of unit DIGITAL AUDIO OUT DIGITAL AUDIO OUT (OPTICAL) (COAXIAL) EN 71 You can dub selected audio from the unit to a digital audio device. However, it is not possible to dub copy-protected discs. Example: Dubbing to an MD A Make connections. Connect the unit and a digital audio device using either an optional optical cable or an optional coaxial cable. B Prepare the unit for dubbing. A Load a disc or a cassette. B Press DVD or VCR and select the audio to be dubbed. C Search for the point where you want to start dubbing by pressing PLAY (4), FF (5) or REW (3) then press STOP (8). D Press REW (3) a little, then press PLAY (4) to start playback. E Press PAUSE (9) to pause playback a little before the start point. C Prepare the digital audio device for dubbing. A Insert an MD. B Select the input mode. D Start dubbing. A Press PLAY (4) to start playback on the unit. B Start recording on the audio device. E End dubbing. Stop recording on the audio device. Then press STOP (8) to stop playback on the unit. NOTES: ● There may be a discrepancy of several seconds between where you intend editing to start, and where it actually starts. ● You can also dub a Video CD or SVCD. Set "DIGITAL AUDIO OUTPUT" to "PCM ONLY". (੬ pg. 79) ● Do not switch between the DVD deck and the VCR deck during dubbing.