JVC KD-DV6200 Instructions - Page 27
General settings - PSM
View all JVC KD-DV6200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
ENGLISH Adjusting the sound 1 2 Adjust the level. General settings - PSM You can change PSM (Preferred Setting Mode) items listed in the table that follows. 1 Enter the PSM settings. FAD*1 (fader) Adjust the front and rear speaker balance. R06 to F06 BAL (balance) Adjust the left and right speaker balance. L06 to R06 LOUD (loudness) Boost low and high frequencies to produce a well-balanced sound at low volume level. LOUD ON or LOUD OFF SUB.W*2 (subwoofer) Adjust subwoofer output level. 00 to 08 VOL.A*3 (volume adjust) Adjust and store auto-adjustment volume level for each source, comparing to the FM volume level. -05 to +05 VOL (volume) Adjust the volume. 00 to 30 (or 50)*4 *1 If you are using a two-speaker system, set the fader level to "00." *2 This takes effect only when a subwoofer is connected. *3 You cannot make an adjustment for FM. "FIX" appears. *4 Depending on the amplifier gain control setting. (See page 29 for details.) 2 Select a PSM item. 3 Select or adjust the selected PSM item. 4 Repeat steps 2 and 3 to adjust other PSM items if necessary. 5 Finish the procedure. Continued on the next page 27 SETTINGS