JVC KW-V320BT Instruction Manual

JVC KW-V320BT Manual

Get JVC KW-V320BT PDF manuals and user guides View all JVC KW-V320BT manuals
Add to My Manuals
Save this manual to your list of manuals

JVC KW-V320BT manual content summary:

  • JVC KW-V320BT | Instruction Manual - Page 1
    INSTRUCTION MANUAL KW-V220BT KW-V120BT This instruction manual is used to describe models listed below. Model availability and features (functions) may differ depending on the country and sales area. t3FHJPO %7%3FHJPO$PEFBSFB t3FHJPO %7%3FHJPO$PEFBSFB © 2015 JVC KENWOOD
  • JVC KW-V320BT | Instruction Manual - Page 2
    of explanation. You can select the indication language from the menu. (Page 57) • Updated information (the latest Instruction Manual, system updates, new functions, etc.) is available from . BEFORE USE IMPORTANT To ensure proper use, please read through this
  • JVC KW-V320BT | Instruction Manual - Page 3
    instruction manual. car... If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit. ❏ How to reset your unit If the unit fails to operate properly, press the reset button. KW-V420BT KW-V320BT KW-V220BT/KW-V120BT
  • JVC KW-V320BT | Instruction Manual - Page 4
    Initial setup When you power on the unit for the first time or reset the unit, the initial setting screen appears. • You can also On the monitor panel: KW-V420BT KW-V320BT KW-V220BT KW-V120BT 2 Display the setting screen. The Home screen is displayed. * Only for KW-V420BT. • You can
  • JVC KW-V320BT | Instruction Manual - Page 5
    manually. (See below.) When selecting : Adjust the hour (1), then adjust the minute (2). • Press [Reset by sudden increase of the output level. KW-V420BT 6 FNC/ button • Pops up . (Press) - The screen switched to depends on the setting (Page 56). • Turns off the screen.
  • JVC KW-V320BT | Instruction Manual - Page 6
    KW-V220BT/KW-V120BT 1 button • Turns on the power. (Press) (Page 7) • Turns off the power. (Hold) (Page 7) • Pops up the short-cut menu. (Press) (Page 11) 2 Reset button Resets screen. (Press) - The screen switched to depends on the setting (Page 56). • Turns off the screen. (Hold
  • JVC KW-V320BT | Instruction Manual - Page 7
    BASICS Common operations ❏ Turning on the power KW-V420BT KW-V320BT KW-V220BT KW-V120BT ❏ Adjusting the volume To adjust the volume (00 to 35) KW-V420BT KW-V320BT KW-V220BT KW-V120BT ❏ Adjusting the panel angle (only for KW-V420BT) 1 Display the screen. On the Home screen: • Press
  • JVC KW-V320BT | Instruction Manual - Page 8
    ❏ Turning on/off the AV source You can activate the AV function by selecting a source on the Home screen. KW-V420BT/KW-V220BT/KW-V120BT 1 On the monitor panel: KW-V420BT KW-V320BT KW-V220BT KW-V120BT (Hold) (Hold) (Hold) To turn on the screen: Press and the hold the same button, or touch the
  • JVC KW-V320BT | Instruction Manual - Page 9
    Displays the source control screen and settings screen. • You can arrange the items to display on the Home screen (Page 52) KW-V420BT/KW-V220BT/KW-V120BT 12 3 45 6 Common operating buttons: 1 Displays all playback sources and items. (Page 10) 2 Displays the screen. (See the right
  • JVC KW-V320BT | Instruction Manual - Page 10
    37) Switches to the App screen from the connected iPod touch/iPhone/ Android device. (Page 23) Wire]. (Page 21) *2 Only for KW-V420BT Region 1/KW-V320BT Region 1/KW-V220BT Region 1/KW-V120BT. *3 Only for KW-V420BT Region 1/KW-V320BT Region 1/KW-V220BT Region 1. *4 Only for KW-V420BT Region 1/KW
  • JVC KW-V320BT | Instruction Manual - Page 11
    control screen, you can jump to the other screen from the pop-up short-cut menu. 1 Display the pop-up short-cut menu. KW-V420BT KW-V320BT KW-V220BT/ KW-V120BT • Only for KW-V320BT: You can also display the pop-up short-cut menu by pressing [FNC] on the source control screen. 2 Select an item
  • JVC KW-V320BT | Instruction Manual - Page 12
    disc with the label side facing up. KW-V420BT ❏ Ejecting a disc KW-V420BT KW-V220BT KW-V120BT KW-V320BT Press [M] on the Home screen or playing back a multi-channel encoded disc, the multi-channel signals are downmixed to stereo. • When removing a disc, pull it horizontally. • You can eject a
  • JVC KW-V320BT | Instruction Manual - Page 13
    display the other operation button window. * The appearance of the buttons differs depending on the model: [ ] or [ ] for KW-V420BT/KW-V220BT/KW-V120BT/[ ] or [ ] for KW-V320BT. For audio playback 1 2 345 6 7 8 Playback information • The information displayed on the screen differs depending
  • JVC KW-V320BT | Instruction Manual - Page 14
    DISCS ❏ Selecting a folder/track on the list 1 2 Select the folder (1), then the item in the selected folder (2). • Repeat the procedure until you select the desired track. • You can change the page to display more items by pressing [ ]/[ ]. • Press [ ] to return to the root folder. • Press [ ] to
  • JVC KW-V320BT | Instruction Manual - Page 15
    [ZOOM] [Aspect] [PictureAdjust] Displays the disc menu. Selects the audio channel (ST: stereo, L: left, R: right). Displays/hides the direct selection buttons. (See the right column.) the buttons differs depending on the model: [ ] for KW-V420BT/KW-V220BT/KW-V120BT/[ ] for KW-V320BT. ENGLISH 15
  • JVC KW-V320BT | Instruction Manual - Page 16
    /or rear speakers. • Dolby Surround: Select this to enjoy multi-channel surround sound by connecting an amplifier compatible with Dolby Surround. • Stereo (initial): Normally select this. Select the monitor type to watch a wide screen picture on the external monitor. 16:9 (Initial
  • JVC KW-V320BT | Instruction Manual - Page 17
    [ ]/[ ]*1 to display the other operation button window. *1 The appearance of the buttons differs depending on the model: [ ] or [ ] for KW-V420BT/KW-V220BT/KW-V120BT/[ ] or [ ] for KW-V320BT. *2 To cancel random or repeat mode, press the button repeatedly until the indicator disappears. *3 You
  • JVC KW-V320BT | Instruction Manual - Page 18
    USB ❏ Settings for USB playback- 1 2 * Select the playback file type when a disc contains different types of files. • Audio: Plays back audio files. • Still Image: Plays back picture files. • Video: Plays back video files. • Audio&Video (initial): Plays back audio files and
  • JVC KW-V320BT | Instruction Manual - Page 19
    install JVC MUSIC PLAY APP" is shown on the Android device. Follow the instructions to install the application. You can also install the latest version of the JVC Music Play application on your Android device before connecting. About JVC Music Play • This unit supports the Android™ application JVC
  • JVC KW-V320BT | Instruction Manual - Page 20
    ]. • Press [ ] to return to the top layer. 2 • Press [ ] to return to the upper layer. Shows/hides artwork of the Android device. • AUTO MODE: Controls from the unit (using the JVC Music Play application). • AUDIO MODE: Controls other media player applications from the
  • JVC KW-V320BT | Instruction Manual - Page 21
    ). - For Lightning connector models: You cannot watch video with KS-U59. ❏ Selecting the connection method of iPod/iPhone 1 2 Display the setting screen. On the Home screen: 3 ❏ Selecting preference settings for iPod/ iPhone playback- 1 2 [USB 1 Wire] [USB+AV-IN] Select
  • JVC KW-V320BT | Instruction Manual - Page 22
    [ ]/[ ]*1 to display the other operation button window. *1 The appearance of the buttons differs depending on the model: [ ] or [ ] for KW-V420BT/KW-V220BT/KW-V120BT/[ ] or [ ] for KW-V320BT. *2 To cancel random mode, press the button repeatedly until the indicator disappears. ❏ Selecting an audio
  • JVC KW-V320BT | Instruction Manual - Page 23
    Android device) and video (for iPod touch/ iPhone) on the stated devices itself, instead of the unit. * [ ] or [ ] for KW-V420BT/KW-V220BT/KW-V120BT/[ ] or [ ] for KW-V320BT. ❏ Switching to the Apps screen while listening to another source (when using iPod/iPhone) t Select [iPhone] for
  • JVC KW-V320BT | Instruction Manual - Page 24
    ® (Only for KW-V420BT Region 1/KW-V320BT Region 1/KW-V220BT Region 1/KW-V120BT) You can stream Pandora from iPod touch/iPhone or Android devices. • Install the latest version of the Pandora application on your iPod touch/iPhone/Android. Preparation 1 Connect the device. • For Android: Connect the
  • JVC KW-V320BT | Instruction Manual - Page 25
    "Pandora" in the Apple iTunes App Store to find and install the most recent version.) • Android™ • Visit Google play and search for "Pandora" to install. • Bluetooth must be built in and the following profiles must be supported Pandora is a third-party service, the specifications are subject to
  • JVC KW-V320BT | Instruction Manual - Page 26
    stations in the memory one after another. • MANU: Manual Search Searches for a station. • The search method differs mode for better FM reception. (Stereo effect will be lost.) • The model: [ ] or [ ] for KW-V420BT/KW-V220BT/KW-V120BT/[ ] or [ ] for KW-V320BT. *2 Only for KW-V420BT/KW-V220BT/KW-V120BT
  • JVC KW-V320BT | Instruction Manual - Page 27
    for each band. Automatic presetting-SSM (Strong-station Sequential Memory) Manual presetting 1 Tune in to a station you want to preset. (Page 26) 2 Select a preset number. ❏ Selecting a preset station For KW-V420BT/KW-V220BT/KW-V120BT: 1 Select the band (1), then display the preset station window
  • JVC KW-V320BT | Instruction Manual - Page 28
    TUNER FM RBDS features ❏ Searching for FM RBDS programs-PTY Search You can search for your favorite programs being broadcast by selecting the PTY code. 1 ❏ Activating/deactivating TI Standby Reception 2 Select a PTY code. (Hold) • You can change the page to display more items by pressing [ ]/[ ].
  • JVC KW-V320BT | Instruction Manual - Page 29
    SiriusXM® Satellite Radio (Only for KW-V420BT Region 1/KW-V320BT Region 1/KW-V220BT Region 1) Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free
  • JVC KW-V320BT | Instruction Manual - Page 30
    to display the other operation button window. *1 The appearance of the buttons differs depending on the model: [ ] or [ ] for KW-V420BT/KW-V220BT/[ ] or [ ] for KW-V320BT. *2 Only for KW-V420BT/KW-V220BT. Presetting channels ❏ Storing channels in the memory You can preset 5 channels for each band
  • JVC KW-V320BT | Instruction Manual - Page 31
    time bar Shows the remaining capacity (black) and the amount of buffered content (red). If the Replay buffer is full, the entire bar becomes blue. • Updated every second. 3 Time code Shows you the point in the Replay buffer you are listening to. • Example: -5:00 - You are listening to audio that is
  • JVC KW-V320BT | Instruction Manual - Page 32
    SiriusXM® Satellite Radio SmartFavorites User stored channels (P1 to P5) of current band are recognized as SmartFavorites channels. SiriusXM Connect Vehicle Tuner automatically buffers their broadcast content in the background. When you select a SmartFavorite channel, you can rewind and replay up to
  • JVC KW-V320BT | Instruction Manual - Page 33
    SiriusXM® Satellite Radio Setting reception restrictions ❏ Setting the parental control You can limit access to SiriusXM channels, such as those with mature content. Setting/Changing the parental code • The initial setting is "0000." • Changing the code does not change the /<
  • JVC KW-V320BT | Instruction Manual - Page 34
    for all skipped channels: Press and hold [All Clear ] in on the screen. ❏ Resetting the SiriusXM Satellite Radio settings You can reset the SiriusXM Satellite Radio settings you set up and restore the default settings. 1 Display the screen
  • JVC KW-V320BT | Instruction Manual - Page 35
    rear view screen is displayed when you shift the gear to the reverse (R) position. To display the picture from the rear view camera manually • Only for KW-V420BT/KW-V220BT/KW-V120BT: You can also display the picture from the rear view camera by selecting [Camera] on the pop-up short-cut menu (Page
  • JVC KW-V320BT | Instruction Manual - Page 36
    Adjusting the parking guidelines Adjust the parking guidelines according to the size of the car, parking space and so on. • Install the rear view camera in the appropriate position according to the instructions supplied with the rear view camera. • When adjusting the parking guidelines, make sure to
  • JVC KW-V320BT | Instruction Manual - Page 37
    selected when is set to [USB+AV-IN]. Be sure to select [USB 1 Wire] for beforehand. (Page 21) 1 Connect an external component to the iPod/AV- an external component via ADS adapter-Maestro (Only for KW-V420BT Region 1/KW-V320BT Region 1) You can control the sources from the
  • JVC KW-V320BT | Instruction Manual - Page 38
    , etc. When you perform these operations, stop your car in a safe place. • Some Bluetooth devices may book Access Profile (PBAP) If your mobile phone supports PBAP, you can display the following items on , it is registered in the unit even if you reset the unit. Up to 10 devices can be registered
  • JVC KW-V320BT | Instruction Manual - Page 39
    , go to step 3. • The PIN code is initially set to "0000". • The maximum number of digits in the PIN code is 15. 4 Select the unit ("Car Multimedia") on your Bluetooth device. • If a PIN code is required, enter "0000" (initial). When pairing is complete, the device is listed on the
  • JVC KW-V320BT | Instruction Manual - Page 40
    (Page 39) 2 3 Select the device you want to connect (1), then press [Connection] (2). : Mobile phone : Audio device : Device for using Apps • The status is shown as follows: - "Connecting": Connection is in progress. - "Connected": A connection has been established. - "Connect Ready": A connection
  • JVC KW-V320BT | Instruction Manual - Page 41
    BLUETOOTH Using a Bluetooth mobile phone ❏ Receiving a call When a call comes in... ❏ Ending a call While talking... ❏ Switching between handsfree mode and phone mode While talking... • Call information is displayed if acquired. • Phone operation is not available while the picture from the rear
  • JVC KW-V320BT | Instruction Manual - Page 42
    the DTMF (Dual Tone Multi Frequency) function. While talking... ❏ Making a call 1 Display the phone control screen. On the Home screen: For KW-V420BT/KW-V220BT/KW-V120BT: * When the mobile phone is not compatible with Phone Book Access Profile (PBAP), the call history and the phone book are not
  • JVC KW-V320BT | Instruction Manual - Page 43
    enter up to 31 numbers. • When iPhone is connected, Siri is activated. • You can also activate voice dialing by holding FNC/ (for KW-V420BT/KW-V220BT/ KW-V120BT) or HOME/ (for KW-V320BT) on the monitor panel. 2 Say the name of the person you want to call. • If the unit cannot find the target, the
  • JVC KW-V320BT | Instruction Manual - Page 44
    button window. *1 Available only for devices compatible with AVRCP 1.3. *2 The appearance of the buttons differs depending on the model: [ ] or [ ] for KW-V420BT/KW-V220BT/KW-V120BT/[ ] or [ ] for KW-V320BT. *3 The random and repeat functions vary depending on the Bluetooth audio device. 44
  • JVC KW-V320BT | Instruction Manual - Page 45
    Shows the device name to be shown on the Bluetooth device - Car Multimedia. the calls automatically. Answer the calls manually. • ON (Initial): Establishes pairing to reset all settings you have made for using Bluetooth mobile phones
  • JVC KW-V320BT | Instruction Manual - Page 46
    Settings for using applications of iPod touch/iPhone/Android Before using applications of iPod touch /iPhone/ Android such as Pandora, select the device to use. 1 Display the screen. On the Home screen: 3 When selecting [Android/Other (Bluetooth)] as the device type: Select the
  • JVC KW-V320BT | Instruction Manual - Page 47
    way speaker system). 1 Turn off the AV source. (Page 8) 2 Display the
  • JVC KW-V320BT | Instruction Manual - Page 48
    size and crossover frequency Preparation: Select the appropriate crossover network mode beforehand. (Page 47) 1 Display the screen. On the Home screen: 2 Select a car type (1), select the location of the speakers (2)*1, then display the screen (3). 3 Select the
  • JVC KW-V320BT | Instruction Manual - Page 49
    SETTINGS ❏ Adjusting the Digital Time Alignment (DTA) Make fine adjustments to the delay time of the speaker output to create a more suitable environment for your vehicle. 1 Display the screen. On the Home screen: 3 Select an item to make an adjustment. [Distance] [Gain] Adjusts
  • JVC KW-V320BT | Instruction Manual - Page 50
    Adjusts the sharpness. (−2 to +2) • You can also display the picture adjustment screen by selecting [Screen Adjustment] (for KW-V420BT/KW-V220BT/KW-V120BT)/[Picture Adjust] (for KW-V320BT) on the pop-up short- cut menu (Page 11). ❏ Changing the aspect ratio You can change the aspect
  • JVC KW-V320BT | Instruction Manual - Page 51
    also display the screen by selecting [User Customize] on the pop-up short-cut menu (Page 11). 2 Only for KW-V420BT/KW-V320BT: Select an item to change (background design: [Background]/panel color: [Panel Color]). • Selecting [Scan] changes the illumination color gradually. *1 Panel
  • JVC KW-V320BT | Instruction Manual - Page 52
    SETTINGS ❏ Making your own color adjustment (only for KW-V420BT/KW-V320BT) 1 Select [Panel Color] on the screen. (Page 51) 2 3 Display the image adjustment screen. 4 Adjust the image. 3 Select the dimmer setting for the
  • JVC KW-V320BT | Instruction Manual - Page 53
    . • The memorized settings are kept even when the unit is reset. 1 Display the screen. On the Home screen Updating the system You can update the system by connecting a USB device containing an update file. • To update the system, visit . 1 Create an update
  • JVC KW-V320BT | Instruction Manual - Page 54
    application. It may take a while. If the update has been completed successfully, "Update Completed" appears. Reset the unit. • Do not disconnect the USB device while updating. • If the update has failed, turn the power off and then on, and retry the update. • Even if you have turned off the power
  • JVC KW-V320BT | Instruction Manual - Page 55
    output balance. • L15 to R15 (Initial: 0) Press [J]/[K]/[H]/[I] or drag [ ] to adjust. • To clear the adjustment, press [Center].
  • JVC KW-V320BT | Instruction Manual - Page 56
    adapter is connected, you can display information about obstacles around the car. - ON: Always displays information. - Dyn. (Initial): Navigation Input>*2 • iPhone: Switches to the screen of App from the connected iPod touch/iPhone by pressing DISP (for KW-V420BT)/ (for KW-V320BT/KW-V220BT/ KW-V120BT
  • JVC KW-V320BT | Instruction Manual - Page 57
    iPod/iPhone. (Page 21) Configure the App settings. (Page 46)
  • JVC KW-V320BT | Instruction Manual - Page 58
    CONTROLLER For KW-V320BT Region 1/KW-V220BT Region 1/ KW-V120BT: To use the remote controller, purchase RM-RK258 separately. ❏ Changing the battery of the remote controller CR2025 (+side) • Use a commercially available button battery (CR2025). • Insert the battery with the + and - poles aligned
  • JVC KW-V320BT | Instruction Manual - Page 59
    screen between the current source and the App screen from the connected iPod touch/iPhone/Android. • Selects the band. • Selects a title/item/folder. • Tuner: - Searches for stations automatically. - Searches for stations manually. (Hold) • SiriusXM Satellite Radio*1 : - Selects a channel. - Selects
  • JVC KW-V320BT | Instruction Manual - Page 60
    wire to a power source with a constant voltage supply, such as with battery wires, the battery may be drained. • Only for KW-V420BT: If the console has a lid, make sure to install fail to work if you share the · wires or ground them to any metal part in the car. • When only two speakers are being
  • JVC KW-V320BT | Instruction Manual - Page 61
    , ignition. 5 Connect the wiring harness connector to the unit. 6 Install the unit in your car. • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip). 7 Reconnect the · battery. 8 Press the reset button. (Page 3) 9 Configure
  • JVC KW-V320BT | Instruction Manual - Page 62
    .) Light blue with yellow stripe (Steering remote control wire) Orange with white stripe (Dimmer control wire) Red (Ignition wire) Yellow (Battery wire) Black (Ground wire) (STEERING WHEEL REMOTE) (ILLUMI) To the OE remote adapter matching your car To car light control switch Ignition key switch
  • JVC KW-V320BT | Instruction Manual - Page 63
    available) ❏ Connecting an Android device Android device (commercially available) ❏ Connecting iPod/iPhone iPod/iPhone (Lightning connector models) (commercially available) iPod/iPhone (30-pin connector models) (commercially available) KW-V220BT KW-V120BT 1.0 m (Front panel) USB
  • JVC KW-V320BT | Instruction Manual - Page 64
    CONNECTION/INSTALLATION ❏ Connecting external components *1 When connecting an external amplifier, connect its ground wire to the chassis of the car; otherwise the unit may be damaged. *2 Only for KW-V420BT Region 1/KW-V320BT Region 1/KW-V220BT Region 1. *3 Only for KW-V420BT Region 1/KW-V320BT
  • JVC KW-V320BT | Instruction Manual - Page 65
    CONNECTION/INSTALLATION Removing the unit (Only for KW-V420BT Region 4/KW-V320BT Region 4/KW-V220BT Region 4) ❏ Removing the trim plate 1 Engage the catch pins on the extraction key (4) and remove the two locks on the lower part. Lower the
  • JVC KW-V320BT | Instruction Manual - Page 66
    following cases: t After starting the heater in the car. t If it becomes very humid inside the car. Should this occur, the unit may malfunction. In for video signals (average) is 8 Mbps. * Only for KW-V420BT Region 4/KW-V320BT Region 4/KW-V220BT Region 4. Playing MPEG1/MPEG2 files t This unit can
  • JVC KW-V320BT | Instruction Manual - Page 67
    (Video format only) discs. "DVD" is selected as the disc type when a +R/+RW disc is loaded. +RW double layer discs are not playable. *4 Only for KW-V420BT Region 4/KW-V320BT Region 4/KW-V220BT Region 4. Continued on the next page... ENGLISH 67
  • JVC KW-V320BT | Instruction Manual - Page 68
    for KW-V420BT Region 1/KW-V320BT Region 1/KW-V220BT Region 1/KW-V120BT. Android t We bear no responsibility for any loss of data in iPod/iPhone, Android this case, disconnect the USB device then reset this unit and the USB device. not leave a USB device in the car, or expose to direct sunlight or high
  • JVC KW-V320BT | Instruction Manual - Page 69
    web site: • For some iPod/iPhone models, the performance may be abnormal or unstable during operation. In this case, disconnect the iPod/iPhone device, then check its condition. If the performance is not improved or slow, reset your iPod/iPhone. • When you turn on this
  • JVC KW-V320BT | Instruction Manual - Page 70
    . "Please update Pandora App": • The Pandora application on your iPod touch/ iPhone/Android is not the latest version. Update the application. "Please check device.": • The Pandora application on your iPod touch/ iPhone/Android is not started up. • The Pandora application is not installed on the
  • JVC KW-V320BT | Instruction Manual - Page 71
    connections. No picture is displayed on the screen. • Turn on the screen. (Page 8) The unit does not work at all. • Reset the unit. (Page 3) The remote controller* does not work. • Replace the battery. * For KW-V320BT Region 1/KW-V220BT Region 1/KW-V120BT: Purchase RM-RK258 separately. ENGLISH 71
  • JVC KW-V320BT | Instruction Manual - Page 72
    JVC Music Play APP is installed on the Android device. • Reconnect the Android device and select the appropriate control mode. • If this does not solve the problem, the connected Android device does not support connection. • Update the firmware version. • Charge the battery. • Reset the iPod/iPhone
  • JVC KW-V320BT | Instruction Manual - Page 73
    iPhone/ Android is not the latest version. Update the application. * Only for KW-V420BT Region 1/KW-V320BT Region 1/KW-V220BT Region 1/KW-V120BT). ❏ be controlled. • Check whether the connected audio player supports AVRCP (Audio Video Remote Control Profile). The Bluetooth device does not detect the
  • JVC KW-V320BT | Instruction Manual - Page 74
    kHz Quantifying Bit Number 16/20/24 bit * Only for KW-V420BT Region 4/KW-V320BT Region 4/KW-V220BT Region 4. ❏ USB interface section USB Standard USB (Audio/Video Remote Control Profile) 1.5 GAP (Generic Access Profile) PBAP (Phonebook Access Profile) 1.2 SDP (Service Discovery Profile) SPP
  • JVC KW-V320BT | Instruction Manual - Page 75
    to Noise Ratio 68 dB (MONO) Selectivity (±400 kHz) ≥ 80 dB Stereo Separation 40 dB (1 kHz) ❏ AM tuner section Frequency Range 530 kHz to Installation Dimensions (W × H × D) KW-V420BT Region 1/KW-V320BT Region 1 KW-V220BT Region 1/KW-V120BT: 178 mm × 100 mm × 162 mm (7-1/16" × 3-15/16" × 6-7/16") KW
  • JVC KW-V320BT | Instruction Manual - Page 76
    marks and logos are trademarks of Sirius XM Radio Inc. All rights reserved. • Android is a trademark of Google Inc. • The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
B5A-0862-00 (KN/RN)
© 2015 JVC KENWOOD Corporation
MONITOR WITH DVD RECEIVER
INSTRUCTION MANUAL
KW-V420BT
KW-V320BT
KW-V220BT
KW-V120BT
This instruction manual is used to describe models listed below. Model availability and features
(functions) may di
ff
er depending on the country and sales area.