JVC KW-V320BT Instruction Manual - Page 64
Connecting external components, Connecting microphone for Bluetooth
View all JVC KW-V320BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
CONNECTION/INSTALLATION ❏ Connecting external components *1 When connecting an external amplifier, connect its ground wire to the chassis of the car; otherwise the unit may be damaged. *2 Only for KW-V420BT Region 1/KW-V320BT Region 1/KW-V220BT Region 1. *3 Only for KW-V420BT Region 1/KW-V320BT Region 1. Connecting external amplifiers for 3 way speakers system ❏ Connecting microphone for Bluetooth Connect the microphone (7) to the MIC terminal. • To install the microphone, peel off the adhesive tape, fix on the installation position, then adjust the direction of the microphone to face the driver. After installing, fix the microphone cable to the car with clamps (commercially available). 1 iPod/AV-IN input • Connect the following type of 4-pole mini plug: 13 1 Left audio 2 Right audio 24 3 Ground 4 Composite video Tweeter preout Mid range preout Woofer preout 2 Video output (Yellow) Speaker 3 Rear preout*1 • Audio left output (White) 7 • Audio right output (Red) 4 Front preout*1 • Audio left output (White) • Audio right output (Red) 5 Subwoofer preout*1 * RCA cable (not supplied) • Subwoofer left output (White) • Subwoofer right output (Red) 6 Expansion port for connecting SiriusXM Connect Vehicle Tuner (commercially available)*2 * When connecting to an external amplifier, connect its ground wire to the car's chassis. 7 iDatalink input for connecting ADS adapter (commercially available)*3 8 Rear view camera input (Yellow) 64