JVC KW-V320BT Instruction Manual - Page 62

CONNECTION/INSTALLATION Connection ❏ Connecting wires to terminals See page 64. 10 A fuse USB terminal (1.0 m): See page 63.*3 *1 Only for KW-V420BT Region 1/KW-V320BT Region 1/ KW-V220BT Region 1. See page 64. *2 Only for KW-V420BT Region 1/KW-V320BT Region 1. *3 Only for KW-V420BT/KW-V320BT. Connect the antenna cord to the *4 For 3 way speaker system connection, see also page 64. antenna terminal. *5 If no connections are made, do not let the cable come out from the tab. 1 See page 64.*1 See page 64.*2 Purple with white stripe (Reverse sensor wire) Light green (Parking sensor wire) White ª / White with black stripe · : To front/mid range speaker (left)*4 Connect to the vehicle's reverse lamp harness when using the optional rear view camera. Connect to the vehicle's parking 3 brake detection switch harness. • For best safety, be sure to connect the parking sensor. Gray ª / Gray with black stripe · : To
front/mid range speaker (right)*4 Green ª / Green with black stripe · : To rear/tweeter speaker (left)*4 Purple ª / Purple with black stripe · : To rear/tweeter speaker (right)*4 *5 Blue (Power antenna wire) (POWER ANTENNA) To automatic antenna if any (250 mA max.) Blue with white stripe (Remote output wire) (REMOTE OUTPUT) To the remote lead of other equipment (200 mA max.) Light blue with yellow stripe (Steering remote control wire) Orange with white stripe (Dimmer control wire) Red (Ignition wire) Yellow (Battery wire) Black (Ground wire) (STEERING WHEEL REMOTE) (ILLUMI) To the OE remote adapter matching your car To car light control switch Ignition key switch To car chassis Fuse box Battery 62