Jabra 6293-829-105 Quick Start Guide - Page 3

To answer and end calls with only the headset: Some phones enable you to answer or end a call by pressing and releasing without having to touch the phone. For all Nextel phone models (except the i1000), the phone's Automatic Answer feature needs to be activated for this headset feature to work. For the BlackBerry 6510, FreeSpeak's Anwer/End feature has to be turned on. To turn on FreeSpeak's Answer/End feature: 1) Ensure that the AC power adapter is not connected. 2) Put the headset in the multi-adapter. 3) Use the stylus to press the stylus switch for about 12 seconds. 4) You will then see a number of blinks (long flashes) on the multi-adapter indicator light which tell you whether this feature is enabled or disabled according to the following table: Number of Blinks 4 5 Answer/End Feature Enabled Disabled Comments -- Default Setting 5) Repeat steps 1-4 to switch between enabled and disabled settings. If you are enabling Answer/End feature for the first time, you should test answering and ending calls to ensure that your phone supports this feature. For more information, see "Enhanced Features" at www.jabra.com/fscs. Calls can be ended by the headset only by waiting for the line to disconnect. STATUS INDICATORS What you see What you hear Status Flashes every second Flashes every 3 seconds When Active Mode starts: quick series of TWO tones - low to high pitch When Standby Mode starts: quick series of TWO tones - high to low pitch Active Mode • Call in progress • Up to 4 hours of talk time Standby Mode • Waiting for call • Up to 100 hours of standby time with mheadset in multi-adapter