Kenmore 7531 Use and Care Guide - Page 16

Inserthewatertubeandwireharness, through, bottomofthedoor., NOTE:Reinstall, theBottomNut., Fig.50,

Get Kenmore 7531 - 22.0 cu. Ft. Top Freezer Refrigerator PDF manuals and user guides View all Kenmore 7531 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

, Inserthewatertubeandwireharnessthroughthe bottomhingepinandinsert hehingepinintothe bottomof thedoor. NOTE:Reinstatlhl e BottomNut. Fig.50 • TightenBolts.Force-fiTt opHingeCoverovertop Hinge. Fig.54 , Place washer between refrigerator door and middle hinge and re-attach Hinge Pin to Hinge Bracket with 1/4in socket wrench. Fig. 51 Bracket • With the refrigerator door fully opened reconnect tube and connectors as described in REPLACE - REFRIGERATOR DOOR. Put freezer door down over the Hinge Pin on the middle Hinge Pin Bracket. Fig. 52 , Replace cover from left side of refrigerator top onto the right of top to cover holes. Cover is also force-fitted. Cover (on top of refrigerator) ..... After changing doors, make sure that the corners of the Door Gaskets are not folded over. To ensure a good seal, apply a small amount of silicon grease on the corners of gaskets. Corners • Place Top Hinge pin in the top of freezer door and line up the Top Hinge with holes in top of refrigerator. , Use the 3 bolts to replace the Hinge. Fig. 53 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
,Inserthewatertubeandwireharness
through
the
bottomhingepinandinserthehingepinintothe
bottomofthedoor.
NOTE:Reinstall
theBottomNut.
Fig.50
•TightenBolts.Force-fit
TopHingeCoverovertop
Hinge.
Fig.54
,
Replace
cover from left side of refrigerator
top onto
the right of top to cover holes. Cover is also
force-fitted.
, Place washer between
refrigerator
door and middle
hinge and re-attach Hinge Pin to Hinge Bracket with
1/4in socket wrench.
Fig. 51
Bracket
• With the refrigerator
door fully opened reconnect
tube and connectors
as described
in REPLACE
-REFRIGERATOR
DOOR.
Put freezer door down over the Hinge Pin on the
middle Hinge Pin Bracket.
Fig. 52
Cover (on top of
refrigerator)
.....
After changing doors, make sure that the corners
of the Door Gaskets
are not folded over.
To ensure a good seal, apply a small amount of silicon
grease on the corners of gaskets.
Corners
• Place Top Hinge pin in the top of freezer door and line
up the Top Hinge with holes in top of refrigerator.
, Use the 3 bolts to replace the Hinge.
Fig. 53
16