Kenwood DDX-512 Instruction Manual

Kenwood DDX-512 - DVD Player With LCD monitor Manual

Get Kenwood DDX-512 - DVD Player With LCD monitor PDF manuals and user guides
UPC - 019048176516
View all Kenwood DDX-512 manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood DDX-512 manual content summary:

  • Kenwood DDX-512 | Instruction Manual - Page 1
    GPS NAVIGATION SYSTEM DNX5120 DNX512EX MONITOR WITH DVD RECEIVER DDX512 DDX5032 INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new GPS Navigation System/DVD Receiver.
  • Kenwood DDX-512 | Instruction Manual - Page 2
    this manual 4 Basic Operations 10 Before Use 6 Notes 7 Navigation Control 14 Using the Navigation System 14 Navigatoin Information Interrupt on the Screen of Other Sources (DNX5120/DNX512EX only) 14 Control of Other Sources While Displaying the Navigation Screen 15 Watching DVD
  • Kenwood DDX-512 | Instruction Manual - Page 3
    Tone Setup 84 Zone Control 84 Remote Controller 86 Battery installation 86 Remote Controller mode switch 86 Common operations (AUD mode) 87 DVD/VCD/CD/Audio files (DVD mode) 88 Radio (AUD mode) 89 NAVI (NAVI mode) 90 DVD Language Codes 91 Help? Troubleshooting 92 Help? Error 94
  • Kenwood DDX-512 | Instruction Manual - Page 4
    in stations in memory one after another. Switches to the next frequency manually. Manual Memory Stores the current receiving station in memory. 1 Select a station you wish to store in memory 2 Store in memory 4 DNX5120/DNX512EX/DDX512/DDX5032 Next page 3 The above operation example with the mark
  • Kenwood DDX-512 | Instruction Manual - Page 5
    English 5
  • Kenwood DDX-512 | Instruction Manual - Page 6
    RW recorder instruction manual.) • If you try to load a 3-inch-disc with its adapter into the unit, the adapter might separate from the disc and damage the unit. Other notes • If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check
  • Kenwood DDX-512 | Instruction Manual - Page 7
    to this unit (DDX512/DDX5032 only) • KNA-G510* • KNA-DV4100 • KNA-DV3100 • KNA-DV2100 * Update the navigation software to the latest version. For how to update the software, refer to the instruction manual of the navigation unit. iPod that can be connected to this unit You can control an
  • Kenwood DDX-512 | Instruction Manual - Page 8
    Notes About Audio files • Playable Audio file AAC-LC (.m4a), MP3 (.mp3), WMA (.wma) ⁄ • If music of normal CD and other playback systems are recorded in the same disc, only the playback system recorded at the first setout is played. • Playable disc media CD-R/RW/ROM, DVD±R/RW • Playable disc
  • Kenwood DDX-512 | Instruction Manual - Page 9
    any DVD player. Indicates the number of audio languages DVD is playing. In this case, the following marks will appear on the screen. For more information, refer to the disc manual. Pr‫ې‬ohࢭibiϚtioʔn MΫark Discs with limited period of use Do not leave discs with a limited period of use in this unit
  • Kenwood DDX-512 | Instruction Manual - Page 10
    adjust the volume. B Switches to the Navigation system Press the button to switch the display to the navigation system screen. E Attenuates the volume Press it Press on the USB control screen to enter the USB suspend mode, and then remove the USB device. See (page 34). ¤
  • Kenwood DDX-512 | Instruction Manual - Page 11
    Control screen. 5 Displays the Audio Control Menu screen. (page 82) 6 Displays the Setup Menu screen. (page 56) 7 Clock display ⁄ 8 • If a Bluetooth Unit , when playing a video disc, select the desired item. ⁄ • See (page 7) for a list of supported discs and formats.
  • Kenwood DDX-512 | Instruction Manual - Page 12
    Free control screen. Press it again for more than 1 second to resume the normal display. Playing an external player Connect an external player such as a digital audio player to to Display Off function. See (page 60) for the function setting of the [NAV] button. 12 DNX5120/DNX512EX
  • Kenwood DDX-512 | Instruction Manual - Page 13
    *DNX5120/DNX512EX only Navigation screen Picture or Video playback screen DVD VIDEO Mode:Full AV - O U T: AV - I N SCRN TI Easy Control button DVD VIDEO Title 1 C h a p 1 T 00:00:05 IN Easy Control button ⁄ • For the functions of Easy Control buttons, see
  • Kenwood DDX-512 | Instruction Manual - Page 14
    NAVIGATION SYSTEM's INSTRUCTION MANUAL for information on using the navigation system. ⁄ • You can set the navigation system function when nothing else is displayed on the screen. If anything else, such as Easy control panel is displayed, erase it first. • For DDX512/DDX5032, an optional navigation
  • Kenwood DDX-512 | Instruction Manual - Page 15
    forwards or fast backwards. During Audio file, Video file, or Picture file play : Selects a file. 4When pressed twice, the disc is played from its beginning when you play it in the next time. (DVD play only) 5 Plays or pauses. 6 When touched this area, the source control screen appears. When "USB
  • Kenwood DDX-512 | Instruction Manual - Page 16
    Button Area Displays the Zoom Control buttons (page 20). e Information Display Button Area ⁄ • The information display is cleared automatically after approximately 5 seconds. Also, the information can be displayed automatically when it is updated. 1 DVD VIDEO Title 2 1 Chap 1 3 T 00:00:05
  • Kenwood DDX-512 | Instruction Manual - Page 17
    or pauses. ⁄ • When the navigation screen is displayed, press the [NAV] button to switch to the source playback screen. • The Easy Control Panel is hidden when you touch a central part of the monitor. DVD VIDEO Mode:Full AV - O U T: AV - I N SCRN TI DVD VIDEO Title 1 C h a p 1 T 00:00:05
  • Kenwood DDX-512 | Instruction Manual - Page 18
    Selects an option from the DVD Disc Menu. 1 Display the Disc Menu Control screen DVD VIDEO Mode:Full AV - O U T: AV - I N DVD VIDEO Title 1 C h a p 1 T 0 0 : 0 0 : 0 5 MenuCtrl 3 3 6 1 5 Top Menu Return 3 4 7 En t e r Highlight 3 2 Canc e l 8 Ex i t 1 Calls the Menu. 2 Returns
  • Kenwood DDX-512 | Instruction Manual - Page 19
    the DVD menu. MenuCtrl Top Menu Return En t e r Highlight Canc e l Ex i t H i g h l i gh t On ⁄ • To cancel Highlight Control, only) e Displays the Zoom Control screen. r Clears the Disc Menu Control. Zoom Control MenuCtrl SUB 3/ 3 Audio 1 / 2 Z o om Angle 1 / 1 Ex i t Z o omC t
  • Kenwood DDX-512 | Instruction Manual - Page 20
    AV - I N DVD VCD PBC Scene VER2 ST 3 IN P 00:05 AF Z o omC t r l 2 2 2 1 Z o om x 2 2 3 Ex i t 1 Changes the zoom ratio at 2 levels (2 times or off ) each time you touch. 2 Scrolls the screen in the direction you touch. 3 Clears the Zoom Control button. 20 DNX5120/DNX512EX/DDX512/DDX5032
  • Kenwood DDX-512 | Instruction Manual - Page 21
    Audio file> (page 8) for playable files. Functions While Displaying the Control Screen Switches to the source control screen to use various playback functions. or [DVD 8 9 11 12 13 14 15 16 17 1 Switches to the wallpaper. 2 Track (Music) Number Display 3 Play Mode Display 4 Play Time Display
  • Kenwood DDX-512 | Instruction Manual - Page 22
    displayed in the Information Display. v Function Indicator 22 DNX5120/DNX512EX/DDX512/DDX5032 b MUSIC, MOVIE or PICTURE indicator n Appears when a disc background is displayed. For information on setting the image display time, see (page 60). . You can search for folders and Audio
  • Kenwood DDX-512 | Instruction Manual - Page 23
    various control screens during playback of video Control Button Area (page 25) MPEG: Not effective 6 Information Display Button Area ⁄ • The information display is cleared automatically after approximately 5 seconds. Also, the information can be displayed automatically when it is updated. or [DVD
  • Kenwood DDX-512 | Instruction Manual - Page 24
    3 Plays or pauses. ⁄ • When the navigation screen is displayed, press the [NAV] button to switch to the source playback screen. • The Easy Control Panel is hidden when you touch a central part of the monitor. DVD MEDIA Mode:Full AV - O U T: AV - I N SCRN TI DVD MEDIA 2 1 P 00:00:05 PICTURE
  • Kenwood DDX-512 | Instruction Manual - Page 25
    (page 60). s You can search for folders and files through a hierarchy. d Displays information of file being played. g Scrolls the list. h Moves to the top hierarchy level. j Moves up a hierarchy level. Picture Control Adjusting the video display. 1 Start Picture Control DVD MEDIA
  • Kenwood DDX-512 | Instruction Manual - Page 26
    Radio Listening Various control screens appear in the Tuner Source mode. • For the basic method of receiver button operations, see (page 10). • Set the remote controller mode switch to "AUD" mode before starting operation, see
  • Kenwood DDX-512 | Instruction Manual - Page 27
    . 20 20 o Memorized stations are displayed. Touch to tune in. ; Scrolls the list. a Switches the list display name to Station name or Program Service Name. The mode is switched in following order each time you touch the button. Display "AUTO1" "AUTO2" "MANU" Setting Tunes in a station with
  • Kenwood DDX-512 | Instruction Manual - Page 28
    Radio Listening Auto Memory Stores stations with good reception in memory automatically. 1 Select a band you wish to store in memory Manual Memory Stores the current receiving station in memory. 1 Select a station if you do not operate within 10 seconds. 28 DNX5120/DNX512EX/DDX512/DDX5032
  • Kenwood DDX-512 | Instruction Manual - Page 29
    See (page 42) for information on how to enter a name. 1 4 End Name set 2 2 1 Selects the Program Service Name, Title & Artist name, Station Name, Radio Text Plus, or Radio Text for text display. When is appeared, the text display is scrolled by pressing it. 2 Scrolls the text
  • Kenwood DDX-512 | Instruction Manual - Page 30
    Radio Listening Traffic Information When a traffic bulletin starts, any source is switched to the traffic information and it is displayed automatically. 1 Set the Traffic information mode Search for Program Type A program is tuned when you set its program type. (Only when receiving receiving
  • Kenwood DDX-512 | Instruction Manual - Page 31
    iPod by connecting an iPod to this unit with KCA-iP300V (optional accessory). You can also display video contents on this unit when connecting an iPod with video. Connecting an iPod Connect an iPod to this unit. Functions When Displaying the Easy Control Panel Displays the basic operation buttons
  • Kenwood DDX-512 | Instruction Manual - Page 32
    control screen to use various playback functions. When Video no playback screen, wallpaper is displalyed. 2 video category. u Displays the previous music/video list screen. i Displays information screen of music/video being played. ⁄ * Disabled when VIDEO is being played. 32 DNX5120/DNX512EX/DDX512
  • Kenwood DDX-512 | Instruction Manual - Page 33
    1 20 20 19 21 22 23 o Categories and music are listed. Touch a category name to move its lower level. If music title is displayed, the music is played by touching it. When is appeared, the text display is scrolled by pressing it. When is appeared, all the music in its category is played by
  • Kenwood DDX-512 | Instruction Manual - Page 34
    playback functions. When Video or picture is playing, press the [FNC] button. USB Mode:Full AV - O U T: AV - I N SCRN TI 1 1 2 USB 0002/0006 1 Selects a file. 2 Plays or pauses. ⁄ P 00:00:05 IN . • The Easy Control Panel is hidden when you touch a central part of the monitor. USB
  • Kenwood DDX-512 | Instruction Manual - Page 35
    initial background is displayed. For information on setting the image display time, see
  • Kenwood DDX-512 | Instruction Manual - Page 36
    USB Device Control Folder Select Searches folders and Audio files stored in the USB device according to hierarchy. 1 Start Folder Select 2 Select music 1 2 3 4 2 5 6 1 Lists folders and Audio files Folder opens when touched, and the Audio file is played. 2 Scrolls the list. 3 Moves to the
  • Kenwood DDX-512 | Instruction Manual - Page 37
    (North American sales area only) Various control screens appear in the Satellite radio source mode. (with the optional accessory Satellite radio connected only. To connect the Sirius tuner, a conversion cable CA-SR20V (optional accessory) is necessary and to connect the XM tuner, an XM interface
  • Kenwood DDX-512 | Instruction Manual - Page 38
    Sirius/XM Control (North American sales area only) Channel Search Specifying the desired category and selecting a channel. 1 Start Channel Search Channel Memory Stores the current receiving channel in memory. 1 Select Artist Name, to Composer Name. (Sirius only) 38 DNX5120/DNX512EX/DDX512/DDX5032
  • Kenwood DDX-512 | Instruction Manual - Page 39
    Direct Channel Search Tuning in by entering the desired channel number. 1 Start Direct Channel Search 2 Enter the channel number 1 2 3 1 Enters the channel number. 2 Cancels the direct channel search. 3 Clears the channel number. 3 Tune in the channel  : Press for # seconds. English 39
  • Kenwood DDX-512 | Instruction Manual - Page 40
    Audio Control When KCA-BT200 (optional accessory) is connected, you can listen to audio files stored in Bluetooth audio player and cell-phone. • You need to register your audio player and cell-phone to your Bluetooth Unit beforehand. Make sure to read the instruction manual of the Bluetooth Unit
  • Kenwood DDX-512 | Instruction Manual - Page 41
    , and system is paused. Phone Call ("CALL") screen When the call ends... Hang up the phone. The system resumes playing automatically. ⁄ • To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to . English
  • Kenwood DDX-512 | Instruction Manual - Page 42
    button. 6 Clears the character. 7 Exits the Character Entry mode and returns to the previous screen. ⁄ • You can enter characters only after you have applied the parking brake. 42 DNX5120/DNX512EX/DDX512/DDX5032
  • Kenwood DDX-512 | Instruction Manual - Page 43
    Control 1 Display Easy Control panel 2 Display the Screen Control screen DVD VIDEO Mode:Full AV - O U T: AV - I N or Off according to the Navigation Day/Night display setting. 7 Returns to the previous screen. ⁄ • The Screen Control screen is displayed only when you have applied the parking
  • Kenwood DDX-512 | Instruction Manual - Page 44
    Various functions can be used in the Hands Free control mode. (with the optional accessory Bluetooth unit connected only) • You need to register your cell-phone to your Bluetooth Unit beforehand. Make sure to read the instruction manual of the Bluetooth Unit as well • To use the Phonebook, it must
  • Kenwood DDX-512 | Instruction Manual - Page 45
    statuses displayed on the control unit may discord from those displayed on the cell-phone. No status is displayed if information about it cannot be obtained. • Setting the cell-phone in the private mode can disable the hands-free function. When Received a Call When you receive a call, you can use
  • Kenwood DDX-512 | Instruction Manual - Page 46
    Hands Free Unit Control Calling by Entering a Phone Number Makes a call by entering a phone number. 1 Display the number input screen Quick number. 2 Creates an SMS for the entered phone number. See (page 55). 3 Clears the number. 4 Returns to the previous screen. 3
  • Kenwood DDX-512 | Instruction Manual - Page 47
    Controlling Tone-based Services Uses tone base service using DTMF (Dual Tone Multi Frequency). 1 Display the DTMF input screen Display the send tones during a call 1 1 Returns to the previous screen. The Initial Input screen appears. 2 Select the Phonebook search method You can search by the
  • Kenwood DDX-512 | Instruction Manual - Page 48
    . See (page 55). y Scrolls the phone number. u Returns to the Name List screen. 5 Make a call ⁄ • To use the Phonebook, it must have been downloaded from the cell-phone. For more details, see the instruction manual of your Bluetooth Unit and your cell-phone. • Initials
  • Kenwood DDX-512 | Instruction Manual - Page 49
    list screen shows the list of the calls originated from or received at this unit. They are not the ones stored in the cell-phone memory Creates an SMS for the selected phone number. See (page 55). 5 Displays the detail of the selected phone number. 6 Returns to the
  • Kenwood DDX-512 | Instruction Manual - Page 50
    Hands Free Unit Control Calling by Voice displayed phone number. 5 Creates an SMS to the displayed address. See (page 55). 6 Selects the Phone number category. 7 Scrolls the phone number. 8 Returns Displays the phonebook list. 50 DNX5120/DNX512EX/DDX512/DDX5032
  • Kenwood DDX-512 | Instruction Manual - Page 51
    Setting Up the Hands-Free Phone The Hands-Free system can be set as follows. 1 Display the Hands Free Setup screen 2 Setup each item (page 54). w Returns to the Hands-Free Control screen. ⁄ • Either the time interval for automatic answer set on this unit or the time interval set on the cell-phone
  • Kenwood DDX-512 | Instruction Manual - Page 52
    Hands Free Unit Control Voice Recognition Registers voice for voice recognition in Phonebook. Up to 35 voices can be recorded in one cell- the voice. 3 Cancels voice registration. Utter within 2 seconds after the Beep. 4 Utter the voice to register (2nd try) 52 DNX5120/DNX512EX/DDX512/DDX5032
  • Kenwood DDX-512 | Instruction Manual - Page 53
    Phone number category by Voice Recognition. 1 Display the Key Word List screen Display the "Hands Free" screen and touch [Setup]. See (page 44). 2 Select the Phone number category to register 1 2 3 4 4 Utter the voice to register (1st try) 7 6 6 Registers the voice
  • Kenwood DDX-512 | Instruction Manual - Page 54
    Unit Control Phone Number Preset Registers frequently used phone number to Hands Free control screen preset button. 1 Display the Hands Free Preset List screen Display the "Hands Free" screen and touch [Setup]. See
  • Kenwood DDX-512 | Instruction Manual - Page 55
    the SMS Select screen 2 Select a function 1 2 3 4 5 1 Displays received message list. 2 Displays sent message list. 3 Displays the Message screen. If Erases the entered character. If pressed more than 1 second, all the input characters are erased. s Returns to the previous screen. English 55
  • Kenwood DDX-512 | Instruction Manual - Page 56
    set up various receiver parameters. Setup Menu Displays the Setup menu to set various functions. 1 Display the control screen of any Audio Setup] and [AV Interface] options can be locked. The key mark ( ) is displayed in reverse video for the locked option. See (page 80). Audio
  • Kenwood DDX-512 | Instruction Manual - Page 57
    the sub woofer phase. (Only when "Subwoofer" is set to "ON" in Audio Setup and "LPF SUB FREQ" is set to other than "Through") 7 Returns to the "Audio Setup" screen. DVD Setup You can set up the DVD play. 1 Display the DVD Setup screen Touch Menu" screen (page 56). in the "Setup 2 Setup each
  • Kenwood DDX-512 | Instruction Manual - Page 58
    screen. 3 Sets the original audio language. (It appears during Audio Language setup.) 4 Sets the language and returns to the "DVD Setup 1" screen. (It appears after you have entered a language code.) 5 Clears the language code. 3 Enter a language code See (page 91) and select
  • Kenwood DDX-512 | Instruction Manual - Page 59
    the setup 6 6 7 6 Selects a parental level. 7 Complete the parental level setup and returns to the "DVD Setup 2" screen. ⁄ • If a disc has higher parental lock level, you need to enter the code number. • The parental lock level varies depending on a loaded disc. • If a disc has no parental lock
  • Kenwood DDX-512 | Instruction Manual - Page 60
    manually. 4 Selects a remote control signal. ( "ON") When turned "OFF", the remote control of TV reception is rejected. 5 Sets a music CD playback. ( "1") "1": Automatically recognizes and plays back an Audio file disc, a DVD DNX5120/DNX512EX/DDX512/DDX5032 r Returns to the "System Setup 3" screen.
  • Kenwood DDX-512 | Instruction Manual - Page 61
    screen  : Press for # seconds. 4 Adjusts the Blue. 5 Returns to the "Panel Color Coordinate" screen. 3 Select a Preset number to register See (page 60). 2 Select a color 1 Adjusted color is registered to the selected Preset button. 4 Complete the color coordination 2 3 1 Sets to
  • Kenwood DDX-512 | Instruction Manual - Page 62
    a navigation system connection. ( "RGB") (DDX512/DDX5032 only) "RGB": Allows the Kenwood's Navigation System to connect via the AV INPUT port. "AV-IN": Allows a third-party navigation system to connect via the AV INPUT port. "Off": Must be used if no navigation system is connected. (The navigation
  • Kenwood DDX-512 | Instruction Manual - Page 63
    volume for voice guidance of the navigation system. ( "21") r Mutes the volume during voice guidance of the navigation system. ( "ON") When turned "ON", the volume level drops for voice guidance. t Sets the guide display method of the Navigation system. ( "ON") (DNX5120/ DNX512EX only) "ON" : Pops
  • Kenwood DDX-512 | Instruction Manual - Page 64
    video playback screen. ( "Auto") "Auto": Information is displayed for 5 seconds when updated. "Manual": Information is displayed when you touch on the screen. 10 11 12 13 p Returns to the "User Interface 2" screen. q Moves to the "User Interface 4" screen. w Sets an on-screen display of the DVD
  • Kenwood DDX-512 | Instruction Manual - Page 65
    Source Button Setup Registers the source displayed in the favorite source screen. 1 Displays the Direct SRC button Setup screen See (page 64). 2 Select a preset button 3 2 3 1 4 1 Selects the preset button to register. 2 Selects the source to register. 3 Scrolls the source
  • Kenwood DDX-512 | Instruction Manual - Page 66
    image to load 2 Display the User Interface screen Touch Menu" screen (page 56). in the "Setup 3 Display the Background Memory screen Background Delete Deletes the background image. 1 Delete the image you is not possible when USB is selected as the source. 66 DNX5120/DNX512EX/DDX512/DDX5032
  • Kenwood DDX-512 | Instruction Manual - Page 67
    56). in the "Setup 2 Start Touch panel setup 2 Select a image for background 2 1 1 Returns to the initial background. 2 Returns to the original screen. 3 Set the image as the background 3 Adjust the Touch panel 1 2 Follow the instruction on the screen and touch the center of . 1 Cancels the
  • Kenwood DDX-512 | Instruction Manual - Page 68
    with the time data sent from the navigation system or the RDS station. (DNX5120/ DNX512EX; DDX512/DDX5032 with KNAG510) Sets the clock time in synchronization with the time data sent from the RDS station. (DDX512/DDX5032 with KNA-DV4100, KNADV3100 or KNA-DV2100) When the synchronized mode is set
  • Kenwood DDX-512 | Instruction Manual - Page 69
    of the VIDEO playback screen. You can select any of the following screen mode. "Full", "Just", "Zoom", "Normal" e Selects a screen mode of the rear view camera (R-CAM) screen. You can select any of the following screen mode. "Full", "Just", "Zoom", "Normal" ⁄ • When you select the Menu or Navigation
  • Kenwood DDX-512 | Instruction Manual - Page 70
    Reset button or if you disconnect your receiver from the battery after the code registration, you need to enter the registered security code. ⁄ • If you have already completed the code registration, is displayed. 3 Enter a security Code Input four-digit number. 70 DNX5120/DNX512EX/DDX512/DDX5032
  • Kenwood DDX-512 | Instruction Manual - Page 71
    a registration of the Security Code You must enter the same security code as that you have entered in Step 3. 2 Enter the security code Now, you can use your Receiver. 3 Enter a security Code Input by four-digit number. 4 Register your security code Now, your security code is cleared. English
  • Kenwood DDX-512 | Instruction Manual - Page 72
    Touch Menu" screen (page 56). in the "Setup 1 2 3 1 Sets the Audio book playback speed. 2 Sets Wide Screen on or off. ⁄ • "Wide Screen" be set while the iPod is connected. 1 Sets the Parental lock code. See (Page 73). 2 Switch the Parental lock function on and off
  • Kenwood DDX-512 | Instruction Manual - Page 73
    Setup Sets a Sirius Parental code. 1 Display the Parental Code screen 4 Confirm the code number Enter the same code number as you input in step 3. ⁄ • If you have already completed the code registration, is displayed. • If you to clear the code which has already registered, press . 2 Enter
  • Kenwood DDX-512 | Instruction Manual - Page 74
    requested to input the code once more. 3 Select a category 1 2 2 3 4 1 Displays all the channels in the selected category. The category name scrolls by pressing . 2 Scrolls the category list. 3 Displays all the channels. 4 Returns to the "SIRIUS Setup" screen. 74 DNX5120/DNX512EX/DDX512/DDX5032
  • Kenwood DDX-512 | Instruction Manual - Page 75
    Setup Registers and selects Bluetooth unit. 1 Display the Bluetooth Setup screen Touch Menu" screen (page 56). in the "Setup 2 Setup each item 1 2 1 Sets cell-phone for Hands Free and Audio player for Bluetooth Audio. 2 Sets the PIN code of the Bluetooth unit to enter when registering
  • Kenwood DDX-512 | Instruction Manual - Page 76
    . 76 DNX5120/DNX512EX/DDX512/DDX5032 4 Enter PIN code Enter the PIN code specified for the Bluetooth unit to register. 12 13 14 15 w Enters a code number. e Cancels registration of PIN code. r Enters PIN code. t Clears the code number. ⁄ • You can also register from the Bluetooth unit side. For the
  • Kenwood DDX-512 | Instruction Manual - Page 77
    Registering Bluetooth Unit PIN Code Sets the PIN code of the Bluetooth unit to enter when registering (pairing) from the cell-phone or audio player side. 1 Display the Receiver PIN Code screen Registering Special Bluetooth Unit Registers Special Bluetooth unit that results in error by normal
  • Kenwood DDX-512 | Instruction Manual - Page 78
    registered Bluetooth unit. 2 Scrolls the name of the Bluetooth unit. 3 Returns to the previous screen. 3 Select the service to use 3 Delete the Bluetooth unit 4 5 6 7 4 Connects/disconnects cell-phone to use for Hands Free. 5 Connects/disconnects Audio player to use for Bluetooth Audio. 6 Deletes
  • Kenwood DDX-512 | Instruction Manual - Page 79
    Software Information Checks the software version of this unit. 1 Display the Software Information screen Touch Menu" screen (page 56). in the "Setup 1 1 Displays the software version. English 79
  • Kenwood DDX-512 | Instruction Manual - Page 80
    Audio Memorize or recall the settings When memorizing the Audio Setup and AV Interface settings: If settings Audio Setup and AV Interface settings. When is selected, you cannot set the Audio Setup Recalls the memorized settings. 4 Memorizes the current Audio Set Up and AV Interface settings. 5
  • Kenwood DDX-512 | Instruction Manual - Page 81
    English 81
  • Kenwood DDX-512 | Instruction Manual - Page 82
    Audio Control Audio Control Menu Displays the Audio Control menu to set the sound effect function of this unit. 1 Display the control screen of any source Touch any source button on the "Source Select" screen. 2 Display the Audio Control menu 3 Select the Audio Control item 1 Audio Control You can
  • Kenwood DDX-512 | Instruction Manual - Page 83
    . 1 Display Equalizer Control Touch in the "Audio Control Menu" screen (page 82). 2 Display the Equalizer screen 1 2 3 1 Selects an equalizer curve type. You can select any of the following equalizer curves. • "Natural" • "Rock" • "Pops" • "Easy" • "Top40" • "Jazz" • "User" ⁄ • "User" can be
  • Kenwood DDX-512 | Instruction Manual - Page 84
    bass center frequency to the low register by approximately 20%. 9 Returns to the "Equalizer" screen. 84 DNX5120/DNX512EX/DDX512/DDX5032 1 1 Displays the current source. 2 Set the Zone Control . - (page 56) and (page 83) are not available. - When "DVD" or "USB
  • Kenwood DDX-512 | Instruction Manual - Page 85
    set to "Front", "DVD" or "USB", the same source screen or control screen is displayed in the rear monitor. See (page 62). English 85
  • Kenwood DDX-512 | Instruction Manual - Page 86
    a selected source or tuner source, etc. DVD mode Switch to this mode when playing DVDs or CDs etc. with the player integrated in this unit. Not used O RETURN CANCEL NAVI mode This is switched when controlling Navigation unit. ⁄ • The position of the remote control mode switch is indicated in the
  • Kenwood DDX-512 | Instruction Manual - Page 87
    O ENTER O DISP V.SEL  POSITION AUD • DVD • • Volume control Adjusts the volume. VIEW MAP DIR  O FM+ the navigation screen. O SRC  MENU ZOOM OUT IN O ENTER O DISP V.SEL  POSITION AUD • DVD • ENTER O O DVD • TV• • NAVI MODE/TOP MENU FNC/MENU/PBC AUDIO RETURN ROUTEM VOICE
  • Kenwood DDX-512 | Instruction Manual - Page 88
    Remote Controller DVD/VCD/CD/Audio files (DVD DVD • TV• CD Track number Play time Cancel Audio SEL  POSITION AUD • DVD • TV• Direct search can be searched directly. DVD Title number Chapter number DVD Top Menu Returns to the DVD top menu. O O ENTER O TV• • NAVI MODE/TOP MENU FNC/MENU/PBC AUDIO
  • Kenwood DDX-512 | Instruction Manual - Page 89
    time you press this key. O ENTER O O DVD • TV• • NAVI MODE/TOP MENU FNC/MENU/PBC AUDIO RETURN ROUTEM VOICE CANCEL AV OUT OPEN SUBTITLE VIEW MAP DIR ANGLE Radio (AUD mode) Band switching Switches to bands received by the unit.  O FM+ D O O O AM−  Y 1 1 2ABC  ANGLE ZOOM 3 DEF
  • Kenwood DDX-512 | Instruction Manual - Page 90
    Remote Controller NAVI (NAVI mode) Joystick Scrolls the map, or moves the cursor.  MENU ZOOM OUT IN  POSITION O ENTER O O AUD • DVD • TV• • NAVI MODE/TOP MENU FNC/MENU/PBC AUDIO AUDIO heading up navigation and north up navigation map displays. O NAVI MODE/TOP MENU FNC/MENU/PBC AUDIO
  • Kenwood DDX-512 | Instruction Manual - Page 91
    (Afan) Oromo Oriya Punjabi Polish Pashto, Pushto Portuguese Quechua Rhaeto-Romance Kirundi Romanian Russian Kinyarwanda Sanskrit Sindhi Sangho Serbo-Croatian Code Language si Singhalese sk Slovak sl Slovenian sm Samoan sn Shona so Somali sq Albanian sr Serbian ss Siswati st
  • Kenwood DDX-512 | Instruction Manual - Page 92
    media. Navigation ? The touch panel control of the navigation system does not work. ✔ Navigation software is not the latest version. ☞ Update the navigation software. For how to update the software, refer to the instruction manual of the navigation unit. 92 DNX5120/DNX512EX/DNX512EX/DDX512/DDX5032
  • Kenwood DDX-512 | Instruction Manual - Page 93
    English 93
  • Kenwood DDX-512 | Instruction Manual - Page 94
    Help? Error When the unit fails to operate correctly, the cause of the failure appears on the display. Protect : Protective circuit has been activated because a speaker cord has shorted or it has come in contact with the car chassis. ➡ Wire or insulate the speaker cord as appropriate and then push
  • Kenwood DDX-512 | Instruction Manual - Page 95
    . Acquring Signal: The unit cannot receive any signal. ➡ Move the vehicle to the area where the unit can receive signal. Updating Firmware: Updating the firmware of Sirius tuner. ➡ Operation is invalid until the update is completed. Updating Channels **% Completed: Updating the Sirius Channel Map
  • Kenwood DDX-512 | Instruction Manual - Page 96
    system Number of Pixels : 336,960 (480H x 234V x RGB) Effective Pixels : 99.99 % Pixel Arrangement : RGB striped arrangement Back Lighting : Cold Cathode Fluorescent Tube DVD player section D/A Converter : 24 bit Audio Decoder : Linear PCM/ Dolby Digital/ dts/ MP3/ WMA/ AAC Video /DDX512/DDX5032
  • Kenwood DDX-512 | Instruction Manual - Page 97
    Video section Color System of External Video Input : NTSC External Video Input Level (mini jack) : 1 Vp-p/ 75 Ω External Audio Max Input Level (mini jack) : 2 V/ 25 kΩ Video Output Level (RCA jacks) : 1 Vp-p/ 75 Ω Audio Output Level (RCA jacks) : 1.2 V/ 10 kΩ Analog RGB input (DDX512/DDX5032 only) :
  • Kenwood DDX-512 | Instruction Manual - Page 98
    trademarks of Apple Inc., registered in the U.S. and other countries. is a trademark of DVD Format/Logo Licensing Corporation registered in the U.S., Japan and other countries. This product incorporates Laboratories. "DTS" and "DTS 2.0 + Digital Out" are trademarks of Digital Theater Systems, Inc.
  • Kenwood DDX-512 | Instruction Manual - Page 99
    : Bottom Panel FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an
  • Kenwood DDX-512 | Instruction Manual - Page 100
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
GPS NAVIGATION SYSTEM
DNX5120
DNX512EX
MONITOR WITH DVD RECEIVER
DDX512
DDX5032
INSTRUCTION MANUAL
©
B64-3971-00/00 (KW/K2W/RW)
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new GPS Navigation System/DVD Receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided
below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model DNX5120/DNX512EX/DDX512/DDX5032
Serial number
US Residence Only
Register Online
Register your Kenwood product at
www.Kenwoodusa.com