Kenwood DDX820WS Instruction Manual - Page 65
Other External Components, View Camera
View all Kenwood DDX820WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Other External Components Other External Components View Camera NOTE • To connect a camera, see Connecting the camera (P.102). • To use a rear view camera, a REVERSE lead connection is required. (P.96) • If [Rear Camera Interruption] is active the camera screen is displayed when you shift the gear to the reverse (R) position. • The camera whose view was displayed last is kept and the same camera view will be displayed the next time. If its assignment setting is changed, the rear camera view is displayed. • Rear/front camera interruption screen is not kept as the camera screen which will be displayed the next time. ÑÑDisplay the camera screen 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [Camera]. 2 Camera off Touch to exit the camera screen. 3 Switching the Guideline *2 Touching each time turns on or off the guideline. 4 Switching the Angle *2 Touching each time changes camera angles. *1 When two or more cameras of rear, front, dashboard, left, and right are connected with this unit. *2 Only when the rear camera screen is displayed and CMOS-3xx series is connected with this unit as the rear camera. ÑÑCamera Setup 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [SETUP]. hhSETUP Menu screen appears. 3 Touch [Camera]. hhView camera screen appears. 3 Adjust each item as follows. 1 3 4 2 1 Camera Switching Keys *1 Touch to switch the view camera. It is necessary to set "Camera Assignment Settings" beforehand except"Rear". See To set up the camera assignment settings (P.66). hhCamera screen appears. 4 Set each item as follows. ■■ Camera Assignment Settings Set up the camera assignment. See To set up the camera assignment settings (P.66). ■■[Rear Camera Interruption] [ON]: Displays the picture from the rear view camera when you shift the gear to the reverse (R) position. [OFF ](Default): Select this when no camera is connected. ■ [Rear Camera Message *]1 [Always display] (Default): Always displays the caution message on the rear camera interruption screen. [Clear after 5 seconds]: Displays the caution message for about 5 seconds on the rear camera interruption screen. English 65