Kenwood DDX820WS Instruction Manual - Page 72
Touch panel adjustment, Adjust the date and time, manually, Learning function of steering, remote
View all Kenwood DDX820WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Setup ÑÑTouch panel adjustment 1 Touch [Touch Panel Adjust] on the User Interface screen. hhTouch Panel Adjust screen appears. 2 Follow the instruction on the screen and long touch the center of each [ ]. 2 1 NOTE • To cancel the touch panel adjustment, touch [Cancel]. • To reset it to the default, touch [Reset]. ÑÑAdjust the date and time manually 1 Touch [Clock] on the User Interface screen. 2 Select [Manual]. 3 Touch [Time Zone] on the User Interface screen. 4 Select the time zone. 5 Touch [Clock Adjust] on the User Interface screen. 6 Adjust the date, then adjust the time. ÑÑLearning function of steering remote This function is available only when your vehicle is equipped with the electrical steering remote controller. If your steering remote controller is not compliant, learning may not be completed and error message may appear. 1 Touch [Steering Remote Controller] in the User Interface screen. hhSteering Remote Controller Setting screen appears. 2 Press and hold the steering remote controller button. NOTE • You can have the unit learned all buttons at a time. In that case, press all buttons one at a time and after pressing all of them, touch [Learning completed] in Steering Remote Controller Setting screen. However, new functions cannot be learned after this operation. 3 Touch the function you want to set. 4 Repeat steps 2 and 3 as necessary. 7 Touch [Set]. 72