Kenwood DPX503 Instruction Manual - Page 23
Audio Setup, Speaker Setting
UPC - 019048180032
View all Kenwood DPX503 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Audio Setup You can set Sound system , such as follows; Adjustment Item Display Front High Pass Filter* "HPF-F" Rear High Pass Filter* "HPF-R" Low Pass Filter* "LPF" Subwoofer Phase* Volume offset Loudness* Dual Zone System "SW PHASE" "VOL-OFFSET" "LOUD" "2 ZONE" Range Through/40/60/80/100/120/ 150/180/220 Hz Through/40/60/80/100/120/ 150/180/220 Hz 50/60/80/100/120/Through Hz Reverse (180°)/ Normal (0°) -8 - ±0 (AUX: -8- +8) OFF/ON OFF/ON *Function of DPX303. ⁄ • Volume offset: Sets each source's volume as a difference from the basic volume. • Loudness: Compensates for low and high tones during low volume. (Only the low tone is compensated for when the tuner is selected as a source.) • Dual Zone System Main source and sub source (Auxiliary input) output Front channel and Rear channel separately. - Set up the channel of sub source by "Zone2" of (page 6). - Select Main source by [SRC] button. - Adjust the volume of Front channel by [AUD] knob. - Adjust the volume of Rear channel by (page 22) or [5]/[∞] button on the remote control (page 27). - The Audio Control has no effect on sub source. 1 Select the source to adjust For how to select source item, refer to of (page 4). 2 Enter Audio Setup mode Press the [AUD] knob for at least 1 second. 3 Select the Audio Setup item to adjust Press the [AUD] knob. 4 Adjust the Audio setup item Turn the [AUD] knob. 5 Exit Audio Setup mode Press the [AUD] knob for at least 1 second. Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type as follows; Speaker type OFF For 5 & 4 in. speaker For 6 & 6x9 in. speaker For the OEM speaker Display "OFF" "5/4inch" "6x9/6inch" "O.E.M." 1 Enter Standby Select the "STANDBY" display. For how to select source item, refer to of (page 4). 2 Enter Speaker Setting mode Press the [AUD] knob. "SP SEL" is displayed. 3 Select the Speaker type Turn the [AUD] knob. 4 Exit Speaker Setting mode Press the [AUD] knob. English | 23