Kenwood DRV-830 Operation Manual - Page 17

Configuring the Settings MENU * Factory default settings Playback Continuous REC (Slot 1) Continuous REC (Slot 2) Select the folder and play the desired file. (➜ P. 26) It is also possible to protect or delete the file during file playback. (➜ P. 28) Manual REC Event REC Parking REC Still images Parking recording settings To use the parking recording function, the power must be connected with the CA-DR100 (optional accessory). (➜ P. 14) Recording time Overwrite Detecting sensitivity Exit time after ACC OFF Entry time before ACC ON OFF (parking recording not performed)/10 sec*/20 sec /30 sec Set the time for recording after an impact is detected. ON*/OFF Set whether or not to overwrite old files after the maximum number of recording files has been reached. 1 (Low Sensitivity)/2/3*/4/5 (High Sensitivity) Set the sensitivity for detection of impacts to the parked vehicle. OFF*/30 sec/1 min/3 min Set the time for which parking recording will be disabled after the engine key is turned off. OFF*/30 sec/1 min/3 min Set the time for which parking recording will be disabled before the engine key is turned on. * Factory default settings Recording settings Audio recording ON*/OFF Set whether or not to record the sound from the microphone when recording. Continuous recording file 1 min*/3 min/5 min length Set the recording time for continuous recording. The recordings are split according to the recording time set here. For low frame rate recordings, the file length is 10 minutes, regardless of the value set here. Manual recording time 15 sec*/30 sec/1 min Set the time for recording after manual recording is started. The recording time before the [REC] button is set is fixed to 10 seconds. Event recording time 15 sec.*/30 sec./1 min. Set the time for recording after an impact is detected. The recording time before an impact to the vehicle is detected is fixed to 10 seconds. Overwrite (manual) ON/OFF* Set whether or not to overwrite old files after the maximum number of recording files has been reached. Overwrite (event) ON/OFF* Set whether or not to overwrite old files after the maximum number of recording files has been reached. Resolution 2560×1440 (HDR)/2304×1296 (HDR) /1920×1080 (HDR)*/1280×720 (HDR) Sets the resolution for recording. Recording mode Normal*/Low frame rate Select a recording mode. Selecting low frame rate recording increases the recording time to more than usual. Low frame rate 9 fps*/3 fps Set the image update frequency during low frame rate recording. The smaller the value, the longer the recording time. Detecting sensitivity (event) 1 (Low Sensitivity) /2/3*/4/5 (High Sensitivity) Set the sensitivity for detecting impacts to the vehicle. Automatic still image capture Capture interval 1 min./5 min.*/15 min./30 min. Set the interval for capturing images with the automatic still image capture function. Number of captured images 10/30*/50 Set the number of images to be captured with the automatic still image capture function. Information stamps ON*/OFF Set whether or not to record subtitles (date and time, position information, etc.). 32 33