Kenwood DVT-6200 User Manual - Page 29
To set the LISTEN mode manually, Description of Dolby Pro Logic II: Music mode
View all Kenwood DVT-6200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Preparations Setting SupetLUISpTfEuNncmtiodnes 29 DVT-6200 (EN/K,E,X) To set the LISTEN mode manually According to the contents of the disc played in this unit, the LISTEN MODE (selected by the LISTEN MODE key) can be found in the following table SOURCE LISTEN MODE DISC DOLBY DOLBY DIGITAL DIGITAL (5.1ch) (2ch) DTS Input VCD/CD CABLE/SAT/VCR (PCM, MP3) (ANALOG) DOLBY DIGITAL DTS DOLBY PRO LOGIC II DOLBY PRO LOGIC STEREO At the time of DTS or DOLBY DIGITAL (5.1 ch) source Press the LISTEN MODE key. MAIN UNIT REMOTE Each press switches the modes as shown below. (At the time of DTS source) 1 DTS 2 STEREO (At the time of DOLBY DIGITAL (5.1 ch) source) 1 DOLBY D (DIGITAL) 2 STEREO At the time of PCM or DOLBY DIGITAL (2 ch) source 1 Press the LISTEN MODE key. MAIN UNIT REMOTE Each press switches the modes as shown below. 1 PRO LOGIC (DOLBY PRO LOGIC) ( PL II MOVIE or PL II MUSIC) 2 STEREO 2 When the TRIM (5/∞) keys on the remote or the SKIP (4/¢) keys on the main unit are pressed at a time other than display of STEREO, PRO LOGIC, PL II MOVIE, or PL II MUSIC is switched. MAIN UNIT REMOTE Each press switches the modes as shown below. 1 PRO LOGIC (DOLBY PRO LOGIC) 2 PL II MOVIE 2 PL II MUSIC When the SET UP key is pressed at the time of PL II MUSIC, switching of Panorama mode, Dimension, and Center Width is possible. Description of Dolby Pro Logic II: Music mode Panorama mode : Expands the image of front-channel stereo to the surround speakers to create a sound environment that fills your surroundings. (To change the Panorama mode, press SET UP key at the time of Dolby Pro Logic II Music mode. Display the PANOR OFF or ON, then press the TRIM (5/∞) keys to select on or off.) Dimension : This controls the balance between the Front and Rear in 2 steps on the front and 2 steps on the rear. Set this parameter to one of the Front steps if the surround effect is too strong, or to one of the Back steps if it is too weak. (To change the Dimension, press SET UP key twice at the time of Dolby Pro Logic II Music mode. Display the DIMEN 0 (or other value), then press the TRIM (5/∞) keys to select F-2, F-3, R-2 or R-3.) Center Width : The center channel signal can be divided and distributed to the Front L/R channels. The adjustment for distributing the center channel signal to the front channels can be applied in eight steps from 0 to 7. Use this adjustment when the center image seems to be too strong. (To change the Center Width, press SET UP key 3 times at the time of Dolby Pro Logic II Music mode. Display the C-WIDTH 0 (or other value), then press the TRIM (5/∞) keys to select 0 ~7.)