Kenwood K-8302 Operation Manual

Kenwood K-8302 Manual

Get Kenwood K-8302 PDF manuals and user guides View all Kenwood K-8302 manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood K-8302 manual content summary:

  • Kenwood K-8302 | Operation Manual - Page 1
    INSTRUCTION MANUAL VHF FM TRANSCEIVER/ UHF FM TRANSCEIVER TK-7302/ TK-8302 © B62-2168-20 (C) 09 08 07 06 05 04 03 02
  • Kenwood K-8302 | Operation Manual - Page 2
  • Kenwood K-8302 | Operation Manual - Page 3
    are grateful you have chosen Kenwood for your personal mobile applications. This instruction manual covers only the basic operations etc.) Turn OFF your transceiver while taking on fuel or while parked in gasoline service stations. Do not carry spare fuel containers in the trunk of your vehicle if
  • Kenwood K-8302 | Operation Manual - Page 4
    of the vehicle before installing the transceiver. ◆ Use only the supplied DC power cable or a Kenwood optional DC power cable. ◆ Do not cut and/or remove the fuse holder on the DC power cable. For passenger safety, install the transceiver securely using the supplied mounting bracket and screw
  • Kenwood K-8302 | Operation Manual - Page 5
    : The following instructions are for use by your Kenwood dealer, an authorized Kenwood service facility, or the cable (with fuses 1 • 10 A fuse 4 Mounting Bracket 1 Screw set • 5 x 16 mm self-tapping screw 4 • Hex-headed screw with washer 4 • Spring washer 4 • Flat washer 4 Instruction manual
  • Kenwood K-8302 | Operation Manual - Page 6
    hex-headed screws. 4 Mount an optional microphone hanger in a location where it will be within easy reach of the user. • The microphone and microphone cable should be mounted in a place where they will not interfere with the safe operation of the vehicle. When replacing the fuse in the DC power
  • Kenwood K-8302 | Operation Manual - Page 7
    jack Insert the microphone plug into this jack. ᶉ Status Indicator Lights during a specified mode, based on dealer programming. ᶊ S / A / / keys Press to activate their programmable functions {page 4}. to this jack. ᶐ Power input connector Connect the DC Power Cable to this connector. 3
  • Kenwood K-8302 | Operation Manual - Page 8
    display shows the channel number and the 2 dots show various modes of operation. The left and right dots on the display can be programmed to indicate specific modes of operation, as listed below. • AUX • Scan Delete/Add • External Speaker • Scrambler • Horn Alert • Talk Around • Lone Worker
  • Kenwood K-8302 | Operation Manual - Page 9
    THE VOLUME Press the Volume Up key to increase the volume. Press the Volume Down key to decrease the volume. If Squelch Off has been programmed onto a key, you can use that function to listen to background noise while adjusting the volume level. SELECTING A ZONE AND CHANNEL Select the desired zone
  • Kenwood K-8302 | Operation Manual - Page 10
    the scanning sequence. PRIORITY SCAN If a Priority channel has been programmed, the transceiver will automatically change to the Priority channel when a list. 1 Select your desired zone and/or channel. 2 Press the key programmed as Scan Delete/Add to remove a channel or press and hold the key for
  • Kenwood K-8302 | Operation Manual - Page 11
    DTMF calls, you must use an optional microphone with a DTMF keypad. MANUAL DIALING 1 Press and hold the PTT switch. 2 Enter the desired (1 ~ 9). 3 Press the PTT switch to make the call. REDIALING 1 Press the key programmed as Autodial or the microphone key. • "Ad" appears on the display. 2 Press the
  • Kenwood K-8302 | Operation Manual - Page 12
    are using the same channel. OPTIONAL SIGNALING Your dealer may also program several types of optional signaling for your transceiver channels. 2-tone is an Alphanumeric 2-way Paging Function and is a protocol owned by JVC KENWOOD Corporation. Note: If set up by your dealer, your transceiver may
  • Kenwood K-8302 | Operation Manual - Page 13
    as Paging Call for 1 second to transmit your PTT List ID, to request a call. STATUS MESSAGE You can transmit pre-programmed status messages by pressing the keys programmed as Status 1 and Status 2. Status messages are 2-digit codes ranging from 10 to 99 (80 ~ 99 are reserved for special messages
  • Kenwood K-8302 | Operation Manual - Page 14
    the display while Lone Worker is activated. TALK AROUND During interruptions in service (such as a power failure), you can continue to communicate by using away or there are no geographical obstacles in the way. Press the key programmed as Talk Around to toggle the Talk Around function ON or OFF. •
  • Kenwood K-8302 | Operation Manual - Page 15
    their transceivers. The scrambler function will not work with transceivers set up with different scrambler codes. MONITOR/ SQUELCH OFF You can use the key programmed as Monitor or Squelch Off to listen to weak signals that you cannot hear during normal operation and to adjust the volume when no
  • Kenwood K-8302 | Operation Manual - Page 16
    . PTT ID PTT ID is the transceiver unique ID code which is sent each time the PTT switch is pressed and/or released. COMPANDER If programmed by your dealer for a channel, the compander will remove excessive noise from transmitted signals, to provide higher clarity of signals. VOICE ANNOUNCEMENT When
  • Kenwood K-8302 | Operation Manual - Page 17
    VHF UHF TK-7302/ TK-8302
  • Kenwood K-8302 | Operation Manual - Page 18
  • Kenwood K-8302 | Operation Manual - Page 19
    鸣谢 䄺ਞ 150 固件版权 保留 KENWOOD i
  • Kenwood K-8302 | Operation Manual - Page 20
    注意事项 12V 目录 1 3 5 扫描 ...6 DTMF 7 信令 ...8 FleetSync 8 9 11 ii
  • Kenwood K-8302 | Operation Manual - Page 21
    开始使用 随机附件 1 • 10 A 4 1 5 x 16 mm 4 4 4 4 1 准备工作 12V 1 2 3 4 1
  • Kenwood K-8302 | Operation Manual - Page 22
    䄺ਞ 1 4.2 mm 2 3 4 ⊼ᛣ M4 x 6 mm 平垫 弹簧垫 5 x 16 mm 安装支架 保险丝 12V 2
  • Kenwood K-8302 | Operation Manual - Page 23
    :@ . ; 熟悉本机    ACC. = B> 2 8   a b 4页}。 c 4页。 d 4页}。 e f g h S / A /
  • Kenwood K-8302 | Operation Manual - Page 24
    显示屏 • 辅助 OST S、A、
  • Kenwood K-8302 | Operation Manual - Page 25
    基本操作 PS 1 3。 2 按C A A 1和2 3 按S 音量调节 G1"（区域1）字样。 1 2 PTT PTT 3～4 5
  • Kenwood K-8302 | Operation Manual - Page 26
    扫描 Sc 2个信道。 优先扫描 P 1 2 1 cA cd"字样。 GA Gd"字样。 扫描返回 PTT 6
  • Kenwood K-8302 | Operation Manual - Page 27
    DTMF呼叫 DTMF DTMF 手动拨号 1 按住PTT开关。 2 PTT PTT 自动拨号 DTMF号码。 1 Ad"字样。 2 1～9)。 3 按下PTT 重拨 1 Ad"字样。 2 0 rd 3 按下PTT 遥毙 St"字样。 7
  • Kenwood K-8302 | Operation Manual - Page 28
    信令 亚音频(QT DQT) QT或DQT QT亚音/DQT 可选信令 2 2 2 DTMF DTMF DTMF FleetSync 9 MDC-1200： MDC-1200 AFSK 1200，采用1200 Hz和1800 Hz OST) 16对OST。 1 2 ot OST编号。 3 按
  • Kenwood K-8302 | Operation Manual - Page 29
    LED PTT 3位队号和4位ID ID号。 注：ID 寻呼 1 2 1 PTT列表ID 状态信息 1和状态2 2 10到79 dt Ed"字 Er"字样。 GPS报告 GPS装置（NMEA-0183 GPS 高级操作 紧急呼叫 1 2 1 1 1 2 2 2 3 9
  • Kenwood K-8302 | Operation Manual - Page 30
    2 Ln"字样。 脱网通信 tA"字样。 Sr"字样。 1 2秒钟。 co 2 按
  • Kenwood K-8302 | Operation Manual - Page 31
    1 SL 2 按
  • Kenwood K-8302 | Operation Manual - Page 32
    BCL) BCL PTT ID PTT ID ID PTT 压扩器 语音指导 12
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
INSTRUCTION MANUAL
VHF FM TRANSCEIVER/ UHF FM TRANSCEIVER
TK-7302/ TK-8302
© B62-2168-20 (C)
09 08 07 06 05 04 03 02