Kenwood K-8302 Operation Manual - Page 7

GETTING ACQUAINTED FRONT/REAR PANEL :@ . ;    ACC. = B> 2 8   ᶃ (Power) switch Press to switch the transceiver ON or OFF. ᶄ / keys Press to activate their programmable functions {page 4}. ᶅ Display Refer to page 4. ᶆ / keys Press to activate their programmable functions {page 4}. ᶇ TX/RX Indicator Lights red while transmitting. Lights green while receiving a signal. Flashes orange when receiving an optional signaling call. ᶈ Microphone jack Insert the microphone plug into this jack. ᶉ Status Indicator Lights during a specified mode, based on dealer programming. ᶊ S / A / / keys Press to activate their programmable functions {page 4}. ᶋ Speaker Internal speaker. ᶌ PTT switch Press this switch, then speak into the microphone to call a station. ᶍ Antenna connector Connect the antenna to this connector. ᶎ ACC connector Connect the ACC to this connector, via the KCT-60. ᶏ External speaker jack Connect an external speaker to this jack. ᶐ Power input connector Connect the DC Power Cable to this connector. 3