Kenwood KDC-148 Instruction Manual - Page 4
Basic operations - stereo
UPC - 019048190963
View all Kenwood KDC-148 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Basic operations Loading slot Remote sensor Do not expose to bright sunlight. Display window Ejects the disc Volume knob Detaches the faceplate Auxiliary input jack The following indicator lights up when... ST: A stereo broadcast is received (FM). IN: A disc is in the unit. Maintenance Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to observe this precaution may result in damage to the monitor or unit. Cleaning the connector: Wipe off dirt on the connector of the unit and faceplate. Use a cotton swab or cloth. Handling discs Do not touch the recording surface of the disc. Do not stick tape etc. on the disc, or use a disc with tape stuck on it. Do not use any accessories for the disc. Clean from the center of the disc and move outward. Clean the disc with a dry silicon or soft cloth. Do not use any solvents. When removing discs from this unit, pull them out horizontally. Remove the rims from the center hole and disc edge before inserting a disc. 4