Kenwood KDC-165U North America - Page 19

Wiring connection IMPORTANT : We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer. Antenna terminal / : Front output Rear/ subwoofer output / / / : Rear/ subwoofer output Fuse (10 A) When connecting to an external amplifier, connect its ground wire to the car's chassis to avoid damaging the unit. Part list for installation (A) Faceplate (B) Trim plate (C) Mounting sleeve To front speaker (left) To front speaker (right) To rear speaker (left) To rear speaker (right) Ignition switch Car fuse box White White/Black Gray Gray/Black Green Green/Black Purple Purple/Black Red (Ignition wire) Car fuse box Yellow (Battery wire) Black (Ground wire) If no connections are made, do not let the wire come out from the tab. Brown (Mute control wire) To the terminal that is grounded when the telephone rings or during conversation ( 15) (To connect the Kenwood navigation system, refer your navigation manual.) Blue/White (Power control wire/ Antenna control wire) To the power control terminal when using the optional power amplifier or to the antenna control terminal in the vehicle Light blue/yellow (Steering remote control wire) To the steering wheel remote control adapter (D) Wiring harness (E) Extraction key (F) Screws (supplied for / ) Battery To the metallic body or chassis of the car ENGLISH 19