Kenwood KDC-248U Owners Manual - Page 12

Listening to the other external components Preparation: Make sure [ON1] or [ON2] is selected for [BUilTIN AUX). (page 6) lE~~~ 1 Press SRC to select IIAUX." 2 Turn on the external component and start playing. 3 Turn the volume knob to adjust the Auxiliary input jack volume. Portable audio device (optional accessory) 3.5 mm (3/16") stereo mini plug (optional accessory) r 1 Maintenance I Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to observe this precaution may result in damage to the monitor or unit. ! ICleaning the connector: Wipe off dirt on the connector of the unit and faceplate. Use a I cotton swab or cloth. I i Handling discs - Do not touch the recording surface of the disc. - Do not stick tape etc. on the disc, or use a disc with tape stuck on it. - Do not use any accessories for the disc. I - Clean from the center of the disc and move outward. - Clean the disc with a dry silicon or soft cloth. Do not use any solvents. II - When removing discs from this unit, pull them out horizontally. I- Remove the rims from the center hole and disc edge before inserting a disc. I 12