Kenwood KDC-BT848U Instruction Manual - Page 19
Tuner setting, Direct access tuning, Desired frequency, Press button, Display, Overview
UPC - 019048193179
View all Kenwood KDC-BT848U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Tuner setting Sets the tuner items. 1 Select Tuner source Press the [SRC] button. Select the "TUNER" display. 2 Enter Function setting mode Press the Control knob for at least 1 second. 3 Select the Setting mode Turn the Control knob to select "Settings", and then press the Control knob. 4 Select the desired Tuner setting item Turn the Control knob to select Tuner setting item, and then press the Control knob. Display "Settings" "MONO" "TI" Overview You can reduce the noise when stereo broadcasts are received as monaural. "ON" / "OFF" Switches to the traffic information automatically when the traffic bulletin starts "ON" / "OFF" ( : Factory setting) 5 Set the Tuner setting item Turn the Control knob to select desired value, and then press the Control knob. The previous item is displayed. 6 Exit Function setting mode Press the [ ] button for at least 1 second. Function of remote control Direct access tuning Entering the frequency and tuning. 1 Enter Direct access tuning mode Press the [DIRECT] button on the remote control. "- - - -" is displayed. 2 Enter the frequency Press the number buttons on the remote control. Example: Desired frequency 92.1 MHz (FM) 810 kHz (AM) Press button [9], [2], [1] [8], [1], [0] 3 Search the frequency Press the [4] or [¢] button on the remote control. Cancelling Direct access tuning Press the [ ] button on the remote control. English | 19