Kenwood KDC MP638U Instruction Manual - Page 36
Mounting the USB Bracket
UPC - 019048177964
View all Kenwood KDC MP638U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Installation/Removing the Unit Accessory of KDC-X792/X692 Mounting the USB Bracket 1 Make an opening to mount the bracket. 2 Pass the USB connector through the opening. 3 Fit the USB connector in the bracket, and secure it with a band. Accessory5 Accessory6 4 Mount the assembled bracket using screws. Accessory7 (Ø3 × 12 mm) ¤ • Do not set the unit in hot places such as on the dashboard. • Do not install near the dashboard, rear tray, or air bag safety parts. • Install the unit in the place where it will not prevent you from driving your vehicle properly. 36 | KDC-X792/KDC-X692/KDC-MP738U/KDC-MP638U
36
|
KDC-X792/KDC-X692/KDC-MP738U/KDC-MP638U
Installation/Removing the Unit
Accessory of KDC-X792/X692
Mounting the USB Bracket
1
Make an opening to mount the bracket.
2
Pass the USB connector through the opening.
3
Fit the USB connector in the bracket, and secure it
with a band.
Accessory
5
Accessory
6
4
Mount the assembled bracket using screws.
Accessory
7
(Ø3 × 12 mm)
¤
• Do not set the unit in hot places such as on the dashboard.
• Do not install near the dashboard, rear tray, or air bag safety
parts.
• Install the unit in the place where it will not prevent you
from driving your vehicle properly.