Kenwood NX-3220 User Manual 5 - Page 27
Basic Operations, Switching Power On/ Off, Adjusting The Volume, Selecting A Zone And Channel
View all Kenwood NX-3220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
BASIC OPERATIONS SWITCHING POWER ON/ OFF Turn the Power switch/ Volume control clockwise to switch the transceiver power ON. Turn the Power switch/ Volume control counterclockwise to switch the transceiver power OFF. ADJUSTING THE VOLUME Rotate the Power switch/ Volume control to adjust the volume. SELECTING A ZONE AND CHANNEL 1 Select the desired zone using the Selector, 4-way D-pad or the buttons programmed as [Zone Up]/ [Zone Down]. Each zone contains a group of channels. 2 Select the desired channel using the Selector, 4-way Dpad or the buttons programmed as [Channel Up]/ [Channel Down]. Each channel is programmed with settings for transmitting and receiving. ● The default setting for the Selector is [Channel Select]. ● The transceiver may have names programmed for zones and channels. The zone name and channel name can contain up to 12 and 14 characters respectively. While selecting a zone, the zone name will appear above the channel name. ● If programmed by your dealer, your transceiver will announce the zone and channel numbers as you change them. 25