Kenwood NX-3220 User Manual 5 - Page 28
TRANSMITTING, RECEIVING, Selector, way D-pad, Zone Up], Zone Down], Channel, Channel Down]
View all Kenwood NX-3220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
TRANSMITTING 1 Select the desired zone and channel using the Selector or 4way D-pad and the [Zone Up]/ [Zone Down] or [Channel Up]/ [Channel Down] buttons. 2 Press the PTT switch and speak into the microphone. Release the PTT switch to receive. ● The LED indicator lights red while transmitting and green while receiving a signal. This indicator can also be disabled by your dealer. ● For best sound quality at the receiving station, hold the microphone approximately 3 cm to 4 cm (1.5 inches) from your mouth. RECEIVING Select the desired zone and channel. If signaling has been programmed on the selected channel, you will hear a call only if the received signal matches your transceiver settings. 26
TRANSMITTING
1
Select the desired zone and channel using the
Selector
or
4-
way D-pad
and the
[Zone Up]
/
[Zone Down]
or
[Channel
Up]
/
[Channel Down]
buttons.
2
Press the
PTT
switch and speak into the microphone. Release
the
PTT
switch to receive.
●
The LED indicator lights red while transmitting and green while
receiving a signal. This indicator can also be disabled by your
dealer.
●
For best sound quality at the receiving station, hold the
microphone approximately 3 cm to 4 cm (1.5 inches) from your
mouth.
RECEIVING
Select the desired zone and channel. If signaling has been
programmed on the selected channel, you will hear a call only if
the received signal matches your transceiver settings.
26