Kenwood VR-616 User Manual - Page 20

Listening to radio broadcasts The receiver can store up to 40 stations in the memory and recall them by one-touch operation. Tuning radio stations MULTI CONTROL Presetting radio stations manually MEMORY BAND AUTO INPUT SELECTOR Joystick (MULTI CONTROL 5/∞) TUNING 1 / ¡ AUTO BAND TUNER 1Use the INPUT SELECTOR knob or TUNER key to select the tuner. 2Use the BAND key to select the desired broadcast band. Each press switches the band as follows: 1 FM 2 AM "AM" or "FM" indicator appears in the display 3Use the AUTO key to select the desired tuning method. Each press switches the tuning method as follows: 1 AUTO lit (auto tuning) 2 AUTO not lit (manual tuning) "AUTO" indicator lights up in the display. MULTI CONTROL 1Tune to the station you want to store. 2Press the MEMORY key while receiving the station. Blinks for 5 seconds Lights for 5 seconds Proceed to step 3 within 5 seconds. (If more than 5 seconds elapse, press the MEMORY key again). 3Use the MULTI CONTROL knob to select one of the station presets (1 - 40). 4Press the MEMORY key again to confirm the setting. • Repeat steps 1, 2, 3, and 4 to store as many stations as necessary. • If you store a station at a previously used preset, the previous station will be replaced by the new one. • Normally, set to "AUTO" (auto tuning). If the radio waves are weak and there is a lot of interference, switch to manual tuning. (With manual tuning, stereo broadcasts will be received in monaural.) 4Use the MULTI CONTROL knob or Joystick, or TUNING 1 / ¡ keys to select the station. Frequency display "ST." lights when a broadcast is being received in stereo. "TUNED" is displayed when a station is received. Auto tuning : The next station is tuned automatically. Manual tuning : Turn the knob (press the key) to select the desired station. 20 EN