Kenwood VR-616 User Manual - Page 36

Specifications AUDIO section Rated power output during STEREO operation 100 watts per channel minimum RMS, both channels driven, at 8Ω from 40 Hz to 20 kHz with no more than 0.7% total harmonic distortion. (FTC) Effective power output during SURROUND operation FRONT (40 ~ 20 kHz, 0.7% T.H.D. at 8Ω one channel driven 100 W + 100 W CENTER (40 ~ 20 kHz, 0.7% T.H.D. at 8Ω one channel driven 100 W SURROUND (40 ~ 20 kHz, 0.7% T.H.D. at 8Ω one channel driven 100 W + 100 W SUBWOOFER (80 Hz, 0.7% T.H.D. at 8Ω one channel driven) (VR-616 100 W Total harmonic distortion 0.05% (1 kHz, 50 W, 8Ω) Frequency response CD 20 Hz ~ 70 kHz, +0 dB, -3.0 dB Signal to noise ratio (IHF'66) CD 95 dB Input sensitivity / impedance CD 550 mV / 47 kΩ DVD/6CH INPUT 550 mV / 47 kΩ Output level / impedance TAPE REC 550 mV / 1 kΩ PRE OUT (SUBWOOFER) (VR-606 1.5 V / 2.2 kΩ Tone control BASS 10 dB (at 100 Hz) TREBLE 10 dB (at 10 kHz) Loudness control VOLUME at -30dB level 8 dB (at 100 Hz) DIGITAL AUDIO section Sampling frequency 32 kHz, 44.1 kHz, 48 kHz, 96 kHz Input level / impedance / wave length Optical 15 dBm ~ -21 dBm), 660 nm ±30 nm Coaxial 0.5 Vp-p / 75 Ω Caution : Read this page carefully to ensure safe operation. VIDEO section VIDEO inputs / outputs VIDEO (composite 1 Vp-p / 75 Ω S VIDEO inputs / outputs S VIDEO (luminance signal 1 Vp-p / 75 Ω S VIDEO (chrominance signal 0.286 Vp-p / 75 Ω FM tuner section Tuning frequency range 87.5 MHz ~ 108.0 MHz Usable sensitivity (MONO) 1.3 µV (75 Ω)/ 13.2 dBf (75 kHz DEV., SINAD 30 dB) 50dB quieting sensitivity STEREO 28 µV (75 Ω)/ 40.2 dBf Total harmonic distortion (1 kHz) MONO 0.5% (71.2 dBf input) STEREO 0.7% (71.2 dBf input) Signal to noise ratio (1 kHz, 75 kHz DEV.) MONO 75 dB (71.2 dBf input) STEREO 68 dB (71.2 dBf input) Stereo separation (1 kHz 40 dB Selectivity (±400 kHz 70 dB Frequency response 30 Hz ~ 15kHz), +0.5 dB, -3.0 dB AM tuner section Tuning frequency range 10 kHz step 530 kHz ~ 1,700 kHz Usable sensitivity (30% mod., S/N 20dB) ......... 16 µV / (600 µV/m) Signal to noise ratio (30% mod. 1 mV input 50 dB GENERAL Power consumption 2.2 A AC outlet SWITCHED total 150 W, 1.25 A max.) Dimensions W : . 440 mm (17-5/16") H : 143 mm (5-5/8") D : 303 mm (11-15/16") Weight (Net 7.7 kg (17.00 lb) Notes 1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. 2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature). 36 EN For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product. Model Serial Number