KitchenAid KBFN506EBS Installation Instructions - Page 5

Stainless Steel Series (42" [106.7 cm] Models) Features wraparound styling that complements the contoured door handles. This series provides a warm commercial-looking built-in refrigerator. KBFN402ESS, KBFN502ESS Black Stainless Steel Series (42" [106.7 cm] Models) KBFN502EBS Overlay Series (42" [106.7 cm] Models) Features factory-installed, overlay style trim, to provide a "frameless" look. This series requires the installation of custom panels, handles, and standoffs. KBFN402EPA, KBFN502EPA INSTALLATION REQUIREMENTS Tools and Parts IMPORTANT: Parts Needed ■■ Installer: Leave Installation Instructions with the homeowner. ■■ Homeowner: Keep Installation Instructions for future reference. Save these Installation Instructions for the local electrical inspector's use. Tools Needed Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. ■■ Cordless drill ■■ Drill bits ■■ Adjustable wrenches (2) ■■ Torx† T15 and T27 screwdrivers ■■ 11/32" nut driver ■■ 3/8", 1/4", and 1/2" open-end wrenches ■■ #8 x 3" (7.6 cm) wood screws (longer screws may be needed) (6) ■■ 2" x 4" x 32" (5 cm x 10 cm x 81 cm) wood board(s) (1 or 2) ■■ Make custom panels or consult a qualified cabinetmaker or carpenter to make the panels. Overlay Series: Make custom panels, or consult a qualified cabinetmaker or carpenter to make the panels. See "Installation Requirements" for more information. Stainless Series and Black Stainless Series are shipped complete. ■■ If you are connecting the water line directly to copper tubing and not to a shutoff valve, you need a ferrule, a union, and a 1/4" compression fitting. ■■ Phillips screwdriver ■■ 5/32" hex key ■■ Small level ■■ 1/4" and 5/16" socket drivers ■■ Appliance dolly ■■ Tape measure ■■ Utility knife †TORX is a trademark of Acument Intellectual Properties, LLC. 5