KitchenAid KBLS19KCMS Use & Care Guide - Page 7

2. Insert the overlay hooks into the top of the holes in the door. Push against the overlay frame to force the overlay hooks deeper into the door. Pull the overlay frame straight down to secure the overlay hooks to the door. 3. Using a Phillips screwdriver, attach the overlay plates to the bottom of the overlay frame and door as shown. 6. Using a Phillips screwdriver and three screws, attach the top hinge to the cabinet as shown. A B C D A B C D A. Overlay frame B. Door C. Overlay plates (2) D. Round-head screws (8) Install the Door IMPORTANT: To ensure proper operation, be sure to grease the top hinge, top spacer and washer with petroleum jelly. 1. Using a Phillips screwdriver and three screws, attach the top spacer to the door. 2. Using petroleum jelly, grease the bottom spacer hole and the bottom hinge pin. Align the washer with the bottom spacer hole. 3. Slowly lower the door straight and evenly onto the bottom hinge pin. Be sure the washer stays in place. Close the door. Be sure the door properly aligns to the cabinet. NOTE: Provide additional support for the door when moving the hinges. Do not depend on the door magnets to hold the door in place while you are working. 4. Using masking tape, secure the door to the cabinet before installing the top spacer as shown. E F A. Screws (3) B. Top hinge C. Washer D. Top spacer E. Door F. Overlay frame 7. Remove the masking tape from the door. Door Closing Door Closing Your wine cellar has four leveling legs. If your wine cellar seems unsteady or you want the door to close more easily, adjust the wine cellar's tilt using the instructions below. WARNING A B A. Top spacer B. Masking tape 5. Place the washer on the top spacer and align the holes. Grease the top hinge pin, top spacer and washer with petroleum jelly. Insert the top hinge pin into the washer and top spacer. Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 1. Plug into a grounded 3 prong outlet. WARNING Excessive Weight Hazard Use two or more people to move and install wine cellar. Failure to do so can result in back or other injury. 2. Move the wine cellar into its final location. 3. Turn the leveling legs to the right to lower the wine cellar or turn the leveling legs to the left to raise it. It may take several turns of the leveling legs to adjust the tilt of the wine cellar. 7