KitchenAid KBZU122VSS Use & Care Guide - Page 13
Installation, Instructions
UPC - 883049184401
View all KitchenAid KBZU122VSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
To convert to LP gas, the LP Gas Conversion Kit Part Number W10118099 must be used. Follow instructions included with kit. A Install Tank Tray for 20 lb LP Gas Fuel Tank For Models Equipped for Use with a 20 lb LP Tank 1. Position the tank tray for 20 lb LP gas fuel tank in the island cabinet. B D C A. Side burner gas pipe B. New CSA International approved "outdoor" flexible gas supply line C. Rear of side burner D. To local gas supply LP Gas Conversion Using a 20 lb LP Gas Fuel Tank To convert to LP gas, the LP Gas Conversion Kit Part Number W10118099 must be used. Follow instructions included with kit. A 20 lb LP gas fuel tank must be purchased separately. INSTALLATION INSTRUCTIONS Built-in Outdoor Side Burner Installation WARNING Excessive Weight Hazard Use two or more people to move and install side burner. Failure to do so can result in back or other injury. ■ Unpack side burner. Remove all packaging materials and remove side burner from carton. ■ Place side burner into outdoor enclosure, but leave enough room in back to connect to gas supply and electrical single prong plug-in. centerline of tank tray 20⁵⁄₈" (52.4 cm) 2¹⁄₄" (5.7 cm) A 18³⁄₈" (46.7 cm) B Front to back burner Side by side burner Dimension A 8 20.6 cm) 12 31.9 cm) Dimension B 16 41.1 cm) 25¹⁄₈" (63.8 cm) 2. Square the tank tray mounting brackets and mark the mounting hole locations in the island base. 3. Remove the top nuts (4) from the tank tray assembly and lift the tank tray off of the mounting brackets. A B C D E A. Top nut B. Tank tray C. Bottom nut D. Bolt E. Mounting bracket 13