KitchenAid KDTM704EBS Use & Care Guide - Page 14

FLEXI-FOLD DOWN™ Flexible Tines The row of tines on the left-hand and right-hand sides of the top rack can be adjusted to make room for a variety of dishes. To adjust the fold-down tines: 1. Grasp the tip of the tine that is in the tine holder. 2. Gently push the tine out of the holder. 3. Lay the tines down, toward the center of the rack. NOTE: The bottom rack may also have 1 or 2 rows of flexible tines located in the back of the rack. Follow the same instructions to adjust. Premium Adjustable 2-Position Top Rack You can raise or lower the top rack to fit tall items in either the top or bottom rack. Adjusters are located on each side of the top rack. Each adjuster has 2 preset positions. To raise the rack, press both rack adjusters and lift the rack until it is in the up position and level. To lower the rack, press both rack adjusters and slide the rack to its down position and level. Sliding Bowl Tines (on some models) Sliding lower-rack tines that move left or right to fit your dishes. You can use this feature to fit larger items like cereal bowls or other odd shaped items. CULINARY CADDY® Utensil Basket (on some models) Use the utensil basket to hold specialty cooking utensils (serving spoons, spatulas, and similar items), or overflow silverware items. The basket hangs on the bottom rack in the right-hand corner. Load the basket while it is on the bottom rack or remove the basket for loading on a counter or table. NOTE: Spin the spray arms. Be sure items in the basket do not stop the rotation of the spray arms. Dynamic Lower Spray Arm (on some models) The Dynamic Lower Spray Arm is motor driven and will not spin unless the dishwasher is running. The motor assures just the right spin for thorough and effective cleaning. NOTE: If the spray arm becomes blocked for any reason during the cycle, you may hear a ticking sound. Open the dishwasher and remove the blockage. Press START/ RESUME and close the door to continue the cycle. Removable Top Rack The removable top rack allows you to wash larger items such as pots, roasters, and cookie sheets in the bottom rack. IMPORTANT: Remove dishes prior to removing the top rack from the dishwasher. To remove the rack: To gain access to the removable tabs on the tracks/rails, pull the upper rack forward about halfway out of the tub. On one side, press the tab on the track in and pull up the front end of the rack out of the track. Then repeat this step on the other side to completely remove the front end of the rack. Then remove the rack by pulling the back end out using a forward and upward motion. To replace the rack: Pull the tracks forward about halfway out of the tub. Along the sides of the racks are round attachment tabs. Align the rack's back end attachment tabs with the cutout in the track. Push down into place. Pull the tracks completely out, and align the rack's front end attachment tabs with the cutout in the track. Push down into place. You will hear a snap when the front end of the rack is secured into place on each side. 14