KitchenAid KERS807SBL Installation Instructions - Page 11

Style 1: Power supply cord strain relief ■ Remove the knockout at the bottom of the terminal box for the 40-amp supply cord. ■ Assemble a UL listed strain relief in the opening. ■ Feed the flexible conduit behind the black horizontal cross brace and through the strain relief, allowing enough slack to easily attach the wiring to the terminal block. A A. UL listed strain relief ■ Feed the power supply cord behind the black horizontal cross brace and through the strain relief, allowing enough slack to easily attach the wiring to the terminal block. A B A. Black horizontal cross brace B. Flexible conduit ■ Tighten strain relief screw against the flexible conduit. A B A. Black horizontal cross brace B. Power supply cord ■ Tighten strain relief screw against the power supply cord. 5. Complete installation following instructions for your type of electrical connection: 4-wire (recommended) 3-wire (if 4-wire is not available) Electrical Connection Options If your home has: And you will be Go to Section: connecting to: 4-wire receptacle (NEMA type 14-50R) A UL listed, 250-volt minimum, 40-amp, range power supply cord 4-wire connection: Power supply cord Style 2: Direct wire strain relief ■ Remove the knockout as needed for the flexible conduit connection. ■ Assemble a UL listed conduit connector in the opening. A B 4-wire direct 5" (12.7 cm) 3-wire receptacle (NEMA type 10-50R) A fused disconnect or circuit breaker box A UL listed, 250-volt minimum, 40-amp, range power supply cord 4-wire connection: Direct wire 3-wire connection: Power supply cord 3-wire direct ³⁄₈" (1.0 cm) 3" (7.6 cm) A fused disconnect or circuit breaker box 3-wire connection: Direct wire A. Removable retaining nut B. UL listed strain relief 11