KitchenAid KERS807SBL Installation Instructions - Page 17
For direct-wired ranges
 |
UPC - 883049027029
View all KitchenAid KERS807SBL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
For direct-wired ranges: WARNING 5. Reconnect wiring (if necessary). See "Electrical Connection U.S.A. Only" section. 6. Check that anti-tip bracket is installed: ■ Look for the anti-tip bracket securely attached to floor or wall. ■ Slide range back so rear range foot is under anti-tip bracket. Electrical Shock Hazard Disconnect power before servicing. Replace all parts and panels before operating. Failure to do so can result in death or electrical shock. 1. Disconnect power. 2. Using two or more people, slide range onto cardboard or hardboard to perform cleaning or maintenance. 3. Disconnect wiring (if necessary). 4. Perform cleaning or maintenance. 7. Check that range is level and reconnect power. 17
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20 -
21 -
22 -
23
-
24
-
25
-
26
-
27
-
28
 |
 |
17
For direct-wired ranges:
1.
Disconnect power.
2.
Using two or more people, slide range onto cardboard or
hardboard to perform cleaning or maintenance.
3.
Disconnect wiring (if necessary).
4.
Perform cleaning or maintenance.
5.
Reconnect wiring (if necessary). See “Electrical Connection -
U.S.A. Only” section.
6.
Check that anti-tip bracket is installed:
■
Look for the anti-tip bracket securely attached to floor or
wall.
■
Slide range back so rear range foot is under anti-tip
bracket.
7.
Check that range is level and reconnect power.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.