KitchenAid KESK901SBL Installation Instructions - Page 9

10. Move range into its final position making sure rear leveling leg slides into anti-tip bracket. 11. Continue installing your range using the following installation instructions. Electrical Connection - U.S.A. Only Power Supply Cord WARNING A B A. Hold-down screws B. Terminal block cover 3. Add strain relief. Style 1: Power supply cord strain relief ■ Remove the knockout for the 40-amp supply cord. ■ Assemble a UL listed strain relief in the opening. Electrical Shock Hazard Disconnect power before servicing. Use a new 40 amp power supply cord. Plug into a grounded outlet. Failure to follow these instructions can result in death, fire, or electrical shock. Direct Wire WARNING A A. UL listed strain relief ■ Feed the power supply cord behind the black horizontal cross brace and through the strain relief, allowing enough slack to easily attach the wiring to the terminal block. Electrical Shock Hazard Disconnect power before servicing. Use 8 gauge copper or 6 gauge aluminum wire. Electrically ground range. Failure to follow these instructions can result in death, fire, or electrical shock. 1. Disconnect power. 2. Remove the terminal block cover screws located on the back of the range. Pull cover down and toward you to remove cover. A B A. Black horizontal cross brace B. Power supply cord ■ Tighten strain relief screw against the power supply cord. 9