KitchenAid KFIS29BBBL Installation Guide - Page 7

Backer and Spacer Panel Dimensions NOTE: The dashed lines represent the placement of the backer and spacer panels on the decorative panels. Backer and spacer panels should be centered vertically and horizontally. 2. Remove the side trim from each side of the freezer door. D D E A D B C C 3. Align the bottom edge of the door panel with the lower trim on the bottom of the freezer door. Center the panel on the freezer door. Dimension A B C D E Backer Panel 19" (48.3 cm) 31 79.9 cm) 67 172.5 cm) 14⁷⁄₈" (37.8 cm) 19¹⁄₂" (49.6 cm) Spacer Panel 18³⁄₈" (46.7 cm) 30³⁄₄" (78.1 cm) 66 169.1 cm) 14¹⁄₄" (36.2 cm) 18⁷⁄₈" (47.9 cm) Install the Door Panels NOTE: In the graphics throughout this section, dark gray represents the door trim and light gray represents the door panel. 1. Remove the upper trim from the top of the freezer door. 4. Reseat each side trim, making sure the trim clip slides inside the corner of the lower trim. A A. Trim clip 7