Kodak 5600 User Guide - Page 30
Troubleshooting - projector manual
UPC - 041771125677
View all Kodak 5600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Troubleshooting Consult this guide before calling for service. PROBLEM CAUSE CORRECTION Projector does not operate No power to projector Plug power cord into suitable electrical outlet. Set power switch to Lamp. No illumination on screen with slide in Power switch on Off or Fan projector gate Lamp burned out Set switch to Lamp. Install new lamp or lamp module Lamp not seated in socket Check lamp. Slide not in proper focus on screen focus. Slide itself not sharp Examine slide for proper focus. First slide in tray not properly focused Focus center of first slide manually. Slide in different type of mount from Focus manually. others Projection lens installed improperly Read and follow the instructions for installing the lens. Uneven edge-to-edge focus Slide itself is not sharp Examine slide. Curved field lens used with glass, plastic, or non-embosssed mounts Try a flat field lens. (See "Choosing a Curved- or Flat-Field Lens" on page 14.) Curved field lens used for rear projection Use a flat field lens. Lamp performance UInstall new lamp and try again. Autofocus has difficulty slide to slide Mixed open and glass slide mounts Do not mix open and glass mounts 26 KODAK CAROUSEL® Slide Projector